Originally Posted by framir
What do you try?
I'm trying force conservative and for now very well!
Ilba you what advice?
Bye and thank you for your wonderful work
i advice the stock script in OP.. because it has a better one configuration for lowering power consuption in standby.. about 50ma in standby means 50mAh per hour.. 1520 / 50 = 30 hours of standby
(i have about 30mA with UV)
the goal is to have a conservative governor + low frequency, maxfreq is at 540mhz..
if you use the conservativeboost
, it has a faster ramping up, with 1.5ghz of maxfreq
the badass is the worst for battery performance because, badass is a governor witch use the ondemand system, so, when system need little power, it increase frequency at maxfreq.. even i lock the first freq at 384, when system needs more than 192, it comes to 384 too fast than conservative.. if system need more than 384, it comes to 756, and not at 432..
conservative increments frequency side by side.. badass and ondemand increments at maxfreq.. so.. with badass one.. you have more speed up performance, with much more power consuption
p.s. with conservative boost if system need, for example, 1ghz, it could rump ap at 1 ghz, it's not so fast as a badass or ondemand configuration, but, it's the same..
if you can.. i advise the stock in OP.. or try the conservativeBoost
p.s. guyz.. yesterday i got 4.5 hours of screenON with data active and 2.5 hours of web browsing witch huge UV and anker battery