FORUMS

HTC’s New Ad Campaign And What It Really Means

HTC has just released three new blind test adverts comparing app loading … more

XDA Picks: Best Apps of the Week (June 27 – July 4)

Apps are at the front and center of any smartphone experience, and with over a … more

HTC One M9 Developer Edition Android 5.1 OTA

The Developer Edition of the HTC One M9 is receiving an over-the-air update to Android 5.1. … more

Index Project For XDA Device Subforums

Another ambitious project from the collaborative efforts of Recognized Contributors and Forum … more

[GUIDE]A500/501/G100W-Installing ICS V8 UNL-BL & CWM Or back to HC BL(24-6-2012)

3,937 posts
Thanks Meter: 16,959
 
By civato, Recognized Contributor on 27th April 2012, 02:37 PM
Post Reply Subscribe to Thread Email Thread
2nd May 2012, 10:21 AM |#141  
civato's Avatar
OP Recognized Contributor
Thanks Meter: 16,959
 
Donate to Me
More
Quote:
Originally Posted by sxm2

Sorry, your reply wasnt completely clear.

If I use the full root kernel by civato, then "You don't need to use my app to remount rw as you will be able to use the normal remounting procedures to remount r/w (in both cases the system partition starts off ro)"

You don't need remounter app with patched full root kernel.
The Following User Says Thank You to civato For This Useful Post: [ View ]
 
 
2nd May 2012, 10:34 AM |#142  
Member
Thanks Meter: 8
 
More
Quote:
Originally Posted by civato

You don't need remounter app with patched full root kernel.

Thanks civato
2nd May 2012, 09:54 PM |#143  
Pakobis's Avatar
Member
Flag Taranto
Thanks Meter: 11
 
More
ok... now my tab is on APX mode (wrong reset b. pressure... )

at the step 3 when i check with apx my cpuid, i can see my id but at the end of command i read this word:

file not found: bootloader.img
command failure: bootloader download failed

can i go on step 4?

Thanks
2nd May 2012, 10:24 PM |#144  
Zatta's Avatar
Recognized Contributor / Recognized Developer
Flag Sneek
Thanks Meter: 1,491
 
More
Maybe very offtopic, maybe not. I have modified the STTRA script so that I can use it to flash back and forth between three bootloaders and its corresponding recoveries.

The whole package I use on my WIN XP comes from here:http://forum.xda-developers.com/show....php?t=1594873
The modified run.bat is attached.
I have changed the name of bootloader V2 to ics_boot_unlk_V2.bin and V3 to ics_boot_unlk_V3.bin.
The recoveries in my package are: twrp-picasso-2.1.0.img for hcbootloader.bin and recovery_thor17_403.img for ics_boot_unlk_Vx.bin. I use TWRP because the first build of CM9 wouldn't flash on the thor's recovery for hc.
Attached Files
File Type: zip run_all.zip - [Click for QR Code] (1.1 KB, 40 views)
2nd May 2012, 10:29 PM |#145  
civato's Avatar
OP Recognized Contributor
Thanks Meter: 16,959
 
Donate to Me
More
Quote:
Originally Posted by Zatta

Maybe very offtopic, maybe not. I have modified the STTRA script so that I can use it to flash back and forth between three bootloaders and its corresponding recoveries.

The whole package I use on my WIN XP comes from here:http://forum.xda-developers.com/show....php?t=1594873
The modified run.bat is attached.
I have changed the name of bootloader V2 to ics_boot_unlk_V2.bin and V3 to ics_boot_unlk_V3.bin.
The recoveries in my package are: twrp-picasso-2.1.0.img for hcbootloader.bin and recovery_thor17_403.img for ics_boot_unlk_Vx.bin. I use TWRP because the first build of CM9 wouldn't flash on the thor's recovery for hc.

Very on-topic , will link this post in th OP , Thanks.
2nd May 2012, 11:11 PM |#146  
Senior Member
Flag Shake City
Thanks Meter: 458
 
More
Quote:
Originally Posted by Pakobis

ok... at the step 3 when i check with apx my cpuid, i can see my id but at the end of command i read this word:............
can i go on step 4?
Thanks

Quote:

by civato...STEP 3
If your SBK is good you get your system information and you will see your chip uid with some more stuff.

you are seeing your id that's the main thing....you may proceed....
The Following User Says Thank You to dibb_nz For This Useful Post: [ View ]
3rd May 2012, 12:42 AM |#147  
BakaNeko59's Avatar
Senior Member
Flag Bremerton, WA
Thanks Meter: 62
 
More
Blackthund3r,s APX Flash Tool needs a flashier name. I suggest (drum roll please)... Blackthund3r`s Root `n` Boot!!!

Sent from my A500 using XDA Premium HD app
The Following User Says Thank You to BakaNeko59 For This Useful Post: [ View ]
3rd May 2012, 01:10 AM |#148  
Senior Member
Flag Shake City
Thanks Meter: 458
 
More
excellent
3rd May 2012, 07:22 AM |#149  
blackthund3r's Avatar
Senior Member
Thanks Meter: 456
 
Donate to Me
More
Quote:
Originally Posted by BakaNeko59

Blackthund3r,s APX Flash Tool needs a flashier name. I suggest (drum roll please)... Blackthund3r`s Root `n` Boot!!!

Sent from my A500 using XDA Premium HD app

Lol me gusta!

Maybe ICS Root and the A500 APX Flash Tool should be the Root 'n' Boot Suite?
(Along with, of course, my new tool which is in the works )

Sent from my Iconia A500 using Tapatalk 2
Last edited by blackthund3r; 3rd May 2012 at 07:27 AM.
3rd May 2012, 09:49 AM |#150  
civato's Avatar
OP Recognized Contributor
Thanks Meter: 16,959
 
Donate to Me
More
Quote:
Originally Posted by Zatta

Maybe very offtopic, maybe not. I have modified the STTRA script so that I can use it to flash back and forth between three bootloaders and its corresponding recoveries.

The whole package I use on my WIN XP comes from here:http://forum.xda-developers.com/show....php?t=1594873
The modified run.bat is attached.
I have changed the name of bootloader V2 to ics_boot_unlk_V2.bin and V3 to ics_boot_unlk_V3.bin.
The recoveries in my package are: twrp-picasso-2.1.0.img for hcbootloader.bin and recovery_thor17_403.img for ics_boot_unlk_Vx.bin. I use TWRP because the first build of CM9 wouldn't flash on the thor's recovery for hc.

Ok m8 but could you upload your package , so I don't have to do it ?
Post Reply Subscribe to Thread
Previous Thread Next Thread
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes