I use

24/400
28/600
38/800
64/1200

Very stable and very smooth

?

---

how come you have 4 settings?, i can only enter 3...
also, wich settings do you think would be better for CM10 to run smoothly..

Originally Posted by juanwini

how come you have 4 settings?, i can only enter 3...
also, wich settings do you think would be better for CM10 to run smoothly..

froyo kernel only have 3

only a GB kernel have 4

depends on ur phone what u can flash, my is a green lense defy, I only can only flash froyo kernel, but 3 is also good

Jelly powered.Defy

delete.

ur can try it with

300 Mhz @ 30v
600 Mhz @ 46v
1,1GHz @ 58v

with smartass gov
it runs smooth


Jelly powered.Defy

Originally Posted by vaibhav palande

For the Governers like SmartassV2, conservative, BoostedassV2 flash the attached file through CWM.. These are the DroidX governers ported for defy+ and defy.. I am using smartassV2 now.. its very much battery efficient and also good performance wise..

thanks! ill test smartassv2 and report.

Originally Posted by vaibhav palande

For the Governers like SmartassV2, conservative, BoostedassV2 flash the attached file through CWM.. These are the DroidX governers ported for defy+ and defy.. I am using smartassV2 now.. its very much battery efficient and also good performance wise..

THANKS

SmartassV2

---

been using smartassv2 for a few hours (used smartass before), and i noticed a performance boost, fewer lags, and overall feel is much snappier.
heres a screenshot of cpu spy:


at last a governor which uses all frequencies, and still goes quickly into deep sleep. i recommend it to everyone.
battery life seems to be quite the same as smartass.

Originally Posted by zakoo2

been using smartassv2 for a few hours (used smartass before), and i noticed a performance boost, fewer lags, and overall feel is much snappier.
heres a screenshot of cpu spy:


at last a governor which uses all frequencies, and still goes quickly into deep sleep. i recommend it to everyone.
battery life seems to be quite the same as smartass.

all old gov function well, with that new governors? I had few profiles, witch changes automatic govenors


Jelly powered.Defy

No more undervolting

---

Here's an interesting read guys...

[Q] You claim you cannot increase battery life using UV beyond 2%. Justify yourself!
[A] When the processor is in use (i.e. not asleep or idle) UV does save a tiny amount of power. I tested with the most extreme UV my phone could handle. With a high performance governor, e.g. smartassv2, extreme UV would reduce CPU drain by 13%, or about 7 mA. With a governor that keeps the CPU frequency low, CPU drain would be reduced by about 18%, or 4.6 mA (weighted - see the spreadsheet starting cell H88).

Remember, these savings are limited to the processor, and only when it is active. For most users, this will mean the screen is on. For comparison, the screen on minimum brightness displaying black uses 9mA. On max brightness, displaying white, it uses 690mA. Let us assume some median value, ~350 mA.

A saving of 4.6 mA out of at least 350 mA (screen) plus 20 mA (CPU)
= 1.2%

A saving of 7 mA out of at least 350 mA (screen) plus 50 mA (CPU)
= 1.8%

So, regardless of your choice of governor, even with extreme undervolting, you are not going to be able to increase your battery life by more than 2%.

I went back to stock volts after reading that.

Also regarding governor benchmarks
CPU Governors and I/O Schedulers

Power Saving Governors

Seems he put a lot of work into his testing. It's worth a read.