There is an apps in marked called usbaudio tester if help....

Inviato dal mio GT-N7000 con Tapatalk 2

Originally Posted by krypton_the_slayer

no difference with more verbosity

Sent from my GT-N7000 using XDA

in your signature says that you have Ubuntu, can you try this USB adapter in your linux box and give me the output ?

I'm rebuilding another kernel to test.

PS: I'm on IRC.

Originally Posted by mdrjr

in your signature says that you have Ubuntu, can you try this USB adapter in your linux box and give me the output ?

I'm rebuilding another kernel to test.

PS: I'm on IRC.

can you be more specific?

Ubuntu lsusb gives

Bus 001 Device 007: ID 0d8c:000e C-Media Electronics, Inc. Audio Adapter (Planet UP-100, Genius G-Talk)

Ubuntu:~$ aplay -l gives (the same as on your android kernel)

card 2: Device [Generic USB Audio Device], device 0: USB Audio [USB Audio]
Subdevices: 1/1
Subdevice #0: subdevice #0

Ubuntu:~$ aplay -L gives

sysdefault:CARD=Device
Generic USB Audio Device, USB Audio
Default Audio Device
front:CARD=Device,DEV=0
Generic USB Audio Device, USB Audio
Front speakers
surround40:CARD=Device,DEV=0
Generic USB Audio Device, USB Audio
4.0 Surround output to Front and Rear speakers
surround41:CARD=Device,DEV=0
Generic USB Audio Device, USB Audio
4.1 Surround output to Front, Rear and Subwoofer speakers
surround50:CARD=Device,DEV=0
Generic USB Audio Device, USB Audio
5.0 Surround output to Front, Center and Rear speakers
surround51:CARD=Device,DEV=0
Generic USB Audio Device, USB Audio
5.1 Surround output to Front, Center, Rear and Subwoofer speakers
surround71:CARD=Device,DEV=0
Generic USB Audio Device, USB Audio
7.1 Surround output to Front, Center, Side, Rear and Woofer speakers
iec958:CARD=Device,DEV=0
Generic USB Audio Device, USB Audio
IEC958 (S/PDIF) Digital Audio Output
dmix:CARD=Device,DEV=0
Generic USB Audio Device, USB Audio
Direct sample mixing device
dsnoop:CARD=Device,DEV=0
Generic USB Audio Device, USB Audio
Direct sample snooping device
hw:CARD=Device,DEV=0
Generic USB Audio Device, USB Audio
Direct hardware device without any conversions
plughw:CARD=Device,DEV=0
Generic USB Audio Device, USB Audio
Hardware device with all software conversion

Android:~$ alsa_aplay -L

gives

null
Discard all samples (playback) or generate zero samples (capture)
default:CARD=Device
Generic USB Audio Device, USB Audio
Default Audio Device

I removed the Galaxy Note on board yamaha devices from the above for clarity.

Later today I'll post another kernel.

AND I'll try to buy one of those DAC's no garantees.

EDIT:
New kernel, V4. Check the new modules place.
Same stuff as v3 but with extra modules.

Originally Posted by mdrjr

Later today I'll post another kernel.

AND I'll try to buy one of those DAC's no garantees.

EDIT:
New kernel, V4. Check the new modules place.
Same stuff as v3 but with extra modules.

Interesting job, I just flashed v5 so far everything ssems great I have more free memory than ever running smooth will feedback tomorrow for battery life since based on Speedmod hope it has some life if not better

Sent from my GT-N7000 using Tapatalk 2

Anyone has able to connect any type of external dac with this kernel???

Inviato dal mio GT-N7000 con Tapatalk 2

I'm trying to read up on loading modules so I can give this kernel a try. Can anyone post a n00b friendly guide to getting started? There are a lot of people out there dying to get USB audio functionality on their phones who could serve as testers. I'd certainly love to try connecting to my two USB DACs.

Can you run initscripts on this kernel? Original speedmod doesn't have it enabled. Anyone can confirm if the module cifs.ko exists in this kernel?

Originally Posted by blindbox

Can you run initscripts on this kernel? Original speedmod doesn't have it enabled. Anyone can confirm if the module cifs.ko exists in this kernel?

Just like Samsung stock kernel it does not have cifs module, CIFS support is built in kernel. You don't have to load a module to get it working. It should work Out-of-the-Box.

V6 is comming, huge changes.

Originally Posted by mdrjr

Just like Samsung stock kernel it does not have cifs module, CIFS support is built in kernel. You don't have to load a module to get it working. It should work Out-of-the-Box.

V6 is comming, huge changes.

Cifs definitely does work. I use it often.
Not done much with ALSA configs, been busy with a wedding (and recovering) and Wimbledon

Soon flashing Criskelo V8 and a bigger/better alsa build if I can find one!

I will try and post instructions later for installing the required modules. Probably a script too. It's not so hard.
Make sure you have a terminal program though.

Will wait for v6 though I think.