Thanks Meter 253
Join Date: Sep 2006
Location: Ratchada (Bangkok)
Originally Posted by songokussm
how necessary is it to order the lcd as well?
a digitizer is 20 bucks. an lcd+digitizer is 60 with a 2 week wait. or 70 with a week wait.
PS my screen isn't cracked at all. just the digitizer stops working whenever the screen is shutoff. A hard end button press works, but it will eventually die. Through reading this thread it looks like a replacement is the only fix.
All down to your ability, best option is start strip first & upgrade if if required.
Also depends on current screen type too, if on older soldered 295 type then an upgrade to 300type full assembly is a good move.
Just digitizer is cheap but if fitted badly next to useless repair.
Bonding of digi must be dust proof, correct hight & alignment & strong, 3m tape alone really ain't up for the job long term ...
[DEVICE1] : [HD2][EU model as my TMOUS has mainboard charge circuit fault]
[ROM] : [Energy Dinik 23699 Nov24]
[OS] [WindowsMobile® 6.5.x][CHT2.0.S2.5]
[RADIO] : [2.12.50.02_2
[DEVICE2] : [OPPO Finder X9017] [ROOT
[DEVICE3] : [Raphael]
[ROM] : [Energy Dinik 23699]
[OS] [WindowsMobile® 6.5.x]
[RADIO] : [1.14.25.05 + RILPHONE.DLL]
[SOFTWARE] : [Mortscript
] [FingerKBD Eng/Thai (WVGA)
] [Thai Font/Input SIP