-Better root. It not install itself on every boot, just on the first boot. -You don't need to calibrate the screen on first boot, it do for itself. Feel free to re-calibrate in the menu. -Custom boot animation support, and there is an installed one. -Newer boot logo. -Fixed YouTube.apk as a system app. -Removed the stock launcher and replace it with Apex Launcher. This is a modified version of that launcher, but a lot better. -Titanium Backup updated. -I planned a lot of build.prop tweak but it override the market fix, so they are not included yet... Stay tuned, for next releases.
This ROM has to be flashed connected to the PC right? I have the problem that my SuperPad is not recognized by my PC (Win7), it does nothing at all and the tablet does not even show up as unknown device, so i cannot choose the drivers i downloaded. Any suggestion to solve this?
USB works pretty weird in this tablet. Simply plug the usb in the TOP slot and reboot your device and it will work. But if you just plug in it won't work. Anyway if you want to recognize as a flash device hold the reset + power + menu button then release the reset button and wait till a new storage will come up. Than you can release the power + menu. In this mod you can start flashing.
Thanks for your answer. So if i understand right i put the flash tool and the downloaded rom (vortex.pak) in the same folder in my external sd card by coonecting the tablet via usb upper port. Then i make the 3 button combo and enter flash mode where i can start the flash tool and flash your rom. Is that correct?
Make sure the tablet is off. Remove the external SD card. Plug in the tablet using the TOP USB port. Copy Vortex.pak to the folder that has the flash tool. The .pak and .ini files should be in the same folder. Start the Flash tool. this part needs four or five hands. Use a pen to hold in the Reset button at the SAME time hold in the POWER button and the MENU button. Release the RESET button after about five seconds. Keep the Power and Menu buttons pressed until you get New Hardware found and a new empty VDFu window pops up. Release the Power and Menu buttons. Start the flash tool. Menus are in Chinese. Click the Lower Right button. The progress bar should fill in about 30%. If there are any error windows, just click the button the window. The new blank VDFu window will close. Important. DO NOT CLOSE the flash tlool. Do the five hands step again to get the blank VDFu window. The left radio button will be active. Select it. Click the lower button on the right. Several small windows will pop up. Just click the button in the windows to close them. This process takes several minutes to complete. Do not interrupt the process. Do not close the flash tool. The Progess bar will fill. Cllose the the flash tool. Unplug the USB cable. Press and hold the Reset button for 5 seconds. Turn on the tablet. You should see a firmware update take place. Everything will be in Chinese. That is OK. Slide the lock to open the main screen. Select the settings icon. Scroll down to the language icon A capital A Press the top selection and select your language.
|Thread Tools||Search this Thread|