FORUMS

Voices Of XDA: Orbiting The Earth With Android

Editor’s note: This week’s feature has been written by forum … more

CloudPlayer: DIY HiFi Music Streaming Solution

In our Helpful Guide to Music Streaming Services, we mentioned several different services … more

Optimize Battery Life with This Useful App

Battery life is an important aspect of your smartphone, especially if you use it for more … more

The OnePlus 2 & The Year of Smartphone Compromises

We are very close to entering the last third of 2015, and we have now seen many of … more

Hellraise GT-I9100 Jellybean for SGH-I777

592 posts
Thanks Meter: 223
 
By mattern1974, Senior Member on 1st August 2012, 12:31 PM
Post Reply Subscribe to Thread Email Thread
2nd August 2012, 09:25 AM |#11  
rk249's Avatar
Senior Member
Thanks Meter: 108
 
More
Quote:
Originally Posted by binhosccx

Hello my friends, i followed all the tutorial, but when i will install the Jelllybean GT-I9100 rom zip i get this erro message:

Error in /sdcard/cm-10-20120801-EXPERIMENTAL-i9100-CODEWORKX.zip
(Status 7)
Instalation aborted.

My galaxy S2 is the i777 from AT&T and i think i did all the tutorial right!
What do you think is going on?
Thank you!

You need to go into your build.prop and chage GT-I9100 to SGH-I777 & I9100 to I777. Or extract the build.prop from the cm10 zip and replace the one in your phone with it.
 
 
2nd August 2012, 11:21 AM |#12  
mattern1974's Avatar
OP Senior Member
Flag Tremont, Pennsylvania
Thanks Meter: 223
 
More
Quote:
Originally Posted by motoman22x

Using Entropys ICS Hellraiser, I packed it with The Dream JB Kernel and a new modem. So all you have to do is flash this after you flash a i9100 ROM and it does everything for you http://db.tt/dEfrVjGB

This solution will work and is essentially the same as what I described in the OP.

My method is just a bit longer with the exception of choice in the future of newer kernels and modems that may be created.

As for the status 7 error...you need to unzip the JB ROM you have chosen and edit out any device scripts in the install that check for a GT-I9100 OR you need to edit your current ROM's build.prop to show GT-I9100 instead of SGH-I777 BEFORE you reboot into recovery to flash the JB ROM.

Some ROMs have a device script that verifies you are flashing to the "proper" device.

Sent from my smooth as butter SGH-I777.
2nd August 2012, 01:21 PM |#13  
Phalanx7621's Avatar
Senior Member
Flag Delaware
Thanks Meter: 2,056
 
More
Or he could've just googled i777 status 7 error.

Sent from my SGH-I777 using Tapatalk 2
2nd August 2012, 01:25 PM |#14  
mattern1974's Avatar
OP Senior Member
Flag Tremont, Pennsylvania
Thanks Meter: 223
 
More
Quote:
Originally Posted by Phalanx7621

Or he could've just googled i777 status 7 error.

Sent from my SGH-I777 using Tapatalk 2

Yes, you are right...but it never hurts to help someone along.

Sent from my smooth as butter SGH-I777.
The Following 3 Users Say Thank You to mattern1974 For This Useful Post: [ View ]
3rd August 2012, 05:54 AM |#15  
Senior Member
Thanks Meter: 43
 
More
I tried to flash RR_Jelly_Bean_V3.0.1_Aroma with instraction first post but all time it hanging on RR bootanimation. I tried defoult, light version , same problem.
Before flashing wiped all and format system.
After flashing tried wipe cashe and dalvic cashe, same.
Last edited by fakhri; 3rd August 2012 at 05:59 AM.
3rd August 2012, 09:39 AM |#16  
rk249's Avatar
Senior Member
Thanks Meter: 108
 
More
Quote:
Originally Posted by fakhri

I tried to flash RR_Jelly_Bean_V3.0.1_Aroma with instraction first post but all time it hanging on RR bootanimation. I tried defoult, light version , same problem.
Before flashing wiped all and format system.
After flashing tried wipe cashe and dalvic cashe, same.

Make sure you're using the right kernel. JB compatible not just an ICS kernel.
3rd August 2012, 12:30 PM |#17  
Senior Member
Thanks Meter: 43
 
More
Quote:
Originally Posted by rk249

Make sure you're using the right kernel. JB compatible not just an ICS kernel.

Kernel is Siyah 3.5.1, as mentioned in first post.
3rd August 2012, 02:11 PM |#18  
mattern1974's Avatar
OP Senior Member
Flag Tremont, Pennsylvania
Thanks Meter: 223
 
More
Quote:
Originally Posted by fakhri

Kernel is Siyah 3.5.1, as mentioned in first post.

Did you get the Siyah CM10 Test Kernel or the normal ICS 3.5.1 version? I would bet the 3.5.1 ICS version. My apologies...I should have been more specific.

As far as I can tell, the Siyah kernel generated by Ktoonsez for the SGH-I777, has separate ICS and JB versions. The GT-I9100 Siyah kernel is version 3.5.2 and seems to be for BOTH ICS and JB roms but that is only for that phone.

At this time, Ktoonsez' Siyah has mic swap and no mic swap versions for ICS 3.5.1 but the CM10 test kernel seems to be without mic swap, which would cause your call audio to be low since the top mic is being used instead of the bottom mic. Without mic swap is only for AT&T leaked roms (and we all know AT&T won't be releasing JB to us anytime soon). Please go thank or donate to Ktoonsez anyway because you know he will be on top of this in the future. http://forum.xda-developers.com/show....php?t=1592228

I would highly recommend the Dream kernel WITH mic swap. This should fix your problem. Don't forget to Thank or Donate to Team Skyfire if you use their kernel. http://forum.xda-developers.com/show....php?t=1788148

I am using the 2.6.9 version of the Dream kernel (with mic swap) with great results. For some reason, which is explained in their thread, 2.6.9 is actually newer than their 3.2.9 version. Something to do with the TWRP recovery for one and not the other.

Please let us all know your results using the proper kernel.
Last edited by mattern1974; 3rd August 2012 at 02:26 PM. Reason: clarification
The Following 2 Users Say Thank You to mattern1974 For This Useful Post: [ View ]
3rd August 2012, 07:05 PM |#19  
Senior Member
Thanks Meter: 43
 
More
Thank You very match. I flashed Dream kernel and it works fine.
Thanks for your grate jobs.
6th August 2012, 02:14 PM |#20  
dev997's Avatar
Senior Member
Flag Irvine
Thanks Meter: 75
 
More
Thumbs up Hailraising i9100 SuperNexus rom
Hi,

Can someone please help me hailraising the Supernexus rom released yesterday in i9100.
link : http://forum.xda-developers.com/show....php?t=1810042

I tried to hailraise it using the scripe you provided. When I tried to install it failed with bunch of build.prop mismatch and status 7 error. So as suggested earlier, I extracted its build.prop and edited it to match our device, but still it fails with same error. My proficieny in this area ends here and don't know what else to do here !!

I'm really interested in this build, as this is the only rom thats not based on cm10 exp build , but its made from the aosp source code directly and thus I hope it solves my media scanner issue and I could have a jb rom to work with.

Thanks !!!
6th August 2012, 02:54 PM |#21  
mattern1974's Avatar
OP Senior Member
Flag Tremont, Pennsylvania
Thanks Meter: 223
 
More
Quote:
Originally Posted by dev997

Hi,

Can someone please help me hailraising the Supernexus rom released yesterday in i9100.
link : http://forum.xda-developers.com/show....php?t=1810042

I tried to hailraise it using the scripe you provided. When I tried to install it failed with bunch of build.prop mismatch and status 7 error. So as suggested earlier, I extracted its build.prop and edited it to match our device, but still it fails with same error. My proficieny in this area ends here and don't know what else to do here !!

I'm really interested in this build, as this is the only rom thats not based on cm10 exp build , but its made from the aosp source code directly and thus I hope it solves my media scanner issue and I could have a jb rom to work with.

Thanks !!!

I should have made this clearer since nothing needs to be done with the build.prop from the rom you are flashing. In the install script, the rom is trying to verify you are running a specific device such as a GT-I9100 and your SGH-I777 does not match. The install is looking at the build.prop in the rom currently installed in your phone.

What you need to do is delete the lines in the install script that are looking for a specific build.prop device listing. The lines are usually some of the first lines in the install script and you will be able to recognize them because they list device names.

In the meantime Google SGH-I77 status 7 error. I am pretty patient and have made plenty of mistakes learning a few things. A LOT of users here will either ignore you or call you names or question your intelligence/parentage because they get tired of answering questions already answered 1,000 times.

By the way....CM10 is AOSP based. For our phone, roms are either Samsung based or AOSP based.

I am downloading the rom you mentioned to give you the most complete instructions. Be back in a few!

---------------------------------------------------------------------------------------------------------------------------------------------------------------

I have now downloaded the rom and the install script does have the build.prop asserts I spoke of earlier.

Extract the rom you downloaded. Navigate to the META-INF folder and keep going through the following folders - com / google / android

You will see update-binary and updater-script.

Open the updater-script with your preferred text editor (I use Notepad++ but regular Notepad is fine.)

Delete the first 7 lines in the updater-script - - these are the assert lines checking for the specific device:

assert(getprop("ro.product.device") == "galaxys2" || getprop("ro.build.product") == "galaxys2" ||
getprop("ro.product.device") == "i9100" || getprop("ro.build.product") == "i9100" ||
getprop("ro.product.device") == "GT-I9100" || getprop("ro.build.product") == "GT-I9100" ||
getprop("ro.product.device") == "GT-I9100M" || getprop("ro.build.product") == "GT-I9100M" ||
getprop("ro.product.device") == "GT-I9100P" || getprop("ro.build.product") == "GT-I9100P" ||
getprop("ro.product.device") == "GT-I9100T" || getprop("ro.build.product") == "GT-I9100T");
show_progress(0.500000, 0);

Delete those lines and save the file. Rezip the rom using 7zip, load the modified rom on your phone and flash according to my instructions in the OP.
Last edited by mattern1974; 6th August 2012 at 03:07 PM.
The Following 2 Users Say Thank You to mattern1974 For This Useful Post: [ View ]

Read More
Post Reply Subscribe to Thread
Previous Thread Next Thread
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes