Post Reply

[Kernel][2/03] jac0b.b7.1

OP jac0b

4th February 2013, 05:18 PM   |  #141  
Senior Member
Thanks Meter: 9
 
115 posts
Join Date:Joined: Mar 2011
Yes.

I'm not sure if it's a problem with the kernel (Ive been on b7 for a while now and have now issues) or Kernel Tuner, which I only recently downloaded a few days ago.

I did find that there is a setting inside of Kernel Tuner to reset all settings after a new kernel is flashed, but I'm not able to get back to it now because the app crashes when I open it.

---------- Post added at 12:18 PM ---------- Previous post was at 11:56 AM ----------

And now after about a million reboots and reflashing b7, clearing data in Kernel Tuner I'm able to change the settings again. I tried setting it to ktoons again and the same thing happens so my phone definitely doesn't like that governor.
4th February 2013, 05:31 PM   |  #142  
OP Senior Member
Flag Edgewater, FL
Thanks Meter: 252
 
201 posts
Join Date:Joined: Aug 2009
More
Quote:
Originally Posted by waktasz

Yes.

I'm not sure if it's a problem with the kernel (Ive been on b7 for a while now and have now issues) or Kernel Tuner, which I only recently downloaded a few days ago.

I did find that there is a setting inside of Kernel Tuner to reset all settings after a new kernel is flashed, but I'm not able to get back to it now because the app crashes when I open it.

---------- Post added at 12:18 PM ---------- Previous post was at 11:56 AM ----------

And now after about a million reboots and reflashing b7, clearing data in Kernel Tuner I'm able to change the settings again. I tried setting it to ktoons again and the same thing happens so my phone definitely doesn't like that governor.

The problem happened to me with ktoonservative when I set both CPUs to it.
7th February 2013, 07:53 AM   |  #143  
w0tha's Avatar
Senior Member
Flag Melbourne
Thanks Meter: 62
 
240 posts
Join Date:Joined: Jun 2012
More
Re: [Kernel][2/03] jac0b.b7.1
Quote:
Originally Posted by jac0b

I have not released a cm 10.1 kernel yet. More than likely tomorrow I will putting it out. Finishing the final touches now.

Sent from my One X using Tapatalk 2

Any news on this jac0b?

Sent from my One X using xda app-developers app
7th February 2013, 11:32 AM   |  #144  
Member
Thanks Meter: 12
 
36 posts
Join Date:Joined: Jan 2008
Re: [Kernel][2/03] jac0b.b7.1
Quote:
Originally Posted by jac0b

Put your lowest CPU clock to 384 instead of 192.

Sent from my One X using Tapatalk 2

Sadly it has nothing to do with CPU clock. It appears to me that it has everything to do with the digitizer. After putting in the pocket for a while s2w will stop working and screen frozen as if the touch screen gets to many touches in the pocket and simply overflows

Sent from my One X using xda app-developers app
7th February 2013, 03:27 PM   |  #145  
hv6478's Avatar
Senior Member
Thanks Meter: 214
 
518 posts
Join Date:Joined: Apr 2009
Re: [Kernel][2/03] jac0b.b7.1
I can't wait to try this with CM10.1!! For now I'll do some testing with CM10.

This should be fine to flash over rohan's kernel and reboot?

Edit: On second thought, I'll do a fresh wipe later to
do it properly.

Sent from my CM10ified Beast (a.k.a. HTC One XL)
7th February 2013, 06:29 PM   |  #146  
Cryptecks's Avatar
Senior Member
Flag Athens, Ohio
Thanks Meter: 660
 
418 posts
Join Date:Joined: Aug 2010
More
Quote:
Originally Posted by soulmad

Sadly it has nothing to do with CPU clock. It appears to me that it has everything to do with the digitizer. After putting in the pocket for a while s2w will stop working and screen frozen as if the touch screen gets to many touches in the pocket and simply overflows

Sent from my One X using xda app-developers app

I meant to come back and revisit this. I set my clocks to 384 and while the issue has definitely lessened considerably, it still happens occasionally requiring a hard reboot. Any ideas jac0b? It's certainly not a dealbreaker as the S2W and InteractiveX are worth it, but it sometimes happens at the most inopportune times.
The Following User Says Thank You to Cryptecks For This Useful Post: [ View ]
7th February 2013, 06:34 PM   |  #147  
OP Senior Member
Flag Edgewater, FL
Thanks Meter: 252
 
201 posts
Join Date:Joined: Aug 2009
More
Re: [Kernel][2/03] jac0b.b7.1
Quote:
Originally Posted by Cryptecks

I meant to come back and revisit this. I set my clocks to 384 and while the issue has definitely lessened considerably, it still happens occasionally requiring a hard reboot. Any ideas jac0b? It's certainly not a dealbreaker as the S2W and InteractiveX are worth it, but it sometimes happens at the most inopportune times.

Are you on 7.1?

Sent from my One X using Tapatalk 2
8th February 2013, 02:28 AM   |  #148  
hv6478's Avatar
Senior Member
Thanks Meter: 214
 
518 posts
Join Date:Joined: Apr 2009
Re: [Kernel][2/03] jac0b.b7.1
The digitizer should register nothing in your pocket. The phone might, for some reason, not be going into a full sleep/idle state perhaps.

Sent from my CM10ified Beast (a.k.a. HTC One XL)
27th February 2013, 11:56 PM   |  #149  
tfat1000's Avatar
Member
Thanks Meter: 1
 
51 posts
Join Date:Joined: Jan 2012
Quote:
Originally Posted by jac0b

Based off Cyanogenmod kernel.
Governors: AggressiveX, InteractiveX, Wheatley, Ktoonservative, Pegasusq, Conservative

I/O Scheduler: SIO I/O scheduler, Deadline tweaked

Other features: Sweep2Wake, increase max readahead buffer, CPU/GPU optimizations, disabled fsync, XZ compression, UV tweaks, GPU OC, Higher FSB, 4.7.3 optimization, Other misc tweaks, MPDecision & Thermal

No need to clear cache also, when you flash it will do it for you.

I have also added voltage control branch & CM-10.1 branch. These builds will be in the VC folder for voltage control and CM-10.1 for CM-10.1 of the download page.


Please let me know if you have any bugs or questions.
If you are posting any errors, please include logcat and kmsg if possible. Also please tell me what ROM you are using.

Thanks to rohan32 for all his help.


Code:
b7.1 - latest CM source
b7 - latest CM source, MPDecision, Thermal, GPU OC, tweaked "UP threshold" on some governors to 98%
b6.2 - merged with latest CM source
b6.1 - GPU OC, CPU1 clock follow CPU0
b6 - UV tweaks, Higher FSB, 4.7 optimization
b5.2 - added Pegasusq governor 
b5.1 - merged with CM source
b5 - added Ktoonservative governor
b4 - added multiple features most importantly sweep2wake
b3 - updated to interactiveX v2 
b2.2.1 - hopefully got a stable kernel
b2.2 - removed voltage control for stability
b2.1 - remove governors causing reboots
b2 - corrected cpu clock stepping
b1 - initial release

will it works well for AOKP jellybean 4.2 one xl?
28th February 2013, 12:16 PM   |  #150  
OP Senior Member
Flag Edgewater, FL
Thanks Meter: 252
 
201 posts
Join Date:Joined: Aug 2009
More
Re: [Kernel][2/03] jac0b.b7.1
Quote:
Originally Posted by tfat1000

will it works well for AOKP jellybean 4.2 one xl?

No this will not work on 4.2. I will be updating soon to include 4.2.

Sent from my HTC One X using Tapatalk 2

The Following User Says Thank You to jac0b For This Useful Post: [ View ]
Post Reply Subscribe to Thread
Previous Thread Next Thread
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes


Top Threads in One X Original Android Development by ThreadRank