I've built an update-script which writes the module into "/system" partition.
In case of soft-brick, i've built another script which erases the file.

I've flashed it on CM7 ( 15th of october ) and it worked as the fix is already embedded in the ROM.
Let me know whether it works with other ROMs.

P.S. Scripts are written in Edify syntax.
Update: i forgot to include the init.d script that loads the fix once the device is on.
Now i've fixed. It should work!

Could u please drop a few words about install procedure? Thx.

Originally Posted by toffifee63

Could u please drop a few words about install procedure? Thx.

You've only to flash the zip through clockwork recovery mod.

Originally Posted by carlo93

I've built an update-script which writes the module into "/system" partition.
In case of soft-brick, i've built another script which erases the file.

I've flashed it on CM7 ( 15th of october ) and it worked as the fix is already embedded in the ROM.
Let me know whether it works with other ROMs.

P.S. Scripts are written in Edify syntax.
Update: i forgot to include the init.d script that loads the fix once the device is on.
Now i've fixed. It should work!

I've been looking on github on the CM7 project, and unfortunately it seems that there is not ONLY mmcfix.ko needed. We must figure out which files are needed in order for the fix to work :/ (i'm thinking of this "hangs.c" file if i remember correctly that appears in the C code in mmcfix.ko... I'll have a talk to quarx.
Sorry for the time it takes, i'm quite busy with my studies right now, but i haven't forgot you guys =).

Solved!!

---

i figure out:

please, see this post

http://forum.xda-developers.com/show....php?t=1596997

Originally Posted by espaciosalter20

i figure out:

please, see this post

http://forum.xda-developers.com/show....php?t=1596997

Oh, it wasn't as hard as i thought then :/..i was going waaay complicated in the init scripts ><. Anyway well done

Motorola Defy, CM7 @ 1Ghz + CM9 multiboot
[Guide] Install double boot CM7 + CM9
[Guide][Root needed] Unsimlock your Defy

Originally Posted by espaciosalter20

i figure out:

please, see this post

http://forum.xda-developers.com/show....php?t=1596997

I can't post/reply at Development group, so I post here. The patch still have problem. After apply this path on MS2Ginger 3.0, any install app action from SD card will cause reboot problem. My phone is defy with red lens, and the sd card is transcend 16G c10 card.

need this fix, don't have a reader...

my SD cards were all recognised on stock froyo (not sure of build, possibly taiwan retail):? but now after new eclair and froyo sbfs the sdcards not recognised...weird huh?

I have a class 10 16GB.
The stock Froyo SEA 15 hangs often.... yesterday the defy said that SD card is damaged... but I did not format it and removed sdcard and put it in Nokia E5 and to my surprise it was working perfect there....
I have not installed your fix or any mcc fix till now.

This FIX is desparately needed.

For those who get the error that SD Card is damaged... please dont format it in your defy.
Use a computer or other mobile to format the sd card.

OK Guys got solution in this thread:
http://forum.xda-developers.com/show...00&postcount=2

Copy mmcfix.ko & symsearch.ko in /system/lib/modules and change the permissions to rw r r for both files.
Modify load_modules.sh as mentioned below and set permission as rwx r-x r-x

So just add the following lines in load_modules.sh files of /system/bin so it looks like this:

#!/system/bin/sh
export PATH=/system/bin:$PATH

# Install GAN virtual interface kernel module
if [ -e /system/lib/modules/kineto_gan.ko ]; then
insmod /system/lib/modules/kineto_gan.ko
insmod /system/lib/modules/symsearch.ko
insmod /system/lib/modules/mmcfix.ko
fi

Enjoy !!