Originally Posted by jman0

Except the "'logo_LTN_B.jpg draw failed" issue, all the other things you mention are just values stored inside the build.prop file, which is plain ASCII file used to configure some parts of Android, but which also contains all the info shown on the about section in the settings. So the GT-S6102B or GT-S6102, or the ROM version (TechnoDuos 1.0 or 1.1) are not read for the device hardware, but from that file.

The TechnoDuos version number not changing after the update is a known bug, due to the fact that build.prop is not updated when you change to 1.1, but you have the correct version if you applied the1.1 update and it worked.

The Link2SD not working problem is also known, and in this same thread, a few posts above yours, the solution was given. It implies deleting some scripts related to a2sd script, which conflicts with Link2SD. I have 1.1 with the new kernel and Link2SD working perfectly, but I had to remove those scripts.

I still can not fix the problem link2sd, even removing the a2sd. However this weekend I'll try again.
The error "logo_LTN_B.jpg draw failed" on startup, I think that is due to the fact that my unit was the model s6102b and its logo was also the same model. Anyone have any ideas so I can fix this little error?

Originally Posted by kuldeephack

@millan.
i discovered a major bug ...i was using my phone n suddlenly it crashed....it when it rebooted it stucks on galaxxy y duos logo and strted boot loop when i tried to put out and put back the battery within seconds it automatically starts booting and agin boot loop......so i thought i will flsh the rom again.after studying.then placed the battery out for 5 min...then agin i put the battery back n it didnt booted automatically...then i pressed the power button n guess wat everthing was fine again its workin fine now....i dont wat just happed before but its perfectly fine i guess....

---------- Post added at 09:15 PM ---------- Previous post was at 09:07 PM ----------

@jman
okay brother i got it..

I think that isn't a bug... may be there's a conflicting script in your init.d dir..

Originally Posted by DOMRuan

hello all,

Sorry, my english is very bad.

I'm install the TD1.0, in initialize first not work well, the keybord and play store not function, after restart device and reset to defaults configs this rom runnig ok, fast well, this a new device.. GOOD JOB!

I'm not found how-to install TD1.1, where is he?

TD1.1 is in 3rd post & its installation instructions are same as TD1.0...
* Data/cache wipe not required

Originally Posted by oreiaaaa

I still can not fix the problem link2sd, even removing the a2sd. However this weekend I'll try again.
The error "logo_LTN_B.jpg draw failed" on startup, I think that is due to the fact that my unit was the model s6102b and its logo was also the same model. Anyone have any ideas so I can fix this little error?

Make one jpg image (240 x 320) of size under 11KB
rename it to "logo_LTN_B.jpg"
use root explorer & paste it in /mnt/.lfs/

Link2sd : refer to this post http://forum.xda-developers.com/show...&postcount=111

TD1.1 is in 3rd post & its installation instructions are same as TD1.0...
* Data/cache wipe not required



ok, i'm surprise and not flash TD1.1 because the file ( TD1.1 ) has only 8mb, this correct?

review

i'm open cwm, install TD1.1 and install same kernel and boot.img?

thanks for replay bro. Shall i use same kernel flasher to flash stock kernel.

Sent from my GT-S6102 using Tapatalk 2

TD V.1.1 from TD V.1.0 for S6102

---

Thanks For your Kindes to Share Custom ROM Techno Duos V1.0 and V1.1
now i'm Using Your TD V.1.1 with Kernel same as in TD V.1.0

Its Work As Well stil no Bugs till now and also Improve Performances...

But Its cannot install Link2SD
so I Instal a2sd and also Move2SD enabler
work well but my Swapp Partition is still cannot detected by a2sd
Can U Help me...

Also I Love Boot animation from TD V.1.0
how can I Have it...?

Thanks Before
May God Bless U

Originally Posted by dr.manoj_n

thanks for replay bro. Shall i use same kernel flasher to flash stock kernel.

Sent from my GT-S6102 using Tapatalk 2

You should be able to use the same flasher, since the file is called the same (boot.img)

Thanks to this

---

oh btw,


does the edges really eat the bottom parts of the two buttons?


oh so yeah, I'm a noob. How can I thank the OP? where is the button? LOL
Having trouble finding it =))))

Btw I really want to attach pictures in this post but this site wont let me so... I will post it after 8 post counts

EDIT

FOUND IT =)))

@millan
so wat do u say it can happen again ?
shuld i need to do smthing?

Minor Bug Report (Call waiting function not working)

---

I noticed a minor bug but it creates lots of problems.. the bug is beeing discussed as under:-
I've turned my call waiting option on in my both sims... but the problem is that when somebody calls me and i am busy on another call, the caller hears waiting tone and hears the message "the number you are trying to call is busy on another call, please hold the line" but my phone doesn't beep and it doesnt show any call on wait...
This is an annoying problem as i dont know that another person is calling me and i keep on talking to the connected number..

Hello all,
I'm happy, works TD 1.1 just well
This TD 1.5 for Y DUOS S6102? Is a rom beta stage?