XP Vibrates but no SE logo at boot up even with flashtool
Hello I recently changed motherboards on my R800x and have had nothing but issues since. The XP no longer boots properly it just vibrates and NO SE logo at all. I HAVE preformed a flash recovery with flashtool successfully but when the flashtool says rebooting nothing happens, unconnect usb and power up leads to my original issue no SE logo at bootup. Here is the flashtool log for my phone:
26/043/2012 22:43:12 - INFO - Start Flashing
26/043/2012 22:43:12 - INFO - Flashing loader
26/043/2012 22:43:15 - INFO - Loader : S1_Loader_Root_773f - Version : R4A066 / Bootloader status : ROOTABLE
26/043/2012 22:43:15 - INFO - Flashing kernel.sin
26/043/2012 22:43:17 - INFO - Flashing fota0.sin
26/043/2012 22:43:18 - INFO - Flashing fota1.sin
26/043/2012 22:43:19 - INFO - Flashing adsp.sin
26/043/2012 22:43:22 - INFO - Flashing amss_fs.sin
26/043/2012 22:43:22 - INFO - Flashing amss.sin
26/043/2012 22:43:32 - INFO - Flashing apps_log.sin
26/043/2012 22:43:32 - INFO - Flashing system.sin
26/045/2012 22:45:16 - INFO - Flashing userdata.sin
26/045/2012 22:45:18 - INFO - Flashing cache.sin
26/045/2012 22:45:19 - INFO - Ending flash session
26/045/2012 22:45:19 - INFO - Flashing finished.
26/045/2012 22:45:19 - INFO - Please wait. Phone will reboot
26/045/2012 22:45:19 - INFO - For flashtool, Unknown Sources and Debugging must be checked in phone settings
Nothing happens after this, just like before I used flashtool. The screen worked fine prior to changing motherboards (no touch functionality though). I am so lost I even went back to the original motherboard to at least boot up android but the issue applies to both motherboards now. What am I doing wrong am I missing a step after the flash b/c my XP does not restart like it says in the flashtool log. Why would this apply to the original motherboard when it had a working version of android running (it's saved on the motherboards memory not SD right?) I know I sound like a noob but I never ran into an issue like this on my G1/Thunderbolt. All I can guess that there is an issue with the display now even though ALL ribbons are connected properly and it worked prior to switching motherboards
Any help is appreciated!