[HOW-TO] Change your Boot Splash + ZIPs + Online Generator + Warning Gone + Ville/C2

touch of jobo · Jul 16, 2012

You can have your own custom boot splash. (This is the very first picture you see when you boot up the device. Before the boot animation. The one you also see when booting into recovery.)

Upload a picture here. (It should be 540x960 pixels. If it's not, it gets resized without preserving proportions.) It generates a .zip that you can flash in recovery.
Or pick one from the list at the bottom of this post.

You must be on hboot 1.06 or 1.09 for this to work. If you're not, here is how to downgrade your hboot.
If you're S-Off, this will work on any hboot version. If you're not, here is how to get S-Off.

Flashing a new boot splash does not get rid of the red "This build is for development only.." warning text. (Edit: Now that we have S-Off, you can edit out the warning text in the hboot image. I tried it. It works. But it's a dangerous thing to do if you don't do everything exactly correct.)

If you create one that you feel is especially nice, feel free to post it in this thread. ("Pics and zips please.")

/!\ So far there are (at least) 2 reports where the flashable zip did not work, but manually dd'ing the raw 565 file into mmcblk0p14 did work. If someone can point out what the update script in the zip does not do that is required to successfully flash the splash, I'd be very interested.

You can also get rid of the red warning text overlay. (If you're S-Off)

I modified a couple of hboots to edit out the warning text, and made flashable zips for them. See post #148. <-- You must be S-Off for this. If you're not you can get bricked.
(A side effect of flashing the 1.14.0004 hboot is that your ** TAMPERED ** flag is gone, even when flashing different ones afterwards.)

-Jobo

Original post, from before it was so easy...

If you have a 540x960px image, save/convert it to raw rgb565 (The resulting file should be 1036800 bytes.. 540x960x2) and dd it into /dev/block/mmcblk0p14.

I tested with this attached one. (That zip is not flashable. Just unzip it and dd the raw 565 file. You dont need to be in recovery, you can do it while booted.) I'm sure others can do better but this was good enough to see that it works, and I like a dark splash better than the light one.

You will still get the red 'This build is for development only' stuff overlaid tho.
That overlay text sits in mmcblk0p12:0xBD700 by the way but I dont dare poke into that partition.

Update 2012/7/19: See post #8 to make it flashable from recovery.
Update 2012/7/25: Looks like this will only for for hboot-1.06 and 1.09, not for 1.13 and up. (Unless you're S-Off)
Update 2012/9/20: Collected all boot splashes here.
Update 2012/10/1: Made a php thingy to generate flashable zips from a web form. See post #115.
Update 2013/1/2: Redid this post to point at the online zip generator.
Update 2013/2/22: Made some additions/edits regarding S-Off
Update 2013/2/23: Added some flashable edited hboots. See post #148.
Update 2013/3/16: Added fastboot-flashable zips, as it is now discouraged to flash hboot in recovery. See post #274
Update 2013/6/11: Minor php script update in the online generator because I added a version for the One-M7
Update 2013/11/22: Confirmed to work on VilleC2 as well.
Update 2014/05/31: Added support for the Desire X
Update 2014/07/15: Added support for the One M8
Update 2014/07/17: Hmmm... So it turns out that the zips for the M7 also work for the Butterfly S. I had no idea.

splash-(lcambriz)-google.zip
splash-(pagantek)-motherboard.zip
splash-(randomnoob83)-supergirl.zip
splash-(Stroid01)-napoli-flame-effect.zip
splash-(Stroid01)-napoli.zip
splash-(Stroid01)-realmadrid.zip
splash-(TramainM)-rings.zip
splash-black.zip
splash-blue.zip
splash-stock.zip
splash-tampered.zip
splash-viper.zip
splash-(Orical)-aktion.zip
splash-(ChaseMDuffin)-thc.zip
splash-ragnarokmk2.zip
splash-(essentialmindz)-OneS.zip
splash-(Sneakyghost)-venomOne.zip

BiteBlaze · Jul 17, 2012

Edit: never mind. Nice

Sent from my HTC One S using xda premium

klin1344 · Jul 17, 2012

Very nice. Thanks for finding this out. Maybe a mod should move this to the themes and apps section? I don't want it to get buried with all the other topics here in general.

Sent using Tapatalk

O_G · Jul 17, 2012

Moved to themes and apps.

Orical · Jul 18, 2012

Hell yeah!!!!! I've been waiting for someone to post this up I have been making a few since I bought this device ill post some images when I get home tonight.

Thanks for figuring this out.

Sent from my HTC VLE_U using xda premium

twiztidnutzzzzz · Jul 18, 2012

Ya same here as I went through withdraw not being able to easily change the.splash on the g2x..

Don't sound like much but when you do it the g1, then my3gs, then my4g then to them all again when the wife takes over the phone.

Sent from my HTC VLE_U using xda app-developers app

Orical · Jul 18, 2012

Does the name have to be the same or can I change it too "custom.img"

Sent from my HTC VLE_U using xda premium

touch of jobo · Jul 18, 2012

Orical said:
Does the name have to be the same..

The name doesn't matter, but the contents must be raw rgb565 data.
Just put the file on your sdcard, and then from an adb shell, dd it into mmcblk0p14.
-Jobo

Edit: Attachment is flashable in recovery. You can just replace the file in /cache/
Edit: To work around the 20 attachment limit, I use this post to 'host' flashable zips to link to from post #1.

musky · Jul 18, 2012

quick question

touch of jobo said:
The name doesn't matter, but the contents must be raw rgb565 data.
Just put the file on your sdcard, and then from an adb shell, dd it into mmcblk0p14.
-Jobo

Edit: Attachment is flashable in recovery. You can just replace the file in /cache/

Just curious, exactly what file do I replace in cache?

touch of jobo · Jul 18, 2012

musky said:
what file do I replace in cache?

Inside the zip. There is only one file inside /cache/ and thats the splash.
-Jobo

Orical · Jul 19, 2012

Ok did a flash and it worked out great, the only time you will get that HTC warning in red letters across the splash is if your not using the stock boot image, if your using a raw image it will display but other wise it looks fine (no warning displayed).

Thanks again, I'll post up some work when I'm done.

For those that have never done this before here's what you do.

First you want to back up the original image, there's nothing worse than changing something and finding out you didn't back up the original and this is no exception SO go to terminal emulator and type this line:

su

dd if=/dev/block/mmcblk0p14 of=/sdcard/mmcblk0p14.img

This will backup to the sdcard as an image so now go put that in a safe place on your computer just in case you format your sdcard down the road. Don't lose this.

Rename the image that you put on your sdcard to:

custom.img

and save it, make sure its on the root of the sdcard other wise you need to provide the path. Then load terminal emulator and type:

su

dd if=/mnt/sdcard/custom.img of=/dev/block/mmcblk0p14

The transfer in and out will be exactly the same if you typed this in correctly and its highly important that you type in the correct mmcblk number or you could be in for a long night.

I backed up everything just in case to do this type this out and take the file image and put it away.

su

dd if=/dev/block/mmcblk0 of=/sdcard/mmcblk0.img

This is a huge image but its a full image of your entire device including all partitions, this is more than a nandoid its everything.

Sent from my HTC VLE_U using xda premium

maverick_hunter · Jul 19, 2012

Could we get some requests going? I've always had a thing for this simple black splash screen.

touch of jobo · Jul 19, 2012

lcambriz said:
.. some requests .. for this simple black splash screen.

Flash this .zip in recovery.
-Jobo

Orical · Jul 20, 2012

touch of jobo said:
Flash this .zip in recovery.
-Jobo

What are you using to convert the splash.jpg to splash.img? I tried an older method but for some reason it's not working.

randomnoob83 · Jul 20, 2012

can anyone turn this into a rgb565 data.

touch of jobo · Jul 20, 2012

Orical said:
What are you using to convert the splash.jpg to splash.img?

ffmpeg will do it,

Code:

ffmpeg -i splash1.bmp -f rawvideo -pix_fmt rgb565 splash.565

or alternatively you can save it as a 16 bit .bmp and then strip the headers off or tail the last 1036800 bytes. (You'll have to flip it as (0,0) is bottom left in .bmp files.)
I bet there are nicer tools but I haven't looked.
-Jobo

Orical · Jul 20, 2012

touch of jobo said:
ffmpeg will do it,

Code:

ffmpeg -i splash1.bmp -f rawvideo -pix_fmt rgb565 splash.565

or alternatively you can save it as a 16 bit .bmp and then strip the headers off or tail the last 1036800 bytes. (You'll have to flip it as (0,0) is bottom left in .bmp files.)
I bet there are nicer tools but I haven't looked.
-Jobo

Yeah I've looked and the one released is strictly 480x800, I've never used that method you listed above but ill give it a shot everything I did before was with that tool on the mytouch 4g.

Sent from my HTC VLE_U using xda premium

ragnarokmk2 · Jul 21, 2012

Orical said:
Yeah I've looked and the one released is strictly 480x800, I've never used that method you listed above but ill give it a shot everything I did before was with that tool on the mytouch 4g.

Sent from my HTC VLE_U using xda premium

You can also use that Paint.Net program as described in this thread: http://xdaforums.com/showthread.php?t=649890
Pretty easy to do it using that method, you just have to consider the different resolution of the OneS and follow steps 1-3. I converted an image to rgb565 with it, worked like a charm.

BUT! I can't get it to flash. Tried with the flashable zip (placed it in the cache folder) and tried installing with TWRP. Comes out as successful, but I still get the default HTC quietly brilliant splash.
Also tried dd-ing the image with a terminal emulator, also no-go.

Running HTC Stock Rom, Vodafone DE/UK, 1.78, rooted.

Attached the image in a zip, if someone wants to try it. It can be opened with Paint.Net. You have to supply it with the correct resolution tho: 540x960

touch of jobo · Jul 21, 2012

ragnarokmk2 said:
I can't get it to flash. .. Attached the image in a zip, if someone wants to try it.

Works for me.

I wonder what could make the difference...
Do you have a signed boot image in place or a custom one?
Do you get the red 'This build is for development only' text overlaid?

-Jobo

Darknites · Jul 21, 2012

touch of jobo said:
Works for me.

I wonder what could make the difference...
Do you have a signed boot image in place or a custom one?
Do you get the red 'This build is for development only' text overlaid?

-Jobo

I tryed the Google one and it didnt work and same as ragnarokmk2 TWRP says successful. I'm on Miui and have the red text.

[HOW-TO] Change your Boot Splash + ZIPs + Online Generator + Warning Gone + Ville/C2

Senior Member

Attachments

Senior Member

Senior Member

Retired Senior Moderator / Retired ET Admin

Senior Member

Senior Member

Senior Member

Senior Member

Attachments

Senior Member

Senior Member

Senior Member

Senior Member

Attachments

Senior Member

Attachments

Senior Member

Senior Member

Senior Member

Attachments

Senior Member

Member

Attachments

Senior Member

Senior Member

Similar threads

Top Liked Posts