FORUMS

What Do You Think About Fingerprint Scanners?

More and more phones are featuring fingerprint scanners, and with many promising … more

What’s Next for Samsung and Its Flagships?

If we were to say that the Galaxy S6 was a leap of faith made by Samsung, we … more

The Ultimate Showcase of dBrand Skins

In the search for ways to protect, accessorize, and personalize; a user has many options. One … more

Huawei’s Rapid Rise to Third Place in the Smartphone Race

Huawei has quickly grown to become one of the world’s biggest … more

CM 10.2 for Canadian Optimus G (E973/E971)

2,014 posts
Thanks Meter: 1,695
 
By chadouming, Senior Member on 5th December 2012, 05:27 PM
Post Reply Subscribe to Thread Email Thread
Hi, This is a continuation of the CM 10.1 nightlies thread. Things has been moving on and we are now at CM 10.2. I have been working with xboxfanj, houstonn and bbelos to bring you this. Again, this is based on mako with adapted change for optimus G. This time we are even more in sync with CAF (Code Aurora Forum).

What is working
Everything.

What is not working

You tell me.

Here are the repo needed for our devices :

https://github.com/TeamPlaceHolder

Of course, you have to be rooted, to have bootloader unlocked and a working recovery to flash this custom rom.

DO NOT FLASH NEXUS 4 KENEL MADE BY 3rd PARTY. THIS WILL MOSTLY PERMA BRICK YOUR DEVICE.

This is simply because people tend to use partition number and not by-name and our partition is different than nexus 4 ones. i.e. The rpm partition on our phone is the boot partition on nexus 4. So flashing a custom kernel will flash a boot.img in your rpm partition and then you are bricked. You have been warned.

Like usually, i can't be hold responsible if you damage your phone during any of the process described in this thread.

Thanks :

Thracky and houstonn who also works with me on this.

xplodwild
codeworkx
IOMonster
sk8erwitskil
faux123
dvhexer
Cyanogenmod Team

and a special thanks to shelnutt2 who shown me how to fix 3G
and juggie who found out the good file to change to get wifi working
Last edited by chadouming; 9th September 2013 at 01:16 PM.
The Following 48 Users Say Thank You to chadouming For This Useful Post: [ View ]
 
 
5th December 2012, 05:27 PM |#2  
chadouming's Avatar
OP Senior Member
Flag On the interwebz
Thanks Meter: 1,695
 
More
Download
All the downloads will go here :

ribs.bbqdroid.org

Use geeb package

Gapps package :

http://goo.im/gapps

Modem :

There is a newer modem now available (From JB update. Houstonn and I extracted each of them and made flashable so you don't need to do the painful process of kdz only to get a new baseband)

MAKE SURE TO NOT FLASH KOREAN MODEM.

http://downloads.codefi.re/houstonn/lgog/modem
Last edited by chadouming; 18th September 2013 at 12:09 AM.
The Following 21 Users Say Thank You to chadouming For This Useful Post: [ View ]
5th December 2012, 05:27 PM |#3  
chadouming's Avatar
OP Senior Member
Flag On the interwebz
Thanks Meter: 1,695
 
More
How to intall that rom ?
This require you to have TWRP or CWM already installed on your device. I recommand the former. On our device, this mainly mean you have rooted your phone and unlocked the bootloader.

Apparently, it seems these instruction where not clear enough. So I'll try to make them dumbproof. If you are not following these instruction and it doesnt work, dont expect support. It's like buying a cake mix where you only need to add milk and call the company saying their product is bull****, you added water and only got a brick. To add to this metaphor, Asking if it's because you used CWM instead of twrp or reverse is like saying : Did it didnt work because i used a fork instead of a whip to mix it ?

To flash this rom, you have to be on older Bootloader. You can alternatively flash the bootloader i linked in this thread. Read the post carefully before you flash.
  1. Download file in the download section.
  2. Put the rom AND the gapps on your internal SDCard.
  3. Reboot into recovery.
  4. Flash CM rom.
  5. Flash Gapps package.
  6. DO A FACTORY RESET (EMPHASIS HERE)
  7. reboot into system
Last edited by chadouming; 16th March 2013 at 06:16 PM.
The Following 13 Users Say Thank You to chadouming For This Useful Post: [ View ]
5th December 2012, 05:39 PM |#4  
Senior Member
Thanks Meter: 23
 
More
Thos would work on the E971 from Rogers also? Im able to run ATT kernels and roms just like Telus E973, so i think it should be fine?
The Following User Says Thank You to theMaDHakkeR For This Useful Post: [ View ]
5th December 2012, 06:00 PM |#5  
babymatteo's Avatar
Senior Member
Flag SoCal
Thanks Meter: 750
 
More
Voted as Newsworhty Thread. Great work so far chadouming!
The Following User Says Thank You to babymatteo For This Useful Post: [ View ]
5th December 2012, 06:30 PM |#6  
chadouming's Avatar
OP Senior Member
Flag On the interwebz
Thanks Meter: 1,695
 
More
Quote:
Originally Posted by theMaDHakkeR

Thos would work on the E971 from Rogers also? Im able to run ATT kernels and roms just like Telus E973, so i think it should be fine?

I have not tested on E971 and can't test as i dont have one. If you want to test, make sure you have a backup.
The Following User Says Thank You to chadouming For This Useful Post: [ View ]
5th December 2012, 06:32 PM |#7  
Junior Member
Thanks Meter: 3
 
More
Just voicing my support, thanks for your hard work in getting the ball rolling.
The Following User Says Thank You to joncwchao For This Useful Post: [ View ]
5th December 2012, 06:46 PM |#8  
mandroid717's Avatar
Senior Member
Flag Ottawa
Thanks Meter: 148
 
More
This is awesome news. Very exciting. Just a stupid question. Would the ics lockscreen.apk work on this jb build?

Thks

Sent from my LG-E973 using xda app-developers app
5th December 2012, 07:25 PM |#9  
chadouming's Avatar
OP Senior Member
Flag On the interwebz
Thanks Meter: 1,695
 
More
Quote:
Originally Posted by gentledroid17

This is awesome news. Very exciting. Just a stupid question. Would the ics lockscreen.apk work on this jb build?

Thks

Sent from my LG-E973 using xda app-developers app

I don't think so, but I am not sure.

Sent from my Nexus 4 using xda premium
Last edited by chadouming; 5th December 2012 at 07:32 PM.
5th December 2012, 10:24 PM |#10  
Senior Member
Thanks Meter: 46
 
More
Is there ANY WAY you can add to this the changes in faux123's Nexus 4 kernel (see here http://rootzwiki.com/topic/36722-ker.../#entry1032460) to reduce the horrible msm_hsic_host wakelock battery drain?
5th December 2012, 10:47 PM |#11  
chadouming's Avatar
OP Senior Member
Flag On the interwebz
Thanks Meter: 1,695
 
More
Quote:
Originally Posted by brunes

Is there ANY WAY you can add to this the changes in faux123's Nexus 4 kernel (see here http://rootzwiki.com/topic/36722-ker.../#entry1032460) to reduce the horrible msm_hsic_host wakelock battery drain?

You sir, deserve a punch in the face. Come on. We are not at optimizing things. I'm still trying to figure out what is working or not. This is really stupid.

Note to all other user : I WILL NOT ACCEPT FEATURE BEFORE EVERY PROBLEMS HAVE BEEN SOLVED.

on a related note to your question, if you would have read carefully, you would have seen that i already use faux123 kernel . . .
Anyway, this is not going to be the case soon.
The Following 8 Users Say Thank You to chadouming For This Useful Post: [ View ]

Read More
Post Reply Subscribe to Thread
Previous Thread Next Thread
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes