Re: [KERNEL][ICS][3.0.21] KernelSk8 v2.2 (12/12/12)

---

What's the difference between the two?

Sent from my LG-E970 using Tapatalk 2

Re: [KERNEL][ICS][3.0.21] KernelSk8 v2.2 (12/12/12)

---

Originally Posted by drwario

What's the difference between the two?

Sent from my LG-E970 using Tapatalk 2

I'm seeing less bugs with Android Tuner. Almost all of the tweaks I did on system tuner never stuck on boot.

Sent from my LG-E970

Is anyone turning off the other 3 cores to save battery life? Or is everyone undervolting for all four cores and just underclocking them? Just curious. I was gonna try undervolting -50 and only using one core at 900/1000 mhz.

Re: [KERNEL][ICS][3.0.21] KernelSk8 v2.2 (12/12/12)

---

Originally Posted by N12X93R

Is anyone turning off the other 3 cores to save battery life? Or is everyone undervolting for all four cores and just underclocking them? Just curious. I was gonna try undervolting -50 and only using one core at 900/1000 mhz.

I actually have no idea how to disable the cores lol. But I'd prefer leaving them alone and just underclocking @ 702MHz and adjusting the frequencies per app with SetCPU. With the conservative governor, I see deep sleep through 486MHz being used above all else.

Sent from my LG-E970

Originally Posted by Neroga

I actually have no idea how to disable the cores lol. But I'd prefer leaving them alone and just underclocking @ 702MHz and adjusting the frequencies per app with SetCPU. With the conservative governor, I see deep sleep through 486MHz being used above all else.

Sent from my LG-E970

Android Tuner will allow you to disable the cores. The snapdragon processors are the only ones that allow it, I think. Just a tid bit of info. Anyway, you can hit the arrow on the left side of the governor and it drops CPU 1-3 down. They'll either be free or online, and you can tap them to be offline which disables them. As far as I know, Android Tuner doesn't have the ability to set application profiles. You can also adjust individual frequencies of each core. The phone runs pretty smoothly with 1 CPU @ 1Ghz and ondemand. Haven't tried with the new kernel and conservative governor.

I've been using it because I can't get SetCPU to see or set voltages. Dunno what's up.

I'll try setting with SetCPU and not worrying about the cores. I know you posted about 36 hours and 6 hours of screen time, so you're doing something right, lol.

Any word on a JB kernel?

Re: [KERNEL][ICS][3.0.21] KernelSk8 v2.2 (12/12/12)

---

Idk if our hardware is capable but could you look into enabling USB otg

Sent from my LG-E970 using xda premium

Re: [KERNEL][ICS][3.0.21] KernelSk8 v2.2 (12/12/12)

---

It's not capable. There was a post from Google on Google code about it. Hardware incapable of otg due to inability to provide 5v and 550mah to the micro usb port.

Sent via LG E970 SlickROM v6

Re: [KERNEL][ICS][3.0.21] KernelSk8 v2.2 (12/12/12)

---

Originally Posted by DeathmonkeyGTX

It's not capable. There was a post from Google on Google code about it. Hardware incapable of otg due to inability to provide 5v and 550mah to the micro usb port.

Sent via LG E970 SlickROM v6

Thanks lol lg

Sent from my Nexus 4 using xda premium

Originally Posted by DeathmonkeyGTX

It's not capable. There was a post from Google on Google code about it. Hardware incapable of otg due to inability to provide 5v and 550mah to the micro usb port.

Sent via LG E970 SlickROM v6

Does this also mean no possibility of USB audio out?