Unable to install LF2

---

Hello friends,

I had been running LF2 for the past few months successfully but i had installed Frankenstein's Mod which i did not prefer over stock due to stability issues. Now when i reflashed LF2 with the PIT file, My device doesnt boot up and keeps restarting after showing the Samsung page. I had to install XXKPQ which is Serbian i suppose to successfully recover my device and it updated to LE4 via Kies.

I am having stability issues now with LE4 and extremely poor battery life.

Please can anybody guide me how do i get back my LF2 again so please tell me which ROM should i Flash before

Thank you!

Originally Posted by ronak_143

Hello friends,

I had been running LF2 for the past few months successfully but i had installed Frankenstein's Mod which i did not prefer over stock due to stability issues. Now when i reflashed LF2 with the PIT file, My device doesnt boot up and keeps restarting after showing the Samsung page. I had to install XXKPQ which is Serbian i suppose to successfully recover my device and it updated to LE4 via Kies.

I am having stability issues now with LE4 and extremely poor battery life.

Please can anybody guide me how do i get back my LF2 again so please tell me which ROM should i Flash before

Thank you!

If you want stability and battery life, perhaps XXKPQ is for you.. the best ROM in my opinion is XXKPQ and JPKPH

Sent from my GT-I9100 using xda premium

Ok guys i've found out the solution for those who want their default indian roms in their devices

DDKP1 with PIT->then DDKP3 with PIT->Install BAM kernel then connect to KIES to get LF2 easily

Originally Posted by ronak_143

Ok guys i've found out the solution for those who want their default indian roms in their devices

DDKP1 with PIT->then DDKP3 with PIT->Install BAM kernel then connect to KIES to get LF2 easily

That's great that you found it!

Sent from my GT-I9100 using xda premium

Originally Posted by saywhatt

That's great that you found it!

Sent from my GT-I9100 using xda premium

Alas, it failed though. It does a factory reset every time i restart the phone Any suggestions how to repair this now

Originally Posted by ronak_143

Alas, it failed though. It does a factory reset every time i restart the phone Any suggestions how to repair this now

I think you need a clean install from scratch.

Here the guides on how to --> http://forum.xda-developers.com/show....php?t=1133787

Originally Posted by ronak_143

Ok guys i've found out the solution for those who want their default indian roms in their devices

DDKP1 with PIT->then DDKP3 with PIT->Install BAM kernel then connect to KIES to get LF2 easily

You will need following before beginning installation:
1) Flsher Program + PIT (ODIN3 + Latona.PIT)
2) Firmware: I9003XXKPE
3) Firmware: I9003DDLF2 (http://www.hotfile.com/dl/161660941/...2_INU.zip.html)


STEPS:
1) Open ODIN. Connect ur phone in download mode. just flash Latona.PIT file with Re-Partition selected.
2) Once flashed, Ur phone will reboot automatically but will show only black screen with background light. Do not worry. Open the back cover, remove the battery, insert battery and boot again in download mode.
3) Close ODIN. Open it again. Now we will be installing XXKPE.
i) Select Latona.PIT File in ODIN. (Make sure the "Re-Partition" is unchecked once you have selected PIT file)
ii) Select "APBOOT_I9003XXKPE_CL409735_REV08_user_low_ship.ta r.md5" in bootloader.
iii) Select "CODE_I9003XXKPE_CL409735_REV08_user_low_ship.tar. md5" in PDA.
iv) Select "MODEM_I9003XXKPE_REV_00_CL1041909.tar.md5" in PHONE.
v) Select "GT-I9003-CSC-MULTI-OXAKPE.tar.md5" in CSC.

Now flash it.

this will successfully install XXKPE on ur device. Once your flash is complete, ur device will boot and will ask for initial config. U can set it or just power off ur device and boot again in download mode.

Now will install DDLF2.
i) Select Latona.PIT File in ODIN. (Make sure the "Re-Partition" is unchecked once you have selected PIT file)
ii) Just select "I9003DDLF2_I9003ODDLF2_I9003DDLE1_HOME.tar.md 5" in your PDA and flash.

U are now on DDLF2.

Originally Posted by pranshah

You will need following before beginning installation:
1) Flsher Program + PIT (ODIN3 + Latona.PIT)
2) Firmware: I9003XXKPE
3) Firmware: I9003DDLF2 (http://www.hotfile.com/dl/161660941/...2_INU.zip.html)


STEPS:
1) Open ODIN. Connect ur phone in download mode. just flash Latona.PIT file with Re-Partition selected.
2) Once flashed, Ur phone will reboot automatically but will show only black screen with background light. Do not worry. Open the back cover, remove the battery, insert battery and boot again in download mode.
3) Close ODIN. Open it again. Now we will be installing XXKPE.
i) Select Latona.PIT File in ODIN. (Make sure the "Re-Partition" is unchecked once you have selected PIT file)
ii) Select "APBOOT_I9003XXKPE_CL409735_REV08_user_low_ship.ta r.md5" in bootloader.
iii) Select "CODE_I9003XXKPE_CL409735_REV08_user_low_ship.tar. md5" in PDA.
iv) Select "MODEM_I9003XXKPE_REV_00_CL1041909.tar.md5" in PHONE.
v) Select "GT-I9003-CSC-MULTI-OXAKPE.tar.md5" in CSC.

Now flash it.

this will successfully install XXKPE on ur device. Once your flash is complete, ur device will boot and will ask for initial config. U can set it or just power off ur device and boot again in download mode.

Now will install DDLF2.
i) Select Latona.PIT File in ODIN. (Make sure the "Re-Partition" is unchecked once you have selected PIT file)
ii) Just select "I9003DDLF2_I9003ODDLF2_I9003DDLE1_HOME.tar.md 5" in your PDA and flash.

U are now on DDLF2.

Works perfectly Thank you!