Originally Posted by detule

Cool, I am curious if you'll still have random reboots as with other builds.

I've been up and running for 13 hours without a reset or SOD. So far so good.

Now, I've noticed two things:

1. Battery drains fast even when phone is sleeping. I took it of the charger at 1:00 a.m. and at 7:30 a.m. the battery was down to 25%. All that time the phone was sleeping on the table.

2. I'm having issues with de SD card. It gives me a message that the SD card has been removed without unmounting it first. It's done it 2 times so far. I have to take it out and put it back in so it gets recognized.

I'm posting 2 logs, one for each issue to see if something comes up.

Originally Posted by argenisaz

I've been up and running for 13 hours without a reset or SOD. So far so good.
.

Great, you are a good test subject to see if this new smd driver is effective.

My device just spent 8 hours off the charger, and it's at 75%. Use this app to enable sleep debugging for the front led to make sure your device goes to suspend, though I guess if it spends most of the time trying to re/establish data connection there's not much you can do.

As far as your SD card, not sure what's happening with that ->make sure you are not trying to use the external storage usb functionality, or perhaps you have some app installed that's causing issues.

Originally Posted by detule

As far as your SD card, not sure what's happening with that ->make sure you are not trying to use the external storage usb functionality, or perhaps you have some app installed that's causing issues.

I think that would be it. I did use the external usb storage functionality.

---------- Post added at 08:27 AM ---------- Previous post was at 08:22 AM ----------

Originally Posted by detule

My device just spent 8 hours off the charger, and it's at 75%. Use this app to enable sleep debugging for the front led to make sure your device goes to suspend, though I guess if it spends most of the time trying to re/establish data connection there's not much you can do.

I wish I got that that kind of battery life.

I installed the apk, set led regime 2 (amber awake/green asleep).

I'll report back.

UPDATE: there must be something keeping the phone awake. I get a green LED, then it goes amber for about 15 seconds. Then green again for about 2 minutes, then amber. Posting logs to see if something stands out.

Originally Posted by argenisaz

UPDATE: there must be something keeping the phone awake. I get a green LED, then it goes amber for about 15 seconds. Then green again for about 2 minutes, then amber. Posting logs to see if something stands out.

There's a lot of SD slot activity in your log, I assume that's because you haven't restarted since you tried to use mass storage and Vold is doing something incoherent. No idea, if it persists after a reboot, perhaps try formatting your sd card.

When in suspend, my device too occasionally wakes up (AMBER), but it's always on instructions from userland. The more apps I have installed the more I see the amber led flashing on from time to time. There is a lot of low memory warnings in your log (i count 188, versus only two currently in my log), pretty safe bet you are taxing your system.

Originally Posted by detule

There's a lot of SD slot activity in your log, I assume that's because you haven't restarted since you tried to use mass storage and Vold is doing something incoherent. No idea, if it persists after a reboot, perhaps try formatting your sd card.

You're right, I haven't restarted. That's because I'm trying to see how long it goes without an SOD or random reboot.

Originally Posted by detule

When in suspend, my device too occasionally wakes up (AMBER), but it's always on instructions from userland. The more apps I have installed the more I see the amber led flashing on from time to time. There is a lot of low memory warnings in your log (i count 188, versus only two currently in my log), pretty safe bet you are taxing your system.

I'm only syncing google services (gmail, contacts, calendar and reader) and a hotmail account (using exchange protocol with android email client).

As for apps, I've installed:

1. Friendcaster (no syncing and no notifications enabled)
2. Friendcaster chat (no syncing and no notifications enabled)
3. XDA app (no syncing and no notifications enabled)
4. Sense analog clock
5. Any.Do
6. Ex Dialer

Maybe one of those is giving me trouble.

Anyway, I'll have a better picture once I have to reboot. Thanks a lot for your help!

Guys, just want to report confirmed now it's booting now on my Rhod210, I've downloaded a bad file before I just re-download all the 3 latest files and flashed including gapps, and it booted..my initial observation is it is fast and stable..will test more..

Note: my radio version now is 4.49.25.95 I've flashed through sd card before installing this rom..I'm not recommending to flash the .95 radio but that's what I did..

Thanks..


Sent from my MSM using XDA

The reason why an "@" shows on pressing the fn key is because the \system\usr\keylayout is mapped for a raphael. Due the following files. raph_navi_pad.kl and microp-keypad.kl.

"key 215 AT" It should be key 215 ALT_LEFT


It's not mapped to our devices. It's mapped to the default in de keymaps folder..
"/system/etc/keymaps/default"

I have noticed that after rebooting I have to recalibrate the screen otherwise my touches are off. Is there any reason that the calibration does not survive reboots?

Hi Detule, I have problem with panel on/off on my rhod100. This issue has been solved in OMGB about 6 month ago. (I know - on another kernel series). Problem occurs increasingly and it is very annoying. Can you help me, please? Thanks in advance.

Originally Posted by milda25

Hi Detule, I have problem with panel on/off on my rhod100. This issue has been solved in OMGB about 6 month ago. (I know - on another kernel series). Problem occurs increasingly and it is very annoying. Can you help me, please? Thanks in advance.

I was expecting this - growing pains with rhod 100 users. Thankfully it looks like acl has either traced or disassembled the init sequences for your panels. I would like to make a minimal set of changes to our panel code, so as to try and not mess up haret users, which means me shooting you multiple kernels to see which one achieves desired results.

If you tell my your panel id i can PM you a test kernel.