Welcome to XDA

Search to go directly to your device's forum

Register an account

Unlock full posting privileges

Ask a question

No registration required
Post Reply

Wolf's ultimate flash and downgrade guide (NO ROOT NEEDED) (root opportunity for .21)

OP wolf849

27th April 2012, 05:45 PM   |  #1  
OP Member
Thanks Meter: 220
 
68 posts
Join Date:Joined: Mar 2009
Donate to Me
More
Quote:

WARNING

This method will not work on any JB rom available, apparently google has patched the exploit.

Note that downgrading method for unrooted devices is highly experimental and may turn your device into worthless brick. Read this WHOLE thread carefully before you start doing anything with your Transformer.

MOD EDIT: It is reported that this method doesn't work with the new Jelly Bean firmwares on the TF201 and the TF300T,

Sorry, but I will not be able to support you between 3rd and 15th of May because I have to pass my final exams.
However feel free to post your questions in this topic I am sure that somebody will be able to help you.

Quote:

Description
Method 1 - Rooted Devices
This method allows you to flash any update released by ASUS without need for custom recovery.
ROOT is required to unlock mmcblk0p4 write access for dd.


Method 2 - UnRooted Devices
This method allows you to flash any update released by ASUS, no mater for SKU etc.
It uses file linking trick to unlock mmcblk0p4 write access even when su is not present.


Method 3 - UnRooted Devices - Recommended
This method allows you to directly flash the recovery even on unrooted device. This may be used next to root your TF by prepared su package.
It uses file linking trick to unlock mmcblk0p4 write access.

Quote:

Disclaimer

Despite both methods have been confirmed (by myself) to work, the whole process of flashing mmcblk0p4 with dd brings high risk of bricking device by for example file system corruption.

I do not take any responsibility for damaged or bricked devices. Before flashing you have to assume the risk and chances of geting bricked.

Under no circumstances should you brake cmd during blob file is flashed by dd. If that happens do not reboot. PM me and go on IRC

Quote:

Requirements

  • BLOB file (look at links box at the bottom for few)
  • ADB enabled
  • Root acces (only method 1)

Quote:

Notes

Sorry for the mistakes, but English is not my native language PM me if you find any so I will be able to correct them.

Before posting a question look into FAQ maybe it have been already answered.

Guide is inspired by Turge who wrote similar article for TFP (link here). However whole 2nd method was invented and described by me.

Thanks go to:
Code:
AndroidRoot.mobi - for RazorClaw ViperBoy - for viperMOD rooting tool jcase - for NachoRoot sparkym3 - for his ICS rooting methods Roach2010 - for all his work sbiriguda - who inspired me to dig around symlinking

Quote:

Instructions - Method 1 - Rooted
1. Upload the BLOB file to internal storage of your tab. (mounted as /sdcard)
2. Connect tablet to the computer and start ADB session.
3. When you will be in adb shell execute following comands:
Code:
su
dd if=/sdcard/blob of=/dev/block/mmcblk0p4
4. The command prompt will be empty as wnen nothing happen, do not panic wait until the end of the process. DO NOT INTERRUPT (it will take apx.3-10 min)
5. When you see the following message:
Code:
1066806+1 records in
1066806+1 records out
546204969 bytes transferred in 250.309 secs (2182122 bytes/sec)
(the numbers in resulted message may be diffrent but it has to have the same structure)
You can safety reboot the device by exiting shell and executing :
Code:
adb reboot
6. Once rebooted you will see ASUS EeePAD flashing progress bar. Be patient and wait till the end.
7. Tablet will reboot itself and start loading new system. (as it is first boot it may take few minutes)
8. Be happy from your new firmware.

ADDITIONAL OPTIONAL STEP

In some cases flashing previous firmware leaves data partition intact.
I suggest to clean it by booting with [vol down] and [power] pressed (you will see the info about the rom). Than wait until the screen with android and wipe data appear. Select wipe by switching with [vol down] and accepting with [vol up] pressed two times. It mostly happen when downgrading to HC from ICS.

Quote:

Instructions - Method 2 - UnRooted
1. Upload the BLOB file to internal storage of your tab. (mounted as /sdcard)
2. Connect tablet to the computer and start ADB shell session.
3. When you will be in adb shell execute following commands:
Code:
mv /data/local/tmp /data/local/tmp.bak
ln -s /dev/block/mmcblk0p4 /data/local/tmp
exit
4. Now reboot your tab through:
Code:
adb reboot
5. Once you see ASUS loading screen you should be able to start ADB shell session again (if not just wait), than (in shell) execute:
Code:
dd if=/sdcard/blob of=/dev/block/mmcblk0p4
6. The command prompt will be empty as wnen nothing happen, do not panic wait until the end of the process. DO NOT INTERRUPT (it will take apx.3-10 min)
7. When you see the following message:
Code:
1066806+1 records in
1066806+1 records out
546204969 bytes transferred in 250.309 secs (2182122 bytes/sec)
(the numbers in resulted message may be diffrent but it has to have the same structure)
You can safety reboot the device by exiting shell and executing :
Code:
adb reboot
8. Once rebooted you will see ASUS EeePAD flashing progress bar. Be patient and wait till the end.
9. Tablet will reboot itself and start loading new system. (as it is first boot it may take few minutes)
10. Be happy from your new firmware.

ADDITIONAL OPTIONAL STEP

In some cases flashing previous firmware leaves data partition intact.
I suggest to clean it by booting with [vol down] and [power] pressed (you will see the info about the rom). Than wait until the screen with android and wipe data appear. Select wipe by switching with [vol down] and accepting with [vol up] pressed two times. It mostly happen when downgrading to HC from ICS.

Quote:

Instructions - Method 3 - UnRooted

This will definitely not work with Transformer Prime continue only if you are owner of TF101 of TF101G

1. Upload the RECOVERYBLOB file to internal storage of your tab. (mounted as /sdcard)
2. Connect tablet to the computer and start ADB shell session.
3. When you will be in adb shell execute following commands:
Code:
mv /data/local/tmp /data/local/tmp.bak
ln -s /dev/block/mmcblk0p4 /data/local/tmp
exit
4. Now reboot your tab through:
Code:
adb reboot
5. Once you see ASUS loading screen you should be able to start ADB shell session again (if not just wait), than (in shell) execute (some times it gets longer, but do not panic it is normal):
Code:
 
dd if=/sdcard/recoveryblob of=/dev/block/mmcblk0p4
6. The command prompt will be empty as when nothing happen, do not panic wait until the end of the process. DO NOT INTERRUPT (it will take apx.3-10 min)
7. When you see the following message:
Code:
8860+1 records in
8860+1 records out
4536396 bytes transferred in 1.718 secs (2640509 bytes/sec)
(the numbers in resulted message may be different but it has to have the same structure)
You can safety reboot the device by exiting shell and executing :
Code:
adb reboot
8. Once rebooted you will see ASUS EeePAD flashing progress bar. Be patient and wait till the end.
9. Tablet will reboot itself and start loading new system. (as it is first boot it may take few minutes)
10. Be happy from your new recovery.

ADDITIONAL - ROOTING

11. Download this SU + Superuser.apk package and place it on internal memory or microsd
12. Boot to recovery. (turn off your TF and than boot with [vol down]+[power] pressed, once you see the letters identifying the system press [vol up]
13. Now you should be in custom recovery. Select 'Install from zip file' and then select the file on desired location internal or external.
14. Once flashing is done go back and select 'Reboot system'
15. Now you got freshly rooted Transformer. ENJOY

Quote:

BLOBs

BLOB file can be extracted from any update file. It is contained inside XX_epad-user-x.x.x.x.zip achive. Where XX (e.g WW or TW) refers to SKU of firmware and x.x.x.x to its version (e.g 9.2.2.3)

Or you can pick up a few here

Now they are ziped to reduce the sizes (MD5 value shows the control sum of each blob not zip) (sorry for hostings but I don't have space on dropbox any more, you may register to increase) (if you know faster mirror PM me)

NEW MIRROR SITE WITH ALMOST ALL FIRMWARES HERE

TF101/G BLOBs (Transformer)

Honeycomb

WW 8.6.6.19 - MD5: D63D60F6C71F5B614B338244D3788735 - or mirrors (1 2)

WW 8.6.6.23 - MD5: 1227F19BC4415661CACB05A483504953 - or mirrors (1 2)

Ice Cream Sandwich

US 9.2.1.11 - MD5: 4F6069430B20C35C8833F50DFA0FE0FD - or mirrors (1 2)

WW 9.2.1.17 - MD5: 5C78C28C31888943AB67CCE4B4448319

US 9.2.1.17 - MD5: 380CA6399374FF5F84154509365A83F7 - or mirrors (1 2)

TW 9.2.1.17 - MD5: CA52E4AD670DFFA29DC1CBA04A0A4164 - or mirrors (1 2)

WW 9.2.2.3 - MD5: 5D5A44069346C4D7D2740E4100520692 - or mirrors (1 2)

TW 9.2.2.3 - MD5: pending


TF201 BLOBs (Transformer Prime)

Honeycomb

WW 8.8.3.33 - MD5: 5136E579FAEDDFE15F6AAE623B6CB67D - (or mirrors 1 2)

Ice Cream Sandwich

WW 9.4.2.11 - MD5: B2668A3387924B19A91F74ABF5DBE4E8 - (mirror)

US 9.4.2.14 - MD5: EF2E635BD6921BFA9D01FC0E4DD0644B - (mirror)

WW 9.4.2.15 - MD5: 55122257B30E9376DF463F3C1A8BA702 - (or mirror 1 )

WW 9.4.2.21 - MD5: 1129DC2643BD0F5DC6C07B9A1B619548 - (or mirror 1 )

RECOVERYBLOBs (only for TF101)

Rburrow's Rogue XM Recovery (mirror) - MD5: 6EE759A84ED02F0D95A029EC245CFDC5 - thread

Hope it will help
Quote:

Results

Confirmed to work on both TF101/G (ASUS Transformer) and TF201 (ASUS Transformer Prime)

However keep in mind that TFP have to be locked in order to use second method otherwise you may brick your device.


It probably can be used with slider as well

I also confirmed that it is possible to root any official OTA (on TF101/G) by flashing recoveryblob containing custom recovery and than update.zip with su and superuser app.

Proven that Method 2 also work with 9.2.1.21 update to downgrade the software and reroot device. - thanks alvin612.

Method 2 may also work on locked Transformer Prime however be careful and read warning and disclaimer in this thread.

Click 'Thanks' if I helped you
Last edited by wolf849; 25th March 2013 at 09:08 PM. Reason: JB braeks explit
The Following 191 Users Say Thank You to wolf849 For This Useful Post: [ View ]
27th April 2012, 06:15 PM   |  #2  
sbiriguda's Avatar
Senior Member
Flag L'Aquila
Thanks Meter: 155
 
307 posts
Join Date:Joined: Feb 2011
More
Let me just say this: you are a freaking genius. I didn't even think of symlinking /dev/block/mmcblk0p4 to /data/local/tmp so it would change ownership and permissions on reboot. This is f*ing brilliant!

Moreover, if you have a blob for CWM you can also use the second method to install it on an unrooted device and then root it using the customary update.zip with su and superuser.apk (yes, even on 9.2.2.3 TF101Gs).

Again, great job!
The Following 3 Users Say Thank You to sbiriguda For This Useful Post: [ View ]
27th April 2012, 06:25 PM   |  #3  
Woody's Avatar
Moderator & RC/RT Committees - Particle Physics Gives me a Hadron
Flag Immersed in Dark Matter
Thanks Meter: 9,686
 
6,934 posts
Join Date:Joined: Nov 2010
A big **sigh**, finally a solution for non-root users/ non-NVflash-ables to get back. I am rooted and will always be as long as the expliot is there but this should help many, many non-rooted people that are frustrated with ICS.

Many thanks.
27th April 2012, 07:21 PM   |  #4  
Junior Member
Flag Guetersloh
Thanks Meter: 0
 
18 posts
Join Date:Joined: Mar 2012
More
Worth more than just using the thankometer - thanks for this.

Sent from my Transformer TF101 using XDA
27th April 2012, 08:33 PM   |  #5  
Senior Member
Thanks Meter: 5
 
143 posts
Join Date:Joined: Sep 2010
absolute genius!!!!! Thanks
27th April 2012, 11:47 PM   |  #6  
hearts king101's Avatar
Senior Member
Flag Jizan
Thanks Meter: 131
 
621 posts
Join Date:Joined: Nov 2010
More
Thumbs up Just GENIUS
you are genius bro thank u so much for this guide. I'll try it tomorrow bcuz it's late " 1:00 am " and report back later.

Thanks again

Edit: I couldn't wait until tomorrow so i said let's try it but something happened and now my tab is bricked ( Stuck on EEE Pad screen )
Last edited by hearts king101; 28th April 2012 at 12:09 AM.
The Following User Says Thank You to hearts king101 For This Useful Post: [ View ]
28th April 2012, 12:12 AM   |  #7  
OP Member
Thanks Meter: 220
 
68 posts
Join Date:Joined: Mar 2009
Donate to Me
More
Quote:
Originally Posted by hearts king101

you are genius bro thank u so much for this guide. I'll try it tomorrow bcuz it's late " 1:00 am " and report back later.

Thanks again

Edit: I couldn't wait until tomorrow so i said let's try it but something happened and now my tab is bricked ( Stuck on EEE Pad screen )

OK, easy come on #asus-transformer at webchat.freenode.net will try to manage something.
The Following User Says Thank You to wolf849 For This Useful Post: [ View ]
28th April 2012, 04:06 AM   |  #8  
Junior Member
Thanks Meter: 2
 
26 posts
Join Date:Joined: Apr 2011
Thumbs up OMG you saved my transformer!!!
Long story short, my tablet, as of 20mins ago, was in such an awkward status:
- has su and superuser.apk in /system/xbin
- all root checker apps say I'm NOT rooted
- on stock recovery but stock images put on external SD card won't get recognized
- whenever an app requests root, it got automatically denied by SuperUser.

and I saw this post....I'm back on 9.2.17 stock now!!

Thanks a million! ln -s...genius!!
28th April 2012, 06:04 AM   |  #9  
Thing O Doom's Avatar
Recognized Contributor
Flag Phoenix
Thanks Meter: 725
 
1,530 posts
Join Date:Joined: Mar 2012
Donate to Me
More
Nice exploit! I knew there was a way!
28th April 2012, 06:21 AM   |  #10  
kevchaps's Avatar
Member
Thanks Meter: 5
 
49 posts
Join Date:Joined: Jan 2012
Quote:
Originally Posted by alvin612

Long story short, my tablet, as of 20mins ago, was in such an awkward status:
- has su and superuser.apk in /system/xbin
- all root checker apps say I'm NOT rooted
- on stock recovery but stock images put on external SD card won't get recognized
- whenever an app requests root, it got automatically denied by SuperUser.

and I saw this post....I'm back on 9.2.17 stock now!!

Thanks a million! ln -s...genius!!

Did you start off with 9.2.1.21? Or just fixing your botched 9.2.1.17?

Post Reply Subscribe to Thread
Previous Thread Next Thread
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes