Originally Posted by h00py
So you tried this?
-Relock the bootloader
-Extract the ruu
-Add eng hboot into the ruu and rezip it
-fastboot oem rebootRUU
-fastboot flash zip rom.zip
Trying again nw, However i have just opened the Hboot file in textpad lol, and found this:
"###[ fastboot main ]###
# Please detach the device #
s_KeyButton_VOL_UP_Pin handle could not be acquired s_KeyButton_VOL_DOWN_Pin handle could not be acquired s_KeyButton_PWR_Pin handle could not be acquired Start BootAndroid(0x%x)
KernelImage: 0x%x, ImageSize: %d, RamBase: 0x%x
Magic value mismatch: %c%c%c%c%c%c%c%c
Failed to setup warmboot args %x
Failed to set shmoo boot argument
Critical failure: Unable to start TF.
USB IS PLUG FASTBOOT USB USB IS UNPLUG %s NvOsMemcmp download: len = %d ,bufsize = %d , BytesRcvd = %d
DownloadCmdreceived = true
flash: zip diag image loaded: size=%d bytes, checksum=%u pg1fs_ pg2fs_ get file size = %d
FAILimage update error zimage flash zimage done.
Flashing StorMgr partition %s
Flashing MBR to device
erase: StorMgr Formatting %s
FAIL(%08x) Failed to process command %s error(0x%x)
%s Nv3pTransportReceiveTimeOut Booting recovery kernel image
Unrecoverable bootloader error (0x%08x).
Load OS now via JTAG backdoor....
Platform Pre Boot configuration...
Partition table Size =%d
Entering NvFlash recovery mode / Nv3p Server
EB2 Use scroll wheel or keyboard for movement and selection
Neither Scroll Wheel nor Keyboard are detected ...Booting OS
Checking for RCK.. press <Enter> in 5 sec to enter RCK
Press <Enter> to select, Arrow key (Left, Right) for selection move
Key driver not found.. Booting OS
Checking for RCK.. press key <Menu> in 5 sec to enter RCK
Press <Menu> to select, Home(Left) and Back(Right) for selection move
Checking for RCK.. press any key in 5 sec to enter RCK
Press scroll wheel to select, Scroll for selection move
Scroll wheel not found.. Booting OS
Press <Wake> to select, Home(Left) and Back(Right) for selection move
Press <POWER> to select item, <VOL UP> to previous item
and <VOL DOWN> to next item
Atag usage: %u bytes
[WARNING] Atag: size of atag is too large, system might hanging
add Partitions Tag.... Done....
add wifi_eeprom, 1024..... done
setting_wifi_eeprom is NULL, don't set ATAG_WIFI [ATAG] IMEI = %s [ATAG] pcb_id = 0x%x
[ATAG] engernee_id = 0x%x
serial_low = %x
serial_high = %x"
Now its the first 2-3 lines im interesting when booting it looks as if the phone is looking for a key combo, just a shot in the dark, i am not a software geek or hardware just browsing, it mentions apx mode and key combo v+,v- and power button . . . .
Samsung Galaxy GT-I9300
Pardus HD RoM S4 Edition Volume II