By deep looking the log it seems to be that now we are able to access I2C bus of camera module. thats great.
My best wishes are with you.

Originally Posted by oisis

Now looks better:

<6>[    1.274108] [CAMDRV/CE147] ce147_init: E
<6>[    1.274169] [CAMDRV/CE147] __ce147_probe: E
<4>[    1.274230] [CAMDRV] config_camera_on_gpios 
<6>[    1.275024] [CAMDRV/CE147] ce147_sensor_probe: E
<6>[    1.275054] [CAMDRV/CE147] ce147_i2c_probe: E
<4>[    1.275085] [CAMDRV/CE147] ce147 i2c probe successful
<6>[    1.275146] [CAMDRV/CE147] cam_pm_lp8720_probe: E
<4>[    1.275146] [CAMDRV/CE147] lp8720 i2c probe successful
<3>[    1.280212] [CAMDRV/CE147] ce147_set_power: POWER ON.
<3>[    1.303222] [CAMDRV/CE147] ce147_set_power: POWER CONTROL END.
<4>[    1.303222] [CAMDRV/CE147] ce147_load_fw START
<4>[    2.010925] [CAMDRV/CE147] ce147_load_fw END
<3>[    2.011352] [CAMDRV/CE147] ce147_set_power: POWER OFF.
<3>[    2.016876] [CAMDRV/CE147] ce147_set_power: POWER CONTROL END.
<4>[    2.016906] [CAMDRV/CE147] ce147 sensor probe successful
<4>[    2.016906] [CAMDRV] config_camera_off_gpios 
<6>[    2.018646] [CAMDRV/S5KA3DFX] s5ka3dfx_init: E
<4>[    2.018737] [CAMDRV] config_camera_on_gpios 
<3>[    2.020294] [CAMDRV/S5KA3DFX] s5ka3dfx_sensor_probe E
<3>[    2.020324] [CAMDRV/S5KA3DFX] s5ka3dfx_i2c_init E
<3>[    2.020324] [CAMDRV/S5KA3DFX] s5ka3dfx_i2c_probe E
<3>[    2.020355] [CAMDRV/S5KA3DFX] s5ka3dfx_i2c_probe X
<3>[    2.025543] [CAMDRV/S5KA3DFX] S5KA3DFX sensor probe successful
<4>[    2.025543] [CAMDRV] config_camera_off_gpios

Still testing .

Post 160 update.

Originally Posted by alidsd

By deep looking the log it seems to be that now we are able to access I2C bus of camera module. thats great.
My best wishes are with you.

Thanks, need new kernel because missing some drivers. But for now litle break.

Driver for S5KA3DFX (UXGA camera) from Samsung Electronics


Driver for CE147 (5MP Camera) from NEC

^^ Dude, we already have the proper drivers in our kernel, so no need to search for them elsewhere.

https://github.com/arco/samsung-kern...edia/video/msm

Anyone care to test the following?

camtest1.zip

Originally Posted by arco68

^^ Dude, we already have the proper drivers in our kernel, so no need to search for them elsewhere.

https://github.com/arco/samsung-kern...edia/video/msm

Anyone care to test the following?

camtest1.zip

Unfortunately, camera isn't working (please, check attached logcat).

The same here, camtest1 doesn't work.

Some symbols are missing, so I have to add them one by one after looking in the log after each test.

camtest2.zip

Doesn't work =/

Sent from my GT-I9001 using XDA

could you explain how to add symbols, maybe someone who have i9001 would like to add them
it could be faster, i think

I need a log after each test. It's probably just 3 or 4 more.