Originally Posted by blcistheking

the US capacitive buttons dont seem to be working with this rom

Maybe this could help, I hope:

http://forum.xda-developers.com/show....php?t=1585551

Sent from my YP-G70

Originally Posted by SirRhor

Thank you for the reply.

I have an observation. In the description you state that US users should apply the ROM and then the proper kernel (Entropy's Daily Driver?).
Shouldn't be the kernel first and then the ROM?

Newcomers might get confused.

Sent from my YP-G70

Im pretty sure your supposed to flash the kernel after because the rom contains the wrong kernel. On my Galaxy s2 I always flash a particular kernel after because the rom contains a different one.

Originally Posted by EcHoFiiVe

Hey Rueben do you mind telling me/linking me to the method of porting you used for LewaOS? I want to port JoyOS to our Galaxy Players and I'm pretty shure that the porting methods are the same. Thanks in advance, peace.
-EcHoFiiVe

Yep here's the link: http://forum.xda-developers.com/show....php?t=1623464 Although this only ports the ROM over. You will need to remove apps, edit buid prop, add tweaks e.g. init.d and remove junk like phone service.

Originally Posted by blcistheking

the US capacitive buttons dont seem to be working with this rom

Have you tried flashing Entropys kernel after flashing the ROM.

Yeah, I just noticed the big "AOSP" on the title, haha.

EDIT: I wiped everything, flash the ROM, then Entropy's kernel and it doesn't boot.

Sent from my YP-G70

Originally Posted by SirRhor

Yeah, I just noticed the big "AOSP" on the title, haha.

EDIT: I wiped everything, flash the ROM, then Entropy's kernel and it doesn't boot.

Sent from my YP-G70

Ok thanks fir trying, ive just made a new ROM that i Think should work for the USA version. Heres the download link: http://www.mediafire.com/?tfsykmm80zqymgo

Try booting straight after flashing the ROM and if that does not work try flashing the kernel after flashing the ROM. Please get back to me on how it works thanks.

Note that the version i am asking you to flash is not final, e.g. it does not have tweaks etc.

Originally Posted by SirRhor

Yeah, I just noticed the big "AOSP" on the title, haha.

EDIT: I wiped everything, flash the ROM, then Entropy's kernel and it doesn't boot.

Sent from my YP-G70

Cm7 uses a different initramfs than stock, so you can't use entropy's kernel since this is based off of cm7. You have to stick with the kernel included with this rom.

Sent using Tapatalk

Originally Posted by klin1344

Cm7 uses a different initramfs than stock, so you can't use entropy's kernel since this is based off of cm7. You have to stick with the kernel included with this rom.

Sent using Tapatalk

Yea this ROM is CM7 based sorry had to clear that up. Also could some please try flashing this ROM for the USA version thanks

Heres the download link: http://www.mediafire.com/?tfsykmm80zqymgo

EDIT: I can really do anything with this ROM unitl I know if the version above works with the USA version

But in the meantime I have JOYOS Ported to our device, and all seems to be working well, no FC etc

Originally Posted by Rueben_

Ok thanks fir trying, ive just made a new ROM that i Think should work for the USA version. Heres the download link: http://www.mediafire.com/?tfsykmm80zqymgo

Try booting straight after flashing the ROM and if that does not work try flashing the kernel after flashing the ROM. Please get back to me on how it works thanks.

Note that the version i am asking you to flash is not final, e.g. it does not have tweaks etc.

I get this error when I try to install it:

assert failed: getprop("ro.product.device") == "blade" || getprop("ro.build.product") == "blade" || getprop("ro.product.board") == "blade"
E:Error in /sdcard/LeWa_ROM_v1.USA.VERSION.zip
(Status 7)
Installation aborted.


When I reinstalled the first version you uploaded without Entropy's kernel, it booted, but to tell you the truth, it has many cellphone related visual features for my taste.

I hope it helps.

Originally Posted by SirRhor

I get this error when I try to install it:

assert failed: getprop("ro.product.device") == "blade" || getprop("ro.build.product") == "blade" || getprop("ro.product.board") == "blade"
E:Error in /sdcard/LeWa_ROM_v1.USA.VERSION.zip
(Status 7)
Installation aborted.


When I reinstalled the first version you uploaded without Entropy's kernel, it booted, but to tell you the truth, it has many cellphone related visual features for my taste.

I hope it helps.

So the version in the Original posted worked but the version specially for the USA did not yes?

Originally Posted by Rueben_

So the version in the Original posted worked but the version specially for the USA did not yes?

Yes.

Sent from my YP-G70

Its very fast and lot of free Ram but i just cant live with out camera.