money against help

---

After hours !!! trying almost every advice I don`t know what to do ! I would for the help !

hardspl process

I did everything what is written here and it still doesn`t work:

step by step:
- this is ONLY for warranty reasons. i.e. the device needs repair and you have to send it to htc to get it serviced. if you plan to restore hardspl then don't even bother flashing this stock package, unless you are some kind of hacker/dev
- IMPORTANT: be sure to first restore stock OS, and stock radio. stock SPL is always to be done last!!
- now the steps
1. download the stock spl package from this post.
2. download X1_HardSPL_v1 too, from this post.
3. run the hardspl package, but do not press Next button i.e do not go ahead with flash yet.
4. at this point, take the extracted stock SPL, a RUU_Signed.NBH file, and overwrite the other RUU_Signed.NBH in hardspl package.

Yes it should go to tricolour screen now and say 0.52.OliNex.MFG (this is SSPL!).

"Hard-SPL flashes, device automatically reboots, job done"

THIS never happened but it seems that I do have the hardspl done !

BUT - the next problem when I run the RUU process I get always the error message "update error 262" which is a coomunication error.

Is there hope for me ?

What exactly are you trying to do?
and please stop posting the same thing over again, people will answer you when they get a chance!


If you are trying to get to Hardspl then why are you trying to flash back to the stock spl??

Follow the proper instructions..

http://forum.xda-developers.com/showthread.php?t=431218

From the start of the post to the 3rd lot of stars ****



If you are trying to return to stockspl having already flashed Hardspl then you wont be able to flash any more roms except the stock one.

OK !

My steps:

0a) make sure you have .NET framework installed on your PC! if not, get it from http://www.microsoft.com/downloads/d...DisplayLang=en done

0b) if you have vista, WMDC update is recommended: http://www.microsoft.com/windowsmobi...ce-center.mspx

1) download Hard-SPL package from attachment, extract to an empty folder. done

2) it is recommended you download only the X1_HardSPL_v1.zip unless you want to tinker with MFG SPL (MFG SPL 0.52 is a separate attachment). only X1 done

3) you must Have Phone Synced with PC in Windows Mobile! done

4) run X1_HardSPL.exe. (if you want to flash MFG SPL: at this point replace the extracted RUU_Signed.nbh with the MFG version of RUU_Signed.nbh) done

5) follow steps in the RUU, and check on the device for prompts after PC shows loading bar. done

6) it should go to tricolour screen now and say 0.52.OliNex.MFG (this is SSPL!). done !!!

7) Hard-SPL flashes, device automatically reboots, job done. THIS doesn`t happen !

****
then once the screen is in SSPL (tricolour screen saying 0.52.OliNex), run RUU on the PC (i.e. the rest of the hardspl package) manually.
****

Have you tried this?

[QUOTE=fards;2988225]****
then once the screen is in SSPL (tricolour screen saying 0.52.OliNex), run RUU on the PC (i.e. the rest of the hardspl package) manually.
****

This next step is not possible because X1 and PC are never connected !

At the moment I`m working with the sd way but getting the answer "no image file"

the coloured display is saying

Kovs110
SPL-0.72....
microp1...
microp2....