[Nand ROM] Android iceBread blackstone
I found this Android Rom Nand not tested now i´m with htc one X ...
hope this works
This is just for Future Development
its or own risk .... can damage or device if not done correctly
Now developers can start Nand Blackstone Roms
Welcome to Blackstone NAND Progress
IceBread on NAND
- ACL : Boot and Recovery base, ril
- XDAndroid team : Build base & Lot of stuff
- Herrickwong: Kernel
- Arganis31: Nbh for Blackstone
- Tiad8: some help for Blackstone Nand first progress
First of all, I would like thank all great guys who is helped for our device nand fighting! Of course BIG thank to ACL.
I would like too calling all devs who are want help for HTC Blackstone Nand progress that we have faster without any fight. I think this phone its really old that we fighting for few issue but i think its really possible the real and good nand. I adding credits if i know who is create fix for nand.
I dont know everythings like kernel example but i fixing currently.
Im glad if everyone can help!
Thank you very much
This is my first our Blackstone Nand version. I take lot of time that we have more user friendly and funkcionality NAND build.
Pls keep your attention that this is Test build and need lot of work. Im working on it the kernel too but its slow because its not easy.
Main Install procedure:
* you need reading NAND tutorial that you understand correct / clear what you are doing!!!
0 - Flash latest HardSPL from OliNex
1 - Create one folder in pc and copy here : adb files & fastboot.exe, recovery may be boot.img from build.zip
2 - Install pdanet usb driver
3 - Format your sdcard to fat32 and after copy here: blac.nbh & build.zip
4 - Boot to tricolor screen and you need task 29 ( erase wm ) from BlackstoneRUUAdvanced
5 - Reboot again the tricolor mode and flash nbh from sdcard
6 - After done, reboot again and you look the fastboot screen ( Blue )
7 - Plug usb and run terminal from pc go to your folder ( adb fastboot etc ) and write this :
fastboot flash recovery recovery.img after this ok write this :
fastboot boot recovery.img
8 - your recovery running now, install this build if done after make reset or battery pull out.
9 - turn on your phone and wait for booted Android.
Another Install guide with more info, maybe its better for you:
Thanks to FazZ! Great work!
Flash the latest HardSPL from OliNex
Extract the 'adb files & fastboot.exe' files to a folder
Format the microSD card fully as FAT32
Copy the 'BlacIMG.NBH' file and your selected ROM (zip) you wish to use to the root of the microSD
Boot in TriColour mode (Power button and Volume down button)
Whilst in the TriColour mode, connect the Blackstone to a USB port ('Serial' should now say 'USB')
Run 'BlackstoneRUUAdvanced' and select the 'Task 29' which is full wipe of the Blackstone
Once completed, insert the microSD card and reboot into the TriColour mode again
The Blackstone will auto-flash-install (after key confirmation) the 'BlacIMG.NBH' on the microSD card
The 'BlacIMG.NBH' must NOT be flashed via Windows using the RUU tool (it will only fail)
Once flashed with the 'BlacIMG.NBH' it will reboot to a new Fastboot screen (blue background)
After a short time the Blackstone in Fastboot mode with enter a USB connect ready state
Now connect the Blackstone to your Windows OS and open a CLi/Command prompt
Within CLi go to the directory where you place the 'adb files & fastboot.exe' files (from step 2)
Type: fastboot flash recovery recovery.img (this will flash install the custom CWR)
Then type: fastboot boot recovery.img (this will reboot your Blackstone into CWR)
In CWR use the Volume keys to move up and down, and the Power button to select
Scroll through list to enable the 'Back key' option (touch screen and capacitive buttons do not work yet)
You are now finally ready to install your chosen ROM that is on your microSD
Once installed, let it reboot into Android OS which takes about 5 minutes on the first run
Once the Blackstone has settled within the OS (you can see the typical Android home screen), reboot
This time round, it should only take about a minute to start and you can now start using you NAND ROM
AUDIO - You need one trick, if you have booted rom after plug headset and play music from musicplayer, after unplug and continue play and after you unlock system audio
* If recovery flash done after every reboot like this step:
- Power key pressing in fastboot screen : booting to recovery.
- If not pressing power key after simply booting android.
- If plugged Ac / Pc Usb power after you have fastboot mode.
Big Thanks to all my donators: (included SD/NAND too )
Phone ( in / out )
Sms ( in / out )
App install and run
Root with Superuser
All stock app
Camera! - video not tested so far ( for photo my best app camera360 ultimate )
Games - Buggy so far
Not working :
3G-2G data connection
/ You look the best speed and ram ( deodexed = 128 Mb odexed ~ 140MB with clear boot ) on blackstone if im done my kernel. better speed & ram than all sd build. Patience! /
Blackstone NAND progress Downloads place + all neccessary files!
- System libs are updated for better speed stability.
- Better boot.img configuration
- Data connection progress, hope its done in this weekend but i dont guarantee!! its very close.
- New boot.img
Added to 3D fix, and sensor fix and other small change
- Right Sensor neccessary files for Blackstone GB nand.
Ready just boot.img-2012.04.15 if you need only this.