[Q] [i9003] Bootloop after flashing

---

Hello everyone!
I had some stability issues on my Samsung GT-I9003, so I flashed it . And, as the title says it, I'm stuck in a bootloop. I've tried 3 or 4 flashings with different packages. Some where "One packages", with one unique PDA, or I tried the XXKPE with everything. And I'm lost. I never get past the first boot screen.

[EDIT]
I found a way to boot it, but the touchscreen isn't working, so I'm now stuck on the language selection page...
Is it my ROM who doesn't fit?
[/EDIT]

Thanks!

Before going to download mode try wiping everything, then flash xxkpe TWICE then wipe again. Make sure you flash it correctly. And odin shows PASS. Try flashing the latona.pit included in xxkpe.

Press thanks if it helped..

Sent from my GT-I9003 using XDA

Thanks for the answer!
Problem is it didn't work!
I got a little deeper in the problem. In order to boot to android, I need to flash the bagaria root file. It contains the normalboot image. So I assume that the boot is corrupted. I'd add that after the rooting, the android recovery boots and wipes everything, but he says that the CSC wasn't installed, because "[...]/stl11" is not there. Is it the .pit?

I'm lost, again...

Thanks a lot for your help!

Originally Posted by jonasdu91

Thanks for the answer!
Problem is it didn't work!
I got a little deeper in the problem. In order to boot to android, I need to flash the bagaria root file. It contains the normalboot image. So I assume that the boot is corrupted. I'd add that after the rooting, the android recovery boots and wipes everything, but he says that the CSC wasn't installed, because "[...]/stl11" is not there. Is it the .pit?

I'm lost, again...



Thanks a lot for your help!

so weird. Where did you download your xxkpe. Try here

http://forum.xda-developers.com/show....php?t=1004647

then follow the guide here

http://forum.xda-developers.com/show...php?p=14933114

I think you just fail a step on flashing a rom.

---------- Post added at 09:16 PM ---------- Previous post was at 09:14 PM ----------

Flashing bagaria root is done after flashing a stock rom for it to be rooted. You failed to put CSC file in odin maybe. Follow the guide above perfectly then everything will be fine.

You start the procedure on Step 3 if your done downloading XXKPE here
http://forum.xda-developers.com/show....php?t=1004647

Originally Posted by jonasdu91

Thanks for the answer!
Problem is it didn't work!
I got a little deeper in the problem. In order to boot to android, I need to flash the bagaria root file. It contains the normalboot image. So I assume that the boot is corrupted. I'd add that after the rooting, the android recovery boots and wipes everything, but he says that the CSC wasn't installed, because "[...]/stl11" is not there. Is it the .pit?

I'm lost, again...

Thanks a lot for your help!

/stl11 is the /cache partition.

look like you fail to flash pit file, or u flash "one package .tar file" with partition ticked in odin.

see below for the samsung recommend setup
flash pit file with all the firmware one short.

if you flash from Froyo to GB, i recommend to flash the bootloader update.

however, flash on you own risk.

100% Work!

---

Hi.
Flash this Chinese rom, with Odin 1.85.
latona_open_china_20101222_r01.pit---------------->PIT
I9003ZCKC1-REV08-ALL-low-CL961866------------>PDA
MODEM_I9003ZCKC1_REV_00_CL866730------->PHONE
I9003-CSC-MULTI-OZH961866------------------------->CSC
Enjoy.
100% Works for me.

For those who are struck in boot loop or Softbrick their mobile do the following things exactly as they had mentioned. I followed them and boom my phone is back to normal.


For bringing your phone back to download mode (Recovering from Softbrick)
http://forum.xda-developers.com/show....php?t=1411768

After entering into download mode (reinstall Ginger bread )
http://forum.xda-developers.com/show....php?t=1133787
Note: This step deletes your user data, so be sure what you are doing

Definitely your phone should be back to normal if you follow these steps exactly.....
Million Thanks to all those who helped me in bringing back my mobile to normal function....

Hi, I am facing the same issue with a GT-I9003 as jonasdu91. I tried all the solutions mentioned above, tried all sort of firmwares. The only time the phone responded was when I flashed the bagaria file. That too ended up with a non-responsive touchscreen at the language selection screen.

Could anyone suggest what more could I do to get the phone to upgrade?