FORUMS
Post Reply Subscribe to Thread Email Thread

Blade switching on failure

23rd April 2012, 10:44 AM |#1  
OP Junior Member
Thanks Meter: 2
 
More
There are several situations for switch on failure:
1.The first situation is that switch on failure is caused by hardware issue, generally the screen of device cannot be lighten up with this situation, you can just replace the device;
2.The second situation is battery issue, generally the battery power is not enough, you just need to charge the battery or replace the battery;
3.The third situation is software issue, usually the screen can lighten up normally, but the device will freeze on uncertain interface, you can directly refresh the new version for this situation.
4.Besides, for software issue, refreshing device failure also can cause switch on failure, and also the screen cannot be lighten up, you need to return the device to get repaired.
 
 
23rd April 2012, 05:17 PM |#2  
Senior Member
Flag Sheffield, UK
Thanks Meter: 267
 
Donate to Me
More
but most common is switch failure. the power on button can get dirty/greasy & stop working on the blade, take the back off & use the switch with the back off to test.
Post Reply Subscribe to Thread
Previous Thread Next Thread
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes