FORUMS

"Tighter" TPU case?

Thanks Meter: 22
 
By robroy90, Senior Member on 26th April 2012, 06:31 PM
Post Reply Subscribe to Thread Email Thread
I bought this cover from Amazon:

http://www.amazon.com/dp/B006Y5E07Y/...C1_cs_sce_dp_1

And it works ok, but it is a bit "loose" and the edges wander and separate a bit too much while holding/using it.

Does anyone else have a link to a similar silicon/TPU cover that has the IR port and is much tighter and slightly more difficult to remove/stays in place?

Thanks!

-Rob
 
 
26th April 2012, 11:44 PM |#2  
Senior Member
Thanks Meter: 91
 
More
That's one of the problems with silicone covers on these big screen devices -- great for bumps and knocks but physical qualities of the material does not lend it to a good fit when much of the material is missing and cut out. To get the strength needed the case ends up a bit bulky. I have the case pictured and the cut outs to access ports are annoying because of the thickness of the material.

I would like to see something with a thin TPU interior combined with a thin silicone exterior thus utilizing the best qualities of both materials.
28th April 2012, 01:05 AM |#3  
Senior Member
Thanks Meter: 71
 
More
I bought this one:
http://www.amazon.com/gp/product/B00...ls_o01_s00_i00

It's not as stiff as the TPU case i got for my 7 Plus, which means it's easier to get out, but it's also a little easier to push out of the way when you're near the card slots and IR. I do like that it's not as difficult to push the power and volume buttons like on that other case, though.
Post Reply Subscribe to Thread
Previous Thread Next Thread
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes