I can't boot into recovery holing on vol down + power on

if that method didnt work what can I do?

Thanks for you fast answer.

Originally Posted by etsero17

I can't boot into recovery holing on vol down + power on

if that method didnt work what can I do?

Thanks for you fast answer.

You're gonna have to reflash CWM via ADB it sounds like then to get recovery back...

How I can do that? I tryied but my computer cant detect my phone

push psneuter /data/local/psneuter
error: device not found

Thanks again

I seem to be the only one with this problem. Wifi turns on 'well', I can see the networks available and others out of range, then when I try to connect to an available one it does not connect and labels it as Not in range. Have clean flashed the rom many times but still the same problem. I have my suspicions that it is the sim card am using but can the sim affect wifi?

Originally Posted by sobhambi

I seem to be the only one with this problem. Wifi turns on 'well', I can see the networks available and others out of range, then when I try to connect to an available one it does not connect and labels it as Not in range. Have clean flashed the rom many times but still the same problem. I have my suspicions that it is the sim card am using but can the sim affect wifi?

A simple test can help you there.

Take the sim out and try it.

Hi, I love all your roms since froyo times... and every rom is surely better than the previous one!
Is it possible that within build3 battery run less than half of the time of build2 ?
I followed all the wipe instructions... Need to flash it again ?
Thanks

Originally Posted by etsero17

I can't boot into recovery holing on vol down + power on

if that method didnt work what can I do?

Thanks for you fast answer.

assuming you're doing it right, does it hang on a black screen _AFTER_ the blue logo flashes?

If so, then you have a corrupted /cache partition and recovery doesn't use fsck prior to attempting to mount. Assuming you have the stock kernel booting into regular mode should run fsck on it...but it may not be able to repair the damage it has...

You'll have to follow directions for completely restoring the partition table. You could set it up to mount as UMS and run e2fsck from a linux box but I get the feeling you aren't running linux and have experience doing that. Easier to just wipe it out and start over fresh.

I have a small question..
If I wanted to use these UI Enhancements should I get the 4.0.3 CM9 based version, or will the AOSP 4.0.4 version will also work with that?

Edit.. Nevermind, I got my answer after some more research. It won't work with AOSP.

Originally Posted by Aman1238

I have a small question..
If I wanted to use these UI Enhancements should I get the 4.0.3 CM9 based version, or will the AOSP 4.0.4 version will also work with that?

Edit.. Nevermind, I got my answer after some more research. It won't work with AOSP.

More research and you would've found our people are using it on this rom, haha. Flash at your own risk though of course. I'm curious as to why this works even though it isn't suppose to.

Sent from my LG-P999 using xda premium

Originally Posted by mt3g

More research and you would've found our people are using it on this rom, haha. Flash at your own risk though of course. I'm curious as to why this works even though it isn't suppose to.

Sent from my LG-P999 using xda premium

lol

Doniqcc explained a few pages back. It CAN work, but the issue is that it changes the System and a few other apk files to being Cyanogen based and not AOSP based. This might affect with future releases so that's why he doesn't recommend it. However like you mentioned, quite a few of u are using it already without any issues