Thread Closed

[S-OFF] Juopunutbear S-OFF

OP globatron

26th April 2012, 06:15 AM   |  #531  
jimczyz's Avatar
Senior Member
Thanks Meter: 97
 
610 posts
Join Date:Joined: Jun 2010
More
I would try using Hasoons AIO program and install the recovery. Or rename the recovery to PH85IMG and reboot into hboot.
26th April 2012, 06:17 AM   |  #532  
Member
Thanks Meter: 1
 
60 posts
Join Date:Joined: Oct 2011
^^^ yah Hasoons which is the toolkit . recovery top right coner... Try that first then do the kernel again.

make sure your plug-in on ur computer all the time coz it will re-run the beer to complete the install.

I remember what i did now.

----
bootloader.
installed Stock recovery from Hasoon toolkit..
then back to bootloader.
flashed the kernel Stock T-mobile.
waited for it to reboot, then the beer JuopunutBear software popup on computer. waited for it to complte
Last edited by microamd; 26th April 2012 at 06:25 AM.
26th April 2012, 06:54 AM   |  #533  
stew721's Avatar
Senior Member
Flag Sudbury, Ontario
Thanks Meter: 65
 
185 posts
Join Date:Joined: Feb 2012
Donate to Me
More
Well, I have S-OFF now with an ENG bootloader and SuperCID. However, I forgot to backup the internal SD and lost everything on it.

I'll have to see what Hexamob can recover from it, if anything, later. I had several GBs of NSFW media and would hate to have lost it all. The Amaze has a good camera; at least, my girlfriend says so anyhow.

I tried the wire for 20-30 minutes without joy; just an error code that S-OFF failed. I give it to my buddy to try and he got it on his first attempt. FFS!

--
Sent via Tapatalk 2 from my TELUS HTC Amaze 4G on the Fido network.
The Following User Says Thank You to stew721 For This Useful Post: [ View ]
26th April 2012, 07:01 AM   |  #534  
xologist's Avatar
Senior Member
Thanks Meter: 200
 
651 posts
Join Date:Joined: Jun 2009
This is what I just tried

Flash recovery from HBOOT
http://forum.xda-developers.com/show....php?t=1521169

On recovery, mount the SDcard (I had to format it)
Place NAND backup

Apply nand backup


Still get green arrows!!!

What can I DO???????????
HELP =/


:::When I go into HBOOT, it says "no ph8rmimg found":::


:::Edit 2:::

Flashed Kernel faux and it now works again.
Last edited by xologist; 26th April 2012 at 07:22 AM.
26th April 2012, 07:44 AM   |  #535  
coupetastic-droid's Avatar
Senior Member
Flag cali
Thanks Meter: 326
 
2,101 posts
Join Date:Joined: Dec 2010
so, i ran the jbear program, it detected the device and it went through all the commands. then some thing came up after the adb commands asking me if they were correct to press ctrl+c and that i had 5 seconds. but right away it went to the next line, some thing about redetecting and it started counting up to 45 but nothing would happen and it will redetect and count up to 45 again. after it did this a few times it asked to to connect device and install drivers. at this point it only goes to the black screen with green errows.

i already have drivers installed. everything seemed to go along fine till it started redetecting and counting up to 45.

i wasnt able to boot into recovery nor the device. i reflashed recovery and kernel and now it lets me boot into recovery but thats it.
it doesnt let me boot into the phone nor it runs jbear program anymore. it keeps asking me to connect and install drivers.

any help will be appreciated.

EDIT: everytime i run the jbear program now, it just goes straight to the htc splash screen and gets stuck there. jbear program then tells me to connect and install drivers.
Last edited by coupetastic-droid; 26th April 2012 at 07:56 AM.
26th April 2012, 09:01 AM   |  #536  
Senior Member
Flag Harlingen
Thanks Meter: 15
 
111 posts
Join Date:Joined: Jul 2009
More
alright guys...i've been trying this for 2 days...i'm currently on the ics ruu...i flashed superuser and have root...i flash the stock recovery from the ics ruu and now when i run jbear this is what i get...

======== ControlBear version 0.2.1 for JuopunutBear S-OFF ==========
Old beer detected...... Please wait......
Starting up......
Waiting device
Backing up......
Transferring backups....
Backup ok!!
Using eMMC dev /dev/block/mmcblk0
Using MMC dev /dev/block/mmcblk1
Boot partition is /dev/block/mmcblk0p22
Recovery partition is /dev/block/mmcblk0p23
Is information correct? You have 5 seconds time to press CTRL+C
Finding some beer.....
Found first....
Found second....
Found third....
Found fourth....
Hmmmm... where is that last one....... Wait a sec....
JuopunutBear is ready to go....
Rebooting.......
Waiting device....


oh and i'm stuck on the green arrows...
26th April 2012, 09:04 AM   |  #537  
coupetastic-droid's Avatar
Senior Member
Flag cali
Thanks Meter: 326
 
2,101 posts
Join Date:Joined: Dec 2010
Quote:
Originally Posted by ls1xtreme

alright guys...i've been trying this for 2 days...i'm currently on the ics ruu...i flashed superuser and have root...i flash the stock recovery from the ics ruu and now when i run jbear this is what i get...

======== ControlBear version 0.2.1 for JuopunutBear S-OFF ==========
Old beer detected...... Please wait......
Starting up......
Waiting device
Backing up......
Transferring backups....
Backup ok!!
Using eMMC dev /dev/block/mmcblk0
Using MMC dev /dev/block/mmcblk1
Boot partition is /dev/block/mmcblk0p22
Recovery partition is /dev/block/mmcblk0p23
Is information correct? You have 5 seconds time to press CTRL+C
Finding some beer.....
Found first....
Found second....
Found third....
Found fourth....
Hmmmm... where is that last one....... Wait a sec....
JuopunutBear is ready to go....
Rebooting.......
Waiting device....


oh and i'm stuck on the green arrows...

this is the exact same place im stuck in. i thought i was the only one.
26th April 2012, 09:55 AM   |  #538  
Senior Member
Thanks Meter: 17
 
372 posts
Join Date:Joined: Sep 2007
More
Quote:
Originally Posted by ls1xtreme

alright guys...i've been trying this for 2 days...i'm currently on the ics ruu...i flashed superuser and have root...i flash the stock recovery from the ics ruu and now when i run jbear this is what i get...

======== ControlBear version 0.2.1 for JuopunutBear S-OFF ==========
Old beer detected...... Please wait......
Starting up......
Waiting device
Backing up......
Transferring backups....
Backup ok!!
Using eMMC dev /dev/block/mmcblk0
Using MMC dev /dev/block/mmcblk1
Boot partition is /dev/block/mmcblk0p22
Recovery partition is /dev/block/mmcblk0p23
Is information correct? You have 5 seconds time to press CTRL+C
Finding some beer.....
Found first....
Found second....
Found third....
Found fourth....
Hmmmm... where is that last one....... Wait a sec....
JuopunutBear is ready to go....
Rebooting.......
Waiting device....


oh and i'm stuck on the green arrows...

I believe it was mentioned a couple times that S-Off could possibly be impossible to get if ICS RUU was flashed before gaining S-Off.
26th April 2012, 09:56 AM   |  #539  
jimczyz's Avatar
Senior Member
Thanks Meter: 97
 
610 posts
Join Date:Joined: Jun 2010
More
Globatron has confirmed it will work after updating.
26th April 2012, 10:02 AM   |  #540  
Amiganaut's Avatar
Junior Member
Flag Atlanta, GA
Thanks Meter: 1
 
10 posts
Join Date:Joined: Dec 2009
More
"Where do I get wire from?" Try Radio Shack.

Doesn't anyone keep a roll or two of spare wire and some wire cutters around in their toolkit anymore?

Thread Closed Subscribe to Thread

Tags
amaze s-off
Previous Thread Next Thread
Thread Tools
Display Modes