[GT-I9070] [ROOT] Rooting your Galaxy S Advance without increasing the Binary Counter

Search This thread
By:
Advanced…
E

emme1

Senior Member
Nov 10, 2012
110
22
  • Like
Reactions: carepack
S

snooker86

Member
Sep 22, 2008
8
0
this firmware include twrp recovery?

if afther this fw i'll install another rom the binary counter will increase?
thanks



diego-ch said:
DISCLAIMER:


I'm NOT responsible for any damage you cause to your phone.
Be sure to follow the steps correctly.​



REQUIREMENTS:
  • Windows

  • Samsung KIES and all drivers installed.

  • ODIN for flashing the firmware.



HOW TO ROOT:
  1. Download the Pre-Rooted firmware that matches the firmware your using.


  2. Extract the RAR file, you will end up with a folder with two files in it.
    SYSTEM_YOURFIRMWARE.tar.md5 and CSC_YOURFIRMWARE.tar.md5


  3. Close any KIES application that might be open.


  4. Open ODIN.


  5. Select the file SYSTEM_YOURFIRMWARE.tar.md5 as PDA.


  6. Select the file CSC_YOURFIRMWARE.tar.md5 as CSC.


  7. Verify that ONLY "AUTO REBOOT" and "F. RESET TIME" are selected.
    Do NOT select "Repartition"


  8. Boot your phone in "DOWNLOAD MODE" by holding POWER + HOME + VOL. DOWN


  9. Plug your phone usb cable to your computer.
    If you've never connected your phone to your computer in download mode you'll have to wait for it to install the drivers


  10. Click the "START" button and wait for it to finish.
    Do NOT unplug the usb cable before ODIN finishes its job.


    If you did everything correctly, after a few minutes, ODIN will show the message "PASS"
    Then you can remove the usb cable.
    Your device will reboot in Recovery Mode and will finish the installation.
    When it finishes, it will reboot and start the Android System.



  11. Now, go to the "Google Play Store" and Install the app "Super SU" (or "Superuser").





That's it! :good:
Now, enjoy your rooted Galaxy S Advance! :cool:
You can go back to Download Mode to check that your Binary Counter hasn't increased.



DONATIONS:
Consider making a donation,
It helps support developers so they can keep doing a great job!
Donate via Paypal :good:
Click to expand...
Click to collapse
 
T

tedclon

Member
Apr 19, 2011
5
0
I9070UBLD4_I9070UVCLE1_CTI_ROOTED_SUPERSU[/B]

Here we go.... SuperSU is installed

Please report.[/QUOTE]

Confirmed... All is Ok!!!

Enviado desde mi GT-I9070 usando Tapatalk 2
 
F

fluffi444

Senior Member
Nov 19, 2012
1,600
932
Amazon Fire TV
Samsung Galaxy S9+
XiNzeRy said:
REGION: XME (Malaysia) | PDA: I9070DXLD1 | CSC: I9070OLBLD1
So i can use old version?

REGION: XME (Malaysia) | PDA: I9070DXLK2 | CSC: I9070OLBLK2
Im update to new fw via kies cos no ota update.. Root access gone..
Click to expand...
Click to collapse

mmm - Me (and others) got an OTA update via Phone internal update function. And ROOT stays with this...

But if you already made an complete FW update via KIES you cannot use the Files I9070DXLD1 | CSC: I9070OLBLD1 anymore (or its not recommended - I don't know what will happen)

Or you make a complete FW flash to old Version and then use the files of the first post again. But this way sucks! I know! :D

When I'm back home I'll do it for XME (Malaysia) | PDA: I9070DXLK2 | CSC: I9070OLBLK2 also (as an exception...) ;)

However - I do not recoment to use KIES for flashing, updating, etc.... Use ODIN 1.85!
Please use search function to find one of the uncountable HOW TO's regarding this...
 
  • Like
Reactions: XiNzeRy
X

XiNzeRy

Member
Jul 2, 2012
17
1
Penang
Xiaomi Poco F3
fluffi444 said:
mmm - Me (and others) got an OTA update via Phone internal update function. And ROOT stays with this...

But if you already made an complete FW update via KIES you cannot use the Files I9070DXLD1 | CSC: I9070OLBLD1 anymore (or its not recommended - I don't know what will happen)

Or you make a complete FW flash to old Version and then use the files of the first post again. But this way sucks! I know! :D

When I'm back home I'll do it for XME (Malaysia) | PDA: I9070DXLK2 | CSC: I9070OLBLK2 also (as an exception...) ;)

However - I do not recoment to use KIES for flashing, updating, etc.... Use ODIN 1.85!
Please use search function to find one of the uncountable HOW TO's regarding this...
Click to expand...
Click to collapse



tQ:victory::good:
 
D

Dean27

Senior Member
Feb 3, 2011
131
5
Hello I put rom pre roteada REGION: OXA (Open Europe) PDA: I9070XXLD1 CSC: only I9070OXALD1 would have to put the supersu? or we need also the busybox? or do I need the PDA
 
You must log in or register to reply here.

Similar threads

qzem
  • Locked
[HOW TO] Samsung Galaxy S I9070 Advance ROOT for most firmwares!
Replies
806
Views
703K
Jonny
Jonny
qzem
[For DEV] Samsung Galaxy S I9070 Advance kernel & platform source code
Replies
1K
Views
367K
shut_down
shut_down
arkhan11
  • Locked
[INDEX][upd OCT 7, 2013]Galaxy S Advance i9070 / i9070P
Replies
357
Views
369K
Jonny
Jonny
D
[GT-I9070][Kernel][GINGERBREAD] Stock Kernel + TWRP Recovery for Galaxy S Advance
Replies
294
Views
269K
J
jfjkeuren
V
  • Sticky
[LIST]All Stock Frimwares - Galaxy S Advance
Replies
169
Views
218K
Toan-5
Toan-5

Top Liked Posts

24 Hours All time
  • There are no posts matching your filters.
  • 87
    D
    diego-ch
    DISCLAIMER:


    I'm NOT responsible for any damage you cause to your phone.
    Be sure to follow the steps correctly.    ​



    REQUIREMENTS:
    • Windows

    • Samsung KIES and all drivers installed.

    • ODIN for flashing the firmware.



    HOW TO ROOT:
    1. Download the Pre-Rooted firmware that matches the firmware your using.


    2. Extract the RAR file, you will end up with a folder with two files in it.
      SYSTEM_YOURFIRMWARE.tar.md5 and CSC_YOURFIRMWARE.tar.md5


    3. Close any KIES application that might be open.


    4. Open ODIN.


    5. Select the file SYSTEM_YOURFIRMWARE.tar.md5 as PDA.


    6. Select the file CSC_YOURFIRMWARE.tar.md5 as CSC.


    7. Verify that ONLY "AUTO REBOOT" and "F. RESET TIME" are selected.
      Do NOT select "Repartition"


    8. Boot your phone in "DOWNLOAD MODE" by holding POWER + HOME + VOL. DOWN


    9. Plug your phone usb cable to your computer.
      If you've never connected your phone to your computer in download mode you'll have to wait for it to install the drivers


    10. Click the "START" button and wait for it to finish.
      Do NOT unplug the usb cable before ODIN finishes its job.


      If you did everything correctly, after a few minutes, ODIN will show the message "PASS"
      Then you can remove the usb cable.
      Your device will reboot in Recovery Mode and will finish the installation.
      When it finishes, it will reboot and start the Android System.



    11. Now, go to the "Google Play Store" and Install the app "Super SU" (or "Superuser").





    That's it! :good:
    Now, enjoy your rooted Galaxy S Advance! :cool:
    You can go back to Download Mode to check that your Binary Counter hasn't increased.



    DONATIONS:
    Consider making a donation,
    It helps support developers so they can keep doing a great job!
    Donate via Paypal :good:
    View
    38
    D
    diego-ch
    GT-I9070 Rooted Firmwares:


    REGION: ARO (Argentina) | PDA: I9070UBLD1 | CSC: I9070UVOLD1
    DOWNLOAD

    REGION: AUT (Switzerland) | PDA: I9070XXLD1 | CSC: I9070OXXLD1
    DOWNLOAD

    REGION: CHL (Claro Chile) | PDA: I9070UBLD4 | CSC: I9070CHLLE3
    DOWNLOAD

    REGION: CHO (Chile) | PDA: I9070UBLD4 | CSC: I9070CHOLE1
    DOWNLOAD

    REGION: CNX (Vodafone RO) | PDA: I9070XXLF4 | CSC: I9070CNXLC1
    DOWNLOAD

    REGION: COA (Cosmote Romania) | PDA: I9070XXLD1 | CSC: I9070OXFLC2
    DOWNLOAD

    REGION: DBT (Germany) | PDA: I9070XXLD1 | CSC: I9070DBTLC1
    DOWNLOAD

    REGION: EUR (Greece) | PDA: I9070XXLD3 | CSC: I9070XXLD4
    DOWNLOAD

    REGION: HUI (H3G Italy) | PDA: I9070NELH2 | CSC: I9070HUILH2
    DOWNLOAD

    REGION: INU (India) | PDA: I9070DDLJ1 | CSC: I9070DDLJ1
    DOWNLOAD

    REGION: INU (India) | PDA: I9070DDLI1 | CSC: I9070DDLD4
    DOWNLOAD

    REGION: ITV (Italy) | PDA: I9070XXLD3 | CSC: I9070ITVLD1
    DOWNLOAD

    REGION: LUX (Luxemburg) | PDA: I9070XXLD1 | CSC: I9070LUXLC1
    DOWNLOAD

    REGION: NEE (Nordic Countries) | PDA: I9070XXLD1 | CSC: I9070OXXLD1
    DOWNLOAD

    REGION: OMN (Vodafone IT) | PDA: I9070BULE2 | CSC: I9070OMNLE1
    DOWNLOAD

    REGION: OXA (Open Europe) | PDA: I9070XXLD1 | CSC: I9070OXALD1
    DOWNLOAD

    REGION: OXX | PDA: I9070XXLE2 | CSC: I9070OXXLD4
    DOWNLOAD

    REGION: PRT (Play PL) | PDA: I9070XXLF4 | CSC: I9070PRTLF1
    DOWNLOAD

    REGION: SWC (Swisscom CH) | PDA: I9070BULE2 | CSC: I9070SWCLC1
    DOWNLOAD

    REGION: TCE (Mexico) | PDA: I9070UBLD1 | CSC: I9070TCELC1
    DOWNLOAD

    REGION: TCL (Vodafone PT) | PDA: I9070XXLE2 | CSC: I9070TCLLE1
    DOWNLOAD

    REGION: TRA (Croatia) | PDA: I9070XXLD3 | CSC: I9070OXFLE1
    DOWNLOAD

    REGION: TTT (Trinidad and Tobago) | PDA: I9070UBLD1 | CSC: I9070UUBLC1
    DOWNLOAD

    REGION: UFN (Movistar AR) | PDA: I9070VSLD1 | CSC: I9070TFGLD1
    DOWNLOAD

    REGION: XEO (Poland) | PDA: I9070XXLD1 | CSC: I9070XXLD1
    DOWNLOAD

    REGION: XME (Malaysia) | PDA: I9070DXLD1 | CSC: I9070OLBLD1
    DOWNLOAD

    REGION: XSE (Indonesia) | PDA: I9070DXLD1 | CSC: I9070OLBLD1
    DOWNLOAD

    REGION: XTC (Sun Philippines) | PDA: I9070DXLD1 | CSC: I9070OLBLD1
    DOWNLOAD

    REGION: ZTM (TIM Brasil) | PDA: I9070VJLD1 | CSC: I9070ZTMLD1
    DOWNLOAD










    Requests Suspended till JB ROM is released!

    root your phone before making the ota update and the root will remain.

    do not use kies to update the phone.
    View
    17
    D
    diego-ch
    GT-I9070P (NFC Version) Rooted Firmwares:



    REGION: ATO (Open Austria) | PDA: I9070PXXLD4 | CSC: I9070PATOLE1
    DOWNLOAD

    REGION: DBT (Germany) | PDA: I9070PXXLD2 | CSC: I9070PDBTLD2
    DOWNLOAD

    REGION: SEB (Baltic) | PDA: I9070PXXLD4 | CSC: I9070PSEBLD1
    DOWNLOAD

    REGION: TIM (TIM Italy) | PDA: I9070PAILE1 | CSC: I9070PTIMLD1
    DOWNLOAD

    REGION: TMU (T-Mobile UK) | PDA: I9070PBVLF1 | CSC: I9070PTMULE1
    DOWNLOAD

    REGION: TMZ (T-Mobile CZ) | PDA: I9070PBOLE2 | CSC: I9070PTMZLE2
    DOWNLOAD

    REGION: TPL (T-Mobile PL) | PDA: I9070PBOLE2 | CSC: I9070PTPLLE3
    DOWNLOAD

    REGION: VDH (Hungary) | PDA: I9070PBXXLE1 | CSC: I9070PVDHLE1
    DOWNLOAD


    View
    8
    D
    diego-ch
    I did root more firmwares,
    I just need some time to upload them.
    I'll upload them tonight.
    View
    7
    D
    diego-ch
    okay guys,
    now I have 10 requests for the I9070 and 7 for the I9070P (that's around 5gb for me to download and then upload)
    but I'll start uploading them today

    Code: 
    I9070
1.  XSE DXLD1 LBLD1
2.  EUR XXLD3
3.  CNX XXLF4 CNXLC1
4.  CHO UBLD1 CHOLD4
5.  XTC DXLD1 OLBLD1
6.  TRA XXLD3
7.  XME DXLD1 OLBLD1
8.  INU DDLJ1 ODDLJ1
9.  PRT XXLF4 PRTLF1
10. TCE UBLD1

+ 7 more I9070P firmwares

    please wait for me to upload these before making more requests



    ferrettijr said:
    Alright. Thanks so much.

    Certo, muito obrigado.:laugh:
    Click to expand...
    Click to collapse

    CHO reuploaded. please test the new link.
    View

New posts