16Gb Working version

---

I have prepared a version that works well in the Folio of 16 GB, I hope that is helpful for those who do not worked before.

This tested in two different Folio 16Gb and one 8Gb, and ICS can install without problems.

Of course all the merits are for puppet13th for their original work and yellowumbrella for his patience testing it

Edit: File uploaded again, small bug fixes

Originally Posted by botto00

I have prepared a version that works well in the Folio of 16 GB, I hope that is helpful for those who do not worked before.

This tested in two different Folio 16Gb and one 8Gb, and ICS can install without problems.

Of course all the merits are for puppet13th for their original work and yellowumbrella for his patience testing it

Great stuff botto, thanks for the amazing support. I'll give this a spin this afternoon and let you know if it works correctly.

Originally Posted by botto00

I have prepared a version that works well in the Folio of 16 GB, I hope that is helpful for those who do not worked before.

This tested in two different Folio 16Gb and one 8Gb, and ICS can install without problems.

Of course all the merits are for puppet13th for their original work and yellowumbrella for his patience testing it

Edit: File uploaded again, small bug fixes

Wonderful, I works perfect. Great job Botto

Originally Posted by davidgarant

Wonderful, I works perfect. Great job Botto

Thank them especially puppet13th
32 downloads and a person who says it works. I just hope that do not fail to the other 31

ok, Im pretty sure I´ll be trolled , but the need for information is greater:

What is exactly NVFlash?

I tried to Google it before posting, and I got this answer:

"Nvflash is a low level formatting and imaging tool"

Didnt help much. What does it do? What is it for?

Thanks a lot!

Originally Posted by radi8

ok, Im pretty sure I´ll be trolled , but the need for information is greater:

What is exactly NVFlash?

I tried to Google it before posting, and I got this answer:

"Nvflash is a low level formatting and imaging tool"

Didnt help much. What does it do? What is it for?

Thanks a lot!

It is a tool to prepare the tablet from APX mode

DO NOT USE IF YOU DO NOT NEED

When you go into mode APX (4 x Power and vol +) this is the only way to recover it.

It is relatively easy to accidentally enter into this mode, as fastboot mode is 3 x Power and vol +

From the APX mode you program the bootloader partition table etc ...
For a bug to enter this mode in the Talet erases all information, so it is necessary to recover

Sorry for my English, but I think it it is understood

Originally Posted by botto00

It is a tool to prepare the tablet from APX mode

DO NOT USE IF YOU DO NOT NEED

When you go into mode APX (4 x Power and vol +) this is the only way to recover it.

It is relatively easy to accidentally enter into this mode, as fastboot mode is 3 x Power and vol +

From the APX mode you program the bootloader partition table etc ...
For a bug to enter this mode in the Talet erases all information, so it is necessary to recover

Sorry for my English, but I think it it is understood

Thanks a lot for the explanation, now I understood!

All,

I have restored my lads Folio 100 from a brick today, it would only show a white LED - absolutely NOTHING else.

It hasn't worked for about 6 months.

Used this thread and he's now using it with the latest ICS ROM!

Took about 30 mins maximum...

Tremendous work, thank you very much

hello puppet13th,

unfortunately one day after installing and running cm10 my tablet did not start up correctly, all i got is a black screen, no logo, nothing.

when i try nvflash i only get this:

Nvflash started
rcm version 0X20001
System Information:
   chip name: t20
   chip id: 0x20 major: 1 minor: 2
   chip sku: 0x8
   chip uid: 0x1700614742c001d7
   macrovision: disabled
   hdcp: enabled
   sbk burned: false
   dk burned: false
   boot device: emmc
   operating mode: 3
   device config strap: 0
   device config fuse: 0
   sdram config strap: 0

sending file: new.bct
- 4080/4080 bytes sent
new.bct sent successfully
odm data: 0xc0075
downloading bootloader -- load address: 0x108000 entry point: 0x108000
sending file: bootloader.bin
/ 2097152/2097152 bytes sent
bootloader.bin sent successfully
waiting for bootloader to initialize
bootloader downloaded successfully
setting device: 2 3
creating partition: BCT
failed executing command 16 NvError 0x120002
command failure: create failed (bad data)
bootloader status: failed to create the partition (code: 10) message: nverror:0x
42000 (0x37042000) flags: 0

do you have any suggestions?
note tha the light is orange, not white.

thanks&regards
peter