finally downloaded beta 2 .can i just install on beta 1 without factory reset?
finally downloaded beta 2 .can i just install on beta 1 without factory reset?
Does anybody wanna set up a new link for the firmware update? Freeza's link doesn't work anymore. Dropbox disabled it due to traffic.
---------- Post added at 11:23 AM ---------- Previous post was at 11:21 AM ----------
That's what I got to. I just kept clicking until it worked lol.
Beta 2 is no good do not flash it.... The file is incomplete
Sent from 1985!
Yea, just wipe caches, and do me a favor, if it flashes without issue, report back
http://xdaforums.com/showpost.php?p=25675381&postcount=228Think firmware also on androidfilehost.com, can't verify if same. Hope helps
Sent from my EVO 3D S using Tapatalk 2 Beta-6
just flashed myne hope no restarts or anything im scared
Cuz if it Restarts like it did the first one im screwed cuz i now have no way to bring it back
---------- Post added at 05:35 PM ---------- Previous post was at 05:33 PM ----------
HTC EVO 3D Currently on beta 2 when ran through on flash image gui flashing kernal then going into 4ext build 102 and running the rom it gets to setup again and says custimization then restarts Just like last time.
IM ABOUT TO GIVE UP ALL HOPE ON THIS DAM ROM. Ive never had this much trouble flashing a dam rom.
Please help me what am i doing wrong
Thank you. I haven't been around lately. I've been masterminding my touchpad. Kinda left my 3d in the dark. Lol
just flashed myne hope no restarts or anything im scared
Cuz if it Restarts like it did the first one im screwed cuz i now have no way to bring it back
---------- Post added at 05:35 PM ---------- Previous post was at 05:33 PM ----------
HTC EVO 3D Currently on beta 2 when ran through on flash image gui flashing kernal then going into 4ext build 102 and running the rom it gets to setup again and says custimization then restarts Just like last time.
IM ABOUT TO GIVE UP ALL HOPE ON THIS DAM ROM. Ive never had this much trouble flashing a dam rom.
Please help me what am i doing wrong
live update beta 2
no bootup sound.
optimizing apps 224 apps
3d works
======================== viperROM IC3D Beta 3.1 ============================
#Updated from Beta 3
--------------------
* Updated viperControl (root check, code cleanup) - forgot to put this in Beta 3!
#Added
------
* Roaming Options
* Focus in Camera
======================== viperROM IC3D Beta 3 ============================
#Updated from Beta 2
--------------------
* Updated apps
* Updated viperControl (root check, code cleanup)
* Fixed Voice Search
#Backend Enhancements
---------------------
* Fixed reboot issue upon first flash
* Increased sampling_rate for ondemand governor
* Increased up_threshold for ondemand governor
* Removed Tell HTC from setup
* viperROM wallpaper set as default
#Added
------
* Added Leedroid Tweaks
* Added viperROM wallpapers to "HTC Wallpapers"
* Added Flashlight, aLogcat, Dropbox, and GooManager
* Added stock battery with percentages
#Removed
--------
* Removed Virgin Mobile VVM (replaced with Sprint version)
======================== viperROM IC3D Beta 2 ============================
#Updated from Beta 1
--------------------
* Updated apps
* Updated hosts file (no ads)
* Updated viperControl (better voltage detection, disable features not yet implemented in ICS builds)
#Backend Enhancements
---------------------
* Set deadline as default scheduler
* Battery saving settings when conservative is set for screen off (default)
* Tweaked ondemand governor for battery life
* Tweaked settings within ramdisk
#Added
------
* Added ICS keyboard
* Added support for GooManager
* Added init.d support
* Added 5MB MMS
* Added white overscroll
* Added battery percentages
#Removed
--------
* Removed SuperSU, revert to old Superuser
* Removed some unneeded files
* Removed boot sound
* Removed unneeded files in viperROM folder
======================== viperROM IC3D Beta 1 ============================
#Added from RC2
---------------
* /data folder
* vc
* viperROM boot and down animation
* init.d folder
* virtuous_oc folder
* sysctl.conf
* /system/xbin folder
* build.prop tweaks
* ext4 optimizations
#Changed from Joel's build
--------------------------
* Move su from /system/xbin to /system/bin
* Add sh to /system/bin
* updater-script changes
Download Beta 2 - Mirror1, Mirror2 - md5sum: CDBB5605AB8E399F9C442D2880D4E1FD
Download Beta 1 - http://bit.ly/KcH8VG
Q: What makes this ROM different than all the other ROMs?
A: First and foremost, you will get the best support from the viperROM Team (-viperboy- and Vinchenzop). We personally reply to almost every post and we're always in the thread trying to help out. If you have to wait more than an hour or so for your question to be answered, that is unusual! What else is different??
- The inclusion of the OC Daemon for unprecedented battery life and performance
- The custom viperControl script that handles the OC daemon, bloat, and removed app management (more to come too!)
- A highly tuned system for incredible smoothness
Q: Do I really need to wipe coming from another version of viperROM?
A: I always recommend that and that is how I test my ROMs. You may be not have any issues if you don't wipe, but you might.
Q: Where are all the cool add-ons?
A: Check post 4 for more information on how to set up and use the viperROM Updater.
Q: What is battery calibration and should I do it?
A: Yes!! If you aren't getting wonderful battery life or you think you can do better, do it! Here is the method I have used even back to my EVO 4G and it has always done well by me: Wipe battery stats (from recovery, or Battery Monitor Widget can do it [Menu > Statistics] and it doesn't matter what percentage you're at when you do so. Let the phone die and then fully charge. Take it off the charger and don't plug it in until it dies again, then fully charge. Your next charge cycle will be much better!
What some people don't understand is that you're not calibrating the battery as you are calibrating the phone. When you wipe and do this procedure, the phone reads where the max and min voltages are so it can report battery stats accurately.
Q: What is the deal with tethering?
A: As of right now, native tethering isn't unlocked. The included WiFi Tether should work just fine. You may need to play with the settings, possibly enabling "Routing Fix" and "Enable MSS Clamping"
Q: What kernel should I use with this ROM?
A: Chad.goodman has some cool kernels, but since there is no source as of this writing, I would recommend the stock kernel.
Q: Does 3D, 4G, everything work with this ROM?
A: Yes, everything works now. There may be a few bugs here and there because of the leak this was based on, but they won't be major bugs.
Q: I'm getting less than great battery life, what is the deal?
A: Battery life is affected by many things, such as screen-on time, signal strength, etc. Be sure that you do not have any rogue apps by checking for wakelocks with BetterBatteryStats found Here
Q: Do any themes work with this ROM?
A: The only mods and themes that we can be sure will be compatible with viperROM are the ones that are found within the viperROM Updater app. If there is a theme that you would like to try, make a nandroid and try it. If it doesn't work, restore your nandroid.
Q: Where can updates be found for the ROM?
A: Updates can be found in the thread,or directly through the viperROM Updater app,refer to the 4th post for more information. As of right now, the Updater will not work on ICS. We will likely be switching to GooManager for updates because it has more features.
Q: I have the dreaded 1.5 HBOOT, how do I flash this ROM?
A. Please refer to This Thread for more detailed information. You can also downgrade your bootloader now to 1.4! Please see here and here for more information.
Q. I'm new here, what is root?
A. Many answers can be found in more detail in This Thread
Q: My CRT animations don't work...what am I doing wrong?
A: This has not yet been implemented into the ICS builds yet.
Q: I would like to suggest something be fixed/updated/added to the ROM. How do I do that?
A: Please submit it to the viperROM Google Code page so we can track it. Please make sure to mention it in the thread as well so we are aware of it!
Q: What are all of the governors, schedulers, and other kernel tweaks I keep reading about?
A: Refer to this thread for any information regarding kernel tweaks.
- Adjust the OC Daemon
- Change schedulers
- Adjust voltage (if on a custom kernel)
- Manage removed apps
Freeze any app on the phone- NOTE: Not available on ICS yet!Modify lock screen text- NOTE: Not available on ICS yet!- Run "fix permissions" (for FC issues)
- Adjust the capacitive button brightness
- Edit some features in build.prop
- Manage the hosts file
To access viperControl:
- Open up Terminal Emulator
- Type "su" (without the quotes and grant it Superuser access if you haven't already)
- Type "vc" (without the quotes)
- Open up Terminal Emulator
- Type "su" (without the quotes and grant it Superuser access if you haven't already)
- Type "vc" (without the quotes)
- Enter "1" (without the quotes) and you will see all of your options
cat /sys/devices/system/cpu/cpu0/cpufreq/scaling_cur_freq
cat /sys/devices/system/cpu/cpu0/cpufreq/scaling_governor
cat /sys/devices/system/cpu/cpu0/cpufreq/scaling_min_freq
cat /sys/devices/system/cpu/cpu0/cpufreq/scaling_max_freq
- You MUST flash a custom kernel to overclock! The ROM includeds the stock kernel that is not capable of overclocking. Well why do you call it the "OC Daemon" then?? Because I didn't make it and that's what they called it AND the daemon is capable of controlling OC. Makes sense to me. If you want to overclock (after flashing a custom kernel, of course), run the script and change the MAX awake to whatever OC you would like.
- The phone will boot up and detect if you're using SetCPU or other CPU apps. If you are, the daemon will be DISABLED automatically. If you aren't, the daemon will be enabled.