Originally Posted by haardman

I seem to remember unticking (and maybe reticking) the "Enable advanced network functionality" on the "USB to PC" applet on "System" tab of Settings.

Can't remember if that's what fixed it.

Thanks, this worked for me too, unchecked enable advanced network functionality... who woulda thought something advanced would be bad...

problems to Sync with Vista

---

Hi I followed the instructions but my htc didn't sync, it happens noting, no error, nothing, This happens after apdate my room with Golden Globe Manila2D - 21198/build 21198 Fast and Stable., it works great but sync is dead

Originally Posted by osber2003

Hi I followed the instructions but my htc didn't sync, it happens noting, no error, nothing, This happens after apdate my room with Golden Globe Manila2D - 21198/build 21198 Fast and Stable., it works great but sync is dead

Wrong forum mate
I understand that you do not own an HTC Universal (Universal not means all HTC devices!, it´s a model. One of the best by the way)

Sync Problem

---

1 Remove the Enable advanced network functionalty check from the USB to
PC connection settings "Start > Settings > Connections > USB to PC".
2 Make sure that the Mobile Device is connected via USB to the PC.
3 Install Windows Mobile Device Center 6.1 (either 32bit or 64bit, I installed
64bit)
4 Open Control Panel on the PC and run Windows Mobile Device Center 6.1
5 At the bottom of the application you will see Mobile Device Settings, and
within that you will see Connection Settings. Open the Connection Settings
6 Make sure that the second check box named Allow connections to one of
the following is checked, and that the Drop Down below is changed to COM
1 (or which ever COM Port your Mobile Device is connected to via your USB
cable) and save the changes
7 Disconnect the Mobile Device and Reconnect and hopefully it will work for
you.

I already done all the instruction, disable the firewall and antivirus, i also go to device manager too to update the driver/device, but still couldn't connect. Anyone can help me please.

using prophet wm5 upgrade wm6
vista home basic machine
f

Originally Posted by haardman

I had a similar problem, I reverted to 6.0.6783. Although come to think of it I think this was particular to an app I use, that refused to sync using the later version of WMDC.

Might be worth a try though.

Has anyone applied SP1 yet? What version of WMDC do you end up with?

Hi yes i've applied SP1 and my current WMDC is version 6.1.6965 working without any problem......

Cheers
Rajiv

Sync with vista solved!!

---

Already solved my problem. Stupid me .

Originally Posted by popshah

Already solved my problem. Stupid me .

Ohh Great news.... well enjoy than....

Originally Posted by popshah

Already solved my problem. Stupid me .

How did you resolved the issue???? I have an Iolite which does not synch (connects only as a guest), keep getting the message "there is a problem with your connection........"
any help will be appreciated

Even this is a legacy thread there are some people out there (including me) still using Windows Mobile devices (but also using WP7 ...).

Had exactly the same problem and in my case just using another USB cable did it! It seems that WM devices are a bit "fragile" when using a not 100% perfect USB cable