TF3D Blue Highlights Theme

[eidolen]

UPDATE:
1.Consolidated all theming files and screen-shots into this post for easier access.

2. Added 11 more files to the theme and cab packages including a working manila Internet Globe. No xml file to edit anymore.

3.Added LongPressEndKey Skin as an add-on cab.

4.Added cab or zip choice for manila globe





TF3D_HTC_Black-w-Blue_v1.theme
I used the "HTC_Black_v1.93_1.2b.theme" as my base and just patched my files and tsk file to it. The way I learned to install themes via Diamond_Config was to always reset to the stock theme first before applying a new theme and it seems to work well that way. The only problem I encountered was the need to change to a different Today theme and then Back to the Black-w-Blue_r2.tsk theme after it was installed. I'm not sure if that was just a problem for me with all my test themes I have on my device or not. So if you end up with a gray background on the "Start Menu" drop-down after installation, just pick a different Today theme and back again and all should be fine. You don't have to reboot when changing Today themes.

To use, extract the .theme file and copy to your device where you can find it. Then install using Diamond TF3D Config version 0.6.7

Download Here



1. Eidolen TF3D_Manilla_BlueHighlights_Patcher_r2
This will overwrite the 50+ files in your windows directory that have green in them. It also correctly sets the colors under HKLM\Software\HTC\Phone to give you blue highlights when using the dialer. Lastly it sets colors under HKLM\Software\Microsoft\Color to"try" to set the proper system colors but it will depend on what Today theme you have installed. If for some reason you don't like the results you can just change your Today theme to something else and back again and it will be back to what you are used to. Otherwise you might want to try one of Today themes I made specifically to go with this cab.

This is for people already using an HTC Black theme and just want to change the Highlights to Blue. If you are using the Diamond Config Tool then you should use the theme package from above.

Download HERE



2. Eidolens_Black-w-Blue.tsks.zip

There are 4 Today themes here that vary from a very basic no frills black with blue highlights, to more elaborate themes that take advantage of the gradient support and uses a wider variety of colors for message pop-ups. They are so easy to change out that if you find something you don't like in one, just try the next. If you are a true "Blue" freak you may want to try Microsoft's free theme called Dark. It will give you deep blue 3D bars and blue highlights throughout. It was a little much for me but it does match very well with my blue highlight patch. Look at the screen-shots of the main theme for a preview of Black-w-Blue_r2.tsk.


Download HERE

3. Eidolen PocketCM_DarkDiamondII03VGA_Blue_Patch.cab
This is just for people that are using PocketCM with this exact theme. I couldn't stand having blue everywhere and then green in my contacts. This makes no changes other than overwriting the 17 files that have green in them in the default directory. "Program Files\PocketCM\Dark Diamond II 0.3 VGA" Check out the authors thread HERE for program info and font package.

Download HERE



Eidolen_Manila_Globe_BluBlk.zip
Eidolen Manila_Internet_Globe_BluBlk.cab

This turned out to be more difficult than anything else I've themed so far. I've found that most themes address this by editing one of the xml files and call the images that way, effectively bypassing the original manila file. It works that way but is horribly slow to load every time you scroll to the Internet tab. I was finally able to figure out how to edit the manila file directly so now you can have the graphic load at stock speeds if not quicker as the file size is actually smaller now.

You can read about it HERE if you'd like to edit your own instead of the ones I supplied here. I'm posting both a cab and zip. Just install cab as usual or extract the 2 manila files from the zip directly into your windows folder on your device.

Download Cab HERE
Download Zip HERE



Eidolens_LongEndKey_Transparent_Skin.cab

I created a new skin for the HTC Long Press End Key App since it was out of place with every theme I've seen for TF3D. I must admit that my inspiration was from a dialer I found and liked. All the credit for the design should go to that author. His thread can be found HERE

The cab is very straight-forward as it only replaces the actual png files in your windows directory and makes no other modifications. I would imagine this should work for any VGA HTC device that has the LongPressEndKey app installed. The install will prompt you to reboot after install and I highly recommend doing so.

Download HERE



NOTES:
1.If you want the IPC Dialer that is in the screen-shots for the main theme, you can find it HERE



*As always make sure to backup your files in the event you want to change back to what you had.*

Cheers,
Eidolen

[groofoo]

looks realy good.

will try it later.

[eidolen]

Some of the differences between the "Today" themes.

Eidolen

[Maveaxe]

Is it possible just to get the dialer?

[eidolen]

Sure, here ya go.

*Edit* Found the author's post so linking to it instead:
http://forum.xda-developers.com/showthread.php?t=438412

[ascorpion]

nice! But i have 1 problem. Select of Opera Browser is white.

oh and in dialer my contacts are also white and i have white background so it's invisible

[eidolen]

UPDATE: Found a way to avoid using this method. New cab and zip listed in first post. Will leave files attached though I can't think why any would want them.

Originally Posted by ascorpion nice! But i have 1 problem. Select of Opera Browser is white. oh and in dialer my contacts are also white and i have white background so it's invisible

Thanks for the feedback. I'm still quite new and am learning as I go. I never tested the globe before posting so I apologize for that. After much research I found out that there are a few ways to handle "skinning" the globe. For now in the patch I am removing it all together as I have not found a way to skin it directly using the stock .qtc method. The alternative is to modify the file that calls the stock file, and redirect it to one of our choosing. The problem here is that turns out to be different files depending if you have a AT&T Fuze or not. (There may be others but I have no way of knowing for sure.) So I made a blue globe patch for both types just to be safe. They are very basic patches consisting of 3 files each. 2 are the selected and non_selected pictures and the xml/manilla file.

The Up side to this method is you can swap out you globe pictures easily at will at anytime by overwriting the .png files in your windows directory with pictures of the same size and names. The Down side is it takes a good bit longer to load up which is why I didn't put them in the updated patch and made them optional addons. I didn't try loading smaller files to time the loading so you my get better results with a more optimized, less elaborate pictures. Not really sure.


Here's the code for both cabs:

Eidolen TF3D_Blue_Globe.cab (Windows\27c65cbd_manila)
Eidolen TF3D_Blue_Globe_FUZE.cab.cab / (\Application Data\Manila\InternetPortal-en-US.xml)

<?xml version="1.0" encoding="utf-16"?>
<InternetPortal>
<IncludeUserFavorites>True</IncludeUserFavorites>
<Banner
DefaultImagePath="\Windows\qiu.png"
SelectedImagePath="\Windows\sqiu.png"
Text="Launch Opera Mobile Browser"
NavigateUrl="http://www.google.com"
Width="480"
Height="215" />
<OperatorLinks>
<Link
Text="YouTube"
Executable="\windows\youtube.exe"
ImagePath="\Windows\HTC\Assets\Images\InternetPort al\youtube.qtc" />
</OperatorLinks>
</InternetPortal>



The code is identical for both, but there are called by different files. I have tried the Fuze cab without any problem but have no way to test the other. If there are any problems I'll see what I can do but it really should work. If it doesn't it shouldn't be a problem trying the other. Especially since you've already backed up your files. Right?

I'm sorry about the dialer problem. It's hard for me to test the exact problem you are having as my base themes have always been black. If you used the dialer I posted, that wasn't my making so I can't help you with that. Try searching the forums for the cab name and see if others have had the same trouble. The only thing my cabs did was to change some color settings for the phone screen to set the highlight blue. Those setting don't deal with transparency or graphics at all. Let me know what you find.

Cheers,
Eidolen

[eidolen]

UPDATE: Get new version in first post.

Well I gave it a shot. I used the "HTC_Black_v1.93_1.2b.theme" as my base and just patched my files and tsk file to it. I completely removed anything to do with the globe files until I can find a way to make it work on all devices. Until them you can try one of the addons I posted above.

The way I learned to install themes via Diamond_Config was to always reset to the stock theme first before applying a new theme and it seems to work well that way. The only problem I encountered was the need to change to a different Today theme and then Back to the Black-w-Blue_r2.tsk theme after it was installed. I'm not sure if that was just a problem for me with all my test themes I have on my device or not. So if you end up with a gray background on the "Start Menu" drop-down after installation, just pick a different Today theme and back again and all should be fine. You don't have to reboot when changing Today themes.


If there are any problems I'll do my best to sort them out.


Cheers,
Eidolen

To use, extract the .theme file and copy to your device where you can find it. Then install using Diamond TF3D Config version 0.6.7


Update: Put .theme file inside zip instead of having to rename like before. Sorry for those who experienced trouble.

[mike911]

Hi Eidolen,
i my be a bit stupid, but how to install the TF3D_HTC_Black-w-Blue.zip after renameing it with Diamond config? Where do I have to copy the file to. Storage Card?Sorry to bother you, but I really would like to know the How To ? THANK YOU, Mike911

[eidolen]

Originally Posted by mike911 Hi Eidolen, i my be a bit stupid, but how to install the TF3D_HTC_Black-w-Blue.zip after renameing it with Diamond config? Where do I have to copy the file to. Storage Card?Sorry to bother you, but I really would like to know the How To ? THANK YOU, Mike911

Hi Mike911,
To use .theme files you need a program called "Diamond Config Tool". This program allows you to swap themes out instead of having to install them manually. The program can be found HERE. You should read up thoroughly before attempting to change themes. Once you feel comfortable enough to try it you need to download the file I listed here and rename the ".zip" extension to ".theme". At that point you should copy the file over to your phone somewhere easy to find. Then open up Diamond Config Tool and go to the second tab labeled "Appearance" This is where you will be able to select themes.

I can't stress enough that you should fully understand what you are doing and back up all your files before trying any of this. Themes should not damage you device but they can make things difficult if something goes wrong like not being able to read text if the font color is the same as the background color, and so on. There are plenty of good guides around and some tremendous themes to try out once you get going. I also recommend doing a search on YouTube for Diamond Config Tool and TF3D as watching someone do it makes it alot easier than just reading about it.

Hope that helps you out some.

Cheers,
Eidolen