Originally Posted by julian.kueh

This Rom has given my GTab a new lease on life. Great work. Thanks so much.

Sent from my GT-P1000 using xda app-developers app

No problem,

Just a quick update i have managed to fix the built in voltage control in Gummy
and AOKP. i have also added a few extra features and fixes to the kernel.

Originally Posted by julian.kueh

I had that problem on initial install. While it was rebooting I pressed and held the power button. Probably for as long as 15-20 seconds. The Tab eventually switched off. I then pressed vol up+power until the Tab went into Recovery. Selected to install again and it went fine.

Edit: don't the kernel and rom install automatically?
Sent from my GT-P1000 using xda app-developers app

thank you for the tip and yes i do but i ment the overcome kernel you flash before installing to convert your partitions to ext4

Originally Posted by henryedwardrose

No problem,

Just a quick update i have managed to fix the built in voltage control in Gummy
and AOKP. i have also added a few extra features and fixes to the kernel.



thank you for the tip and yes i do but i ment the overcome kernel you flash before installing to convert your partitions to ext4

Hi,
If your rom is like Stimpz0r's or cm9,
There is no need to wait for the ext4 to complete.
We only need the cwm.
So after flashing overcome kernel, force it down.
Then boot to recovery and flash zips.
I restock and did that way all the time.

Sent from my GT-P1000 using xda app-developers app

Originally Posted by priyana

Hi,
If your rom is like Stimpz0r's or cm9,
There is no need to wait for the ext4 to complete.
We only need the cwm.
So after flashing overcome kernel, force it down.
Then boot to recovery and flash zips.
I restock and did that way all the time.

Sent from my GT-P1000 using xda app-developers app

My mistake! well thank you for correcting me

cant wait to see this for cdma sgt7

On its rom is possible remove the softkey to the monitor? Thanks guys

Inviato dal mio GT-P1000 con Tapatalk 2

Originally Posted by jarjar124

cant wait to see this for cdma sgt7

I will build a CDMA version of Gummy and AOKP when a next version is release shouldn't be long

Originally Posted by cranio84

On its rom is possible remove the softkey to the monitor? Thanks guys

Inviato dal mio GT-P1000 con Tapatalk 2

by the monitor do you mean when you output your screen to a tv or something? if so in AOKP in rom control their is a setting that allows you enable a "hide nav bar" or something like that in the power menu. In Gummy i think it is their by default if not its somewhere in the settings.

need help and advice

---

i have installed aokp built 40 and then gummy 1.3.0, i have problem with phone application. when i make call or receive a call i get error ui. my other problem when i still use overcome 4.1.0 i can play game full display, but in this room not like.

i'm sorry i still have one problem, my data on sd card can't read in this room
any one can give any solution
thanks before,

Originally Posted by henryedwardrose

I will build a CDMA version of Gummy and AOKP when a next version is release shouldn't be long

Originally Posted by jarjar124

cant wait to see this for cdma sgt7

running aokp just fine on my sprint tab, followed the links and used the p1c(verizon) rom.

formatted system, data, cache etc...
rom loaded perfect, only weird thing is i still have the CM9 boot logo.

CM9 logo comes up then goes into AKOP boot animation then loads rom.
was i supposed to wipe boot ?

feature im missing/cant find: hold back button to kill app

edit: did a search and saw ppl using the phone app ?
which phone app and which tab are you guys using?
i dont see any phone app and currently making calls through google voice/groove ip over 3g.

confused

---

Hello all. I am confused on how to install the gummy 1.3.0.

should i install first the AOKP build #40 then Gummy 1.3.0 ?

or I can install Gummy 1.3.0 on top of AOKP build 38 rebuild 1?

I am on AOKP build 38 rebuild 1 right now.

thanks.

Originally Posted by rusydipct

i have installed aokp built 40 and then gummy 1.3.0, i have problem with phone application. when i make call or receive a call i get error ui. my other problem when i still use overcome 4.1.0 i can play game full display, but in this room not like.

i'm sorry i still have one problem, my data on sd card can't read in this room
any one can give any solution
thanks before,

I don't know why you are having this problem, i will test it tonight when i get in and if it doesn't work i will try and fix it

Originally Posted by iorecki

running aokp just fine on my sprint tab, followed the links and used the p1c(verizon) rom.

formatted system, data, cache etc...
rom loaded perfect, only weird thing is i still have the CM9 boot logo.

CM9 logo comes up then goes into AKOP boot animation then loads rom.
was i supposed to wipe boot ?

feature im missing/cant find: hold back button to kill app

edit: did a search and saw ppl using the phone app ?
which phone app and which tab are you guys using?
i dont see any phone app and currently making calls through google voice/groove ip over 3g.

the kill app thing should be in developer options at the bottom?
the CM9 spash screen is from the kernel you have installed.
there is a phone application installed with both of these roms.

Originally Posted by cwiggler

Hello all. I am confused on how to install the gummy 1.3.0.

should i install first the AOKP build #40 then Gummy 1.3.0 ?

or I can install Gummy 1.3.0 on top of AOKP build 38 rebuild 1?

I am on AOKP build 38 rebuild 1 right now.

thanks.

Gummy is not any different to any other rom. read the OP and you will see the instructions.