Originally Posted by mpiekp

Apart from the ics patch it works just the same as windows.

Actually no, at least in my case
I also have similar problems with 0.6.9.1 version under ubuntu 10.04, one ftf stops on 20% other stops on XY% and throws some red error(don't remember which one).
Both .ftf files are flashed ok under win7.
That's why I asked him.

Lol that's cause you're ubuntus two years old......
No issues here on 12.04 and proposed updates

Sent from my MT11i using Tapatalk

Originally Posted by mpiekp

Lol that's cause you're ubuntus two years old......
No issues here on 12.04 and proposed updates

oldness of my OS release or any other release shouldn't take any impact on program like that.. but it is
anw, downloading 12.04

Yeah age of os and how upto date it is are very relevant to a dynamic software project, now I would expect a version of the same age or that first worked on there to still work, but not necessarily updated releases.
Besides an os as easy as ubuntu to update, with a six monthly release cycle, if you use third party repos will be lagging behind as although canonical do LTS the tp and community repos don't. And your two years is just up so even if you wanted paid support you would be out of luck.

Sent from my MT11i using Tapatalk

Originally Posted by mpiekp

That log is not complete, flashtool had not finished, the patch is only necessary for ics.
Try again and just leave it a little longer don't have a copy of the log to hand but it should disconnect then detect in flash mode

Also run as admin is recommended for w7, if this fails uninstall the drivers reboot and try again.


Sent from my MT11i using Tapatalk

I left the NEO plugged for 30 minutes after the last message was showed. Nothings happen, then I unplugged the phone and flashtool log (that i havent yet) say:
flash procces end
disconected device

i will flash again and report the log

EDIT:
This is the log of flashtools:

30/020/2012 02:20:39 - INFO - <- This level is successfully initialized
30/020/2012 02:20:39 - INFO - Flashtool Version 0.6.9.1 built on 2012-04-09 19:22:19
30/020/2012 02:20:39 - INFO - You can drag and drop ftf files here to start flashing them
30/020/2012 02:20:45 - INFO - Device connected with USB debugging on
30/020/2012 02:20:47 - INFO - Connected device : MT15
30/020/2012 02:20:47 - INFO - Installed version of busybox : N/A
30/020/2012 02:20:47 - INFO - Android version : 2.3.4 / kernel version : 2.6.32.9-perf
30/020/2012 02:20:57 - INFO - Device disconnected
30/022/2012 02:22:19 - INFO - Selected MT15i_4.0.2.A.0.42_Global.ftf
30/022/2012 02:22:19 - INFO - Preparing files for flashing
30/022/2012 02:22:34 - INFO - Please connect your device into flashmode.
30/022/2012 02:22:50 - INFO - Device connected in flash mode
30/022/2012 02:22:51 - INFO - Opening device for R/W
30/022/2012 02:22:51 - INFO - Reading device information
30/022/2012 02:22:51 - INFO - Phone ready for flashmode operations.
30/022/2012 02:22:51 - INFO - Start Flashing
30/022/2012 02:22:51 - INFO - Flashing loader
30/022/2012 02:22:52 - INFO - Loader : S1_Loader_Root_773f - Version : R4A066 / Bootloader status : NOT_ROOTABLE
30/022/2012 02:22:52 - INFO - Flashing adsp.sin
30/022/2012 02:22:56 - INFO - Flashing kernel.sin
30/022/2012 02:22:58 - INFO - Flashing amss_fs.sin
30/022/2012 02:22:59 - INFO - Flashing fota1.sin
30/023/2012 02:23:00 - INFO - Flashing fota0.sin
30/023/2012 02:23:01 - INFO - Flashing amss.sin
30/043/2012 02:43:08 - INFO - Ending flash session
30/043/2012 02:43:08 - ERROR - 31 : Uno de los dispositivos conectados al sistema no funciona.
30/043/2012 02:43:08 - ERROR - Error flashing. Aborted
30/043/2012 02:43:08 - INFO - Device disconnected

This time i wait 20 minutes at 10%.
I didnt say before that i do that with and without sim or sd.
I cant post links so I write the ABOUT section of my neo:

bandbase:
8x55A-AAABQOAZM-203028D-64
kernel
2.6.32.9-PERF
SEMCUser@SEMCHost#1
compilation
4.0.2.A.0.62

Ok from that looks like the system.sin failed to flash, have you checked the md5 of the ftf. Was that as admin?
pull the battery, do not try and turn on try to flash just the system partition by unchecking everything else

Sent from my MT11i using Tapatalk

Originally Posted by mpiekp

Ok from that looks like the system.sin failed to flash, have you checked the md5 of the ftf. Was that as admin?
pull the battery, do not try and turn on try to flash just the system partition by unchecking everything else

Sent from my MT11i using Tapatalk

I tried to check MD5 of file but i didnt can find a Hash of the original .ftf .42, so i cant compare... I check the md5 in win 7 and thats my hash:

MD5: 63e687b6e571c941459494541f72311a
SHA1: 2dbaa48b260b571db921d7e0b01b960234da2197

I restore the phone with SEUS yesterday because I musted use that. You say to me that i didn "restore" with SEUS and I perform a flash again? Or you say that I have to flash only system..sin with WIPE DATA AND CACHE ticked...

Sorry for my english understanding and for the questions i do, Im so noob...

Thanks a lot for everything

No, if you've used sus your fine, but if you see that error when flashing that'd be what to do.
What version are you now on if 62 and you want root you will need to down grade.
Sent from my MT11i using Tapatalk

Originally Posted by mpiekp

No, if you've used sus your fine, but if you see that error when flashing that'd be what to do.
What version are you now on if 62 and you want root you will need to down grade.
Sent from my MT11i using Tapatalk

Yes im .62:


Uploaded with ImageShack.us

I want to flash it to .42 and then root. The problem is that i cant get 42, flashtool always stops randomly, at differents ".sim" with different %...
I dont know what more can I do. The 1st step fail to me

Do you have another pc to try it in?
If not you could make a bootable ubuntu USB/cd to try from.
What java do you have installed
Sent from my MT11i using Tapatalk