Quote:
Originally Posted by znial
does this firmware update block an interop unlocked phone?
my omnia is updated to tango 8773.98 and interop and roottools still work (i used the cab sending metod and a guide how to prevent relock on wph homepage, refeerred on the cab, oem thread here on xda) but what happen if i update through zune?
my stats after tango update
os 1.10.8773.98
revision firmware 2424.11.8.5
software radio 3.15.0.4
hardware radio 0.0.0.800
bootloader 5.8.1.9
|
The firmware doesnt as such block interop, its the problem that later Samsung firmwares blocked provisioning via the windowbreak method (if you'd already done it before upgrading f/w you will probably be ok). Anything later than a KK2 f/w is not good apparently. Looking at your stats your prob less than a KK2? (check in *#1234#)
My versions as follows, with an XXLB2 rom
f/w: 2424.12.2.2
radio: 2424.11.9.1
boot: 6.2.2.9
How is your phone unlocked? I was Chevron/interop unlocked before upgrading to Tango but updated via Zune and had to revert back and then upgrade as per the cab sending/no internet way . I've also used Jaxbot preventrelco xap to remove the phonehome url.
I'll probably give it a go and try this f/w as I like to have the latest version of everything but if you're happy enough with your phone as is I would probably leave it.
|