Originally Posted by agibby5

I tried to get the kernel code with his battery changes but keep getting an error with default.xml. I got the same with detule's branch as well. Maybe I'm doing something wrong?

repo init -u git://gitorious.org/~acl/linux-on-qualcomm-s-msm/linux-msm-rhod-nand.git -b htc-msm-2.6.27
fatal: manifest 'default.xml' not available
fatal: manifest default.xml not found

Use git clone instead of repo init

 git clone git://gitorious.org/~acl/linux-on-qualcomm-s-msm/linux-msm-rhod-nand.git -b htc-msm-2.6.27

Hopefully this Rom gets to developed farther by someone who has the time (or the perfect battery code from ACL ported to other kernels).

Thanks for your very good work ACL!

Currently this is the only rom here giving me good battery life on my RHOD100 DE.
Only thing which is not working 100% is the camera (50/50 chance to just reboot when opening a camera app).
Also it is kinda sad that this rom only has "enUS" language file. Not that i can not understand it but some things like how numbers are parsed are very different and confusing at first.

Originally Posted by nosedive

ok here is what i made a couple of weeks ago.. my update zip with german keyboard layout, cwm flashable
don't remember where i got the layout files from neither the update template..
simply flash right after ROM
cu, n

This keyboard layout still gave me a few wrong special chars (alt + o always creates an capital Ö etc). I fixed those Problems and want to share the fixed version with you. Just flash via cwm like the version from nosedive.

so trying this rim out on my old tp2 on us cellular. can it be switched to verizon?.... by somehow putting another esn of a verizon phone on it and then programming?

Sent from my Motorola Electrify using xda app-developers app

Originally Posted by moparfreak426

so trying this rim out on my old tp2 on us cellular. can it be switched to verizon?.... by somehow putting another esn of a verizon phone on it and then programming?

Sent from my Motorola Electrify using xda app-developers app

It is possible to change ESNs but it is not allowed to talked about on these forums due to the possible illegal nature of it. *shrug*
Changing carriers is sometimes possible, but difficult at best. Assuming the carrier will allow a esn/sim not in their system you will have to change out the radio/rom software to match whom ever you are trying to move to. You will have an easier time of it if you do this under WM first. Once you have WM working then come back and get an android rom.

Disregard this post, got it working.

EDIT: its letting me enter commands now after some messing around with it, except when i enter:Fastboot flash recovery recovery.img it says ERROR: cannot load recovery.img

Edit2: I think my problem is... well, in the video at 10:33-10:45 he says "fastboot folder" and I do not have or even if i did, where to even put a "fastboot folder". Will continue trying to make it work.
Stuck on miniPoopLoader. Looked through the first 30 and last 10 pages of posts and found nothing that can help.
followed instructions on this video: http://www.youtube.com/watch?v=_qNCHqGPofI
to about 9:58. Then had problems, the problem being, whenever I enter a command into the command window, it says for example...

C:Users/name>Fastboot erase recovery
< waiting for device >

On the phone it says...
"Welcome to miniPoopLoader
ACPU CLOCK: switching VDD from 0 -> 7
-lots of numbers and letters-
Flash_read_ success success success. Until it says
ERROR: Invalide boot image header
ERROR: could not do normal boot, reverting to fastboot mode.
fastboot_init()
udc_start()
-suspend-
-reset-
-portchange-
-reset-
-portchange-


So i'm not sure what to do, other than get another "boot image header". But i cant do that because the phone is stuck on an endless cycle of miniPoopLoader whenever i turn it off and back on. Help? Advice? Am I screwed? Or is it a simple fix?

Originally Posted by A cool username

Disregard this post, got it working.

EDIT: its letting me enter commands now after some messing around with it, except when i enter:Fastboot flash recovery recovery.img it says ERROR: cannot load recovery.img

Edit2: I think my problem is... well, in the video at 10:33-10:45 he says "fastboot folder" and I do not have or even if i did, where to even put a "fastboot folder". Will continue trying to make it work.
Stuck on miniPoopLoader. Looked through the first 30 and last 10 pages of posts and found nothing that can help.
followed instructions on this video: http://www.youtube.com/watch?v=_qNCHqGPofI
to about 9:58. Then had problems, the problem being, whenever I enter a command into the command window, it says for example...

C:Users/name>Fastboot erase recovery
< waiting for device >

On the phone it says...
"Welcome to miniPoopLoader
ACPU CLOCK: switching VDD from 0 -> 7
-lots of numbers and letters-
Flash_read_ success success success. Until it says
ERROR: Invalide boot image header
ERROR: could not do normal boot, reverting to fastboot mode.
fastboot_init()
udc_start()
-suspend-
-reset-
-portchange-
-reset-
-portchange-


So i'm not sure what to do, other than get another "boot image header". But i cant do that because the phone is stuck on an endless cycle of miniPoopLoader whenever i turn it off and back on. Help? Advice? Am I screwed? Or is it a simple fix?

first things first...
NAND How-To

Prerequisites
1.Make sure you have a charged battery (at least 70% in WinMo)!!!
2.Must already have ADB working (Make sure you have all the drivers installed).
3.Must have Fastboot working (related to ADB...)
4.Be able to accurately report issues!!!
5.Must have some knowledge on how to flash images!!! (using recovery)

do you have adb working? if so do you know how to use command line?

Edit: sorry didnt read whole post glad you got it workin.

I'm on Sprint and am having trouble getting the APN settings to "stick". Anyone else?

Originally Posted by agibby5

I'm on Sprint and am having trouble getting the APN settings to "stick". Anyone else?

Are you using the proper settings?

If you don't use the appropriate MMS settings, they won't 'stick'.



A cool username - did you sort out your issue? Your post is very confusing.

moparfreak426 - as was previously stated, flashing this ROM has basically nothing to do with the carrier provided on the device. Sort that out, then flash this ROM.

Originally Posted by arrrghhh

Are you using the proper settings?

If you don't use the appropriate MMS settings, they won't 'stick'.

I was using the settings from here, but they won't save.
http://forum.xda-developers.com/show...&postcount=715