Attend XDA's Second Annual Developer Conference, XDA:DevCon 2014!
5,733,293 Members 38,556 Now Online
XDA Developers Android and Mobile Development Forum

[HOW TO GUIDE i9000] ★ Flashing Rom with JVU before Custom ROM + EXTRAS ★

Tip us?
 
EwOkie
Old
(Last edited by EwOkie; 15th June 2014 at 06:54 PM.)
#1  
EwOkie's Avatar
Senior Member - OP
Thanks Meter 238
Posts: 890
Join Date: Dec 2010
Location: GLASGOW, UK
Tutorial [HOW TO GUIDE i9000] ★ Flashing Rom with JVU before Custom ROM + EXTRAS ★

I see there is a lot of people who post in here who dont know how to Flash JVU before Custom Rom with ODIN
Either they get the Red wipe error in Recovery or just arent sure on how to use it, hope this helps you...


THE TOPICS HERE ARE GUIDES ON HOW TO FIX OR USE :

Quote:
RED WIPE DBDATA ERROR
FLASH JVU 2.3.6 BEFORE CUSTOM ROM
MANUALLY INSTALL CWM
FEAMOD RECOVERY INSTALL
FIX INTERNAL STORAGE ON GT-I9000M
FAILED TO MOUNT SD CARD (E: FAILURE IN RED)
COMPUTER NOT CONNECTING TO PHONE VIA USB
UPDATE TO CYANOGENMOD 10.

AND LINKS TO WHAT YOU NEED ......


------------------------------------------------------------------------------------------------------------------------------------

Red wipe error is because the problem is with the dbdata!

Install THIS FILE in the PDA section with ODIN and dont touch anything else!

DBDATA.RFS DOWNLOAD : If you need it

Open ODIN
Click the PDA button and choose the dbdata.rfs.tar file you downloaded
Make sure Re-Partition is unchecked
Boot your SGS into DOWNLOAD MODE
To do this : Hold down the Home, Volume Down and the Power button
Connect your device to your computer with the usb cable when in Download Mode
If your device is connected Odin will recognise it
Click Start in Odin and wait
When the process is completed your device will restart
No more dbdata errors!...


------------------------------------------------------------------------------------------------------------------------------------

HOW TO GUIDE : TUTORIAL TO FLASH 2.3.6 JVU + ROOT BEFORE INSTALLING CUSTOM ROM

Samsung USB Drivers : DOWNLOAD MINE or LINK 1 : LINK 2
Needed to recognise Phone to your PC ... duh!
Reboot Computer once installed for changes to take effect

Please do not attempt anything if you don’t know completely what it is.
If any damage occurs to you or your device, I will not be held liable ... you have been warned !!


If you arent sure ... just ask

FLASHING JVU ROM WITH ODIN v1.85
Why ODIN v1.85? ... I have not had any issues with it, plain and simple!

Use ODIN with PIT File

PIT File Incase you need it : DOWNLOAD
*Using PIT File just Tick Re-Partition and put PIT File in PIT ..simple!

ODIN 1.85
ODIN FILES HERE

Turn off your phone and put it in download mode by holding VOL DOWN+MENU+POWER
Do you get the Yellow Triangle?..If so continue..if not do it again...

VIDEO LINK : HOW TO GET INTO RECOVERY / DOWNLOAD MODE


Open ODIN and select 512 .PIT, and put in your files for : CSC, PDA, MODEM
*PIT File isnt always needed to do this only if you get the 3 Red errors*

Plug in Phone with USB Cable To Computer
In ID:COM it should go yellow and you should see ADDED in the message box

Check Re-Partition option and then Cleck PIT button to select: s1_odin_20100xxx.pit file.
Click PDA button and select : CODE_I9000XXJVU_CL851880_REV03_user_low_ship.tar
Click PHONE button and select: MODEM_I9000XXJVU_REV_00_CL1092175.tar
Click CSC button and select: GT-I9000-CSC-MULTI-OXAJVU.tar

When you have all the files needed in ODIN, say JVU Rom as thats what we are using here
Click Start let it Run
Once complete you will see S logo on phone (computer will make a few noises like connect/disconnecting
Unplug the Cable to the Phone
Power Off Phone

Go into Download mode so that we can now root the Phone
Then plug in Phone

Click Reset on ODIN then in PDA put in CF-Root Kernel File for JVU to be Rooted
CF-Root is in ODIN FILES or DOWNLOAD HERE
Then Click START.. should take just a few seconds ....



Same again when you see S Logo on Phone unplug Cable
Close ODIN

Now, what I do now is go into :
Settings > SD Card and Storage > Unmount SD and Wipe that and then at the bottom Wipe Format USB Storage

Enable USB Debugging > Plug in Phone
Window should open up showing your phone Directory..
Copy over your ROM that you want
Shut Down Phone

Reboot into Recovery (Vol UP - Menu - Power)
Wipe the 4 things (probably know these... you should do)

Data / Factory Reset
Cache Partition

Go to Advanced > OK

Dalvik Cache
Battery Stats

Go Back > OK

To move Up or Down > Use the Left Side Volume Rocker Switches with Menu to OK Action

Install your Custom ROM from Zip Card that you want...

Reboot Phone when complete... DONE!

Please Check APN Settings.. for your area after you have done the following steps to give better signal
Sometimes Authentication Type is set to Default..try it at PAP and then Reboot Phone
As some ROMS APN settings are done manually for the user.. so be careful


Rom I am currently using : Blue SAUROM JWB

Hope this helps out a few people as there are quite a few posts opening up with the same problems or issues
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

Manually Install CWM (need to have Root in your phone)


Download This FILE and copy it over to /sdcard/
Power off and Boot into Recovery with 3 Button Combo
Select 'apply sdcard:update.zip' and Install (Do not Delete this file from SD Card)



------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

Deleting Cryption Meta Data Error : CWM6012-CM9-Recovery

------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

IF YOU CANT GET INTO RECOVERY (only if CWM doesnt work)...

Start ODIN
Put your Phone into Download mode and connect it via USB
(Volume Down + Home and then Power)

Download FeaModRecovery : HERE

Choose PDA and use the Downloaded File and put it in there > START
Wait for process to complete....

Exit ODIN..

Start Recovery ....

Install .. Reboot....Done

------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

IF YOU STILL RECIEVE THE
: E: Failed to mount /sdcard



Try This :

Download This First SDFormatter (Windows)

1. Download "SDFormatter" from the link above
2. Install "SDFormatter"
3. Enable "USB Debugging Mode" from Developer Options in settings.
4. Connect your tablet to PC (USB).
5. Then, tap the "USB Strage Mode" to connect to PC.
6. Backup data on INTERNAL_SD card.
7. Run "SDFormatter".
8. Specify the drive letter of INTERNAL_SD in SDFormatter and click "(Option)" button.
9. "FORMAT TYPE" select "FULL OVERWRITE" and set "FORMAT SIZE ADJUSMENT" to "ON" and click "OK"
10. Now click "FORMAT" and wait for the procedure to complete. (Can take approximately 1 hour 40 minutes)
11. After format is completed you can recopy the backup files back onto the INTERNAL_SD

..or Try and Format SD card in your Computer

If none of the above works try this : Samsung Format Utility
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

FIX INTERNAL STORAGE ON GT-I9000M (/dev/block/mmcblk0 corrupted) : SEE THIS POST

------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

COMPUTER NOT CONNECTING TO PHONE VIA USB

Windows
Remove all traces of KIES in Add/Remove.. never use KIES anyway...Reboot PC
Unplug any attached USB Devices to PC
Use Latest Samsung USB Drivers HERE and install.. Reboot System when Done
Go to Device Manager and scroll to the Bottom > Universal Serial Bus controllers
Expand all Items >



Now Uninstall one by one all the way down...
Reboot Computer when Done.
Plug in Phone... wait till it recognises Device.

Some people have also tried ...
Going into Download Mode, Connect Phone to USB.
System should install a Driver.. and voila!

Done.

DOWNLOAD THIS AND FOLLOW INSTRUCTIONS IF YOU NEED MORE HELP

Please Hit the Thanks Button if I helped you...
The Following 25 Users Say Thank You to EwOkie For This Useful Post: [ Click to Expand ]
 
EwOkie
Old
(Last edited by EwOkie; 15th June 2014 at 06:49 PM.)
#2  
EwOkie's Avatar
Senior Member - OP
Thanks Meter 238
Posts: 890
Join Date: Dec 2010
Location: GLASGOW, UK
A.I.O Rescue & Recover : LINK

Android Solutions : LINK

Samsung Updates : HERE

Latest Official I9000 and I9000M Firmwares collection : LINK

Modems : LINK

Perka's File Stash : LINK

Z4ROOT APP : HERE

3 BUTTON COMBO FIX : HERE

SECRET CODES : HERE *Use at your own Risk!*

--------------------------------------------------------------------------------------------------------------------------------------------------------------
Procedure To Update Samsung Galaxy S With Cyanogenmod 10

Device must be running latest Gingerbread 2.3.6 with ROOT to begin .....
Remove KIES completely from Phone and reboot Computer then Install latest Samsung USB Drivers then Reboot Computer...
Ensure that your phone battery is at least 85 percent charged

Cyanogenmod 10 Download
Download Google Apps (Optional)

Connect your device to PC by using the cable.
Enable mass storage mode on it.
Now transfer / copy all the 2 files to your device’s internal SD card.
Ensure that you are not keeping it in deep directory.

Now disconnect the phone from computer.
You then need to enter into recovery mode.
To do so, switch off the device completely, press & hold Volume Up button + Home Button + Power key until recovery mode appears.

After entering into recovery mode, select “install zip from sdcard” & then “choose zip from sdcard“.
Navigate to the ROM file (which you’ve transferred earlier)
Select it & press on ‘Yes‘ to continue. ROM installation process will start.

Wait for the ROM to get installed.
After ROM gets successfully installed, your phone will land in the recovery mode again.
Now select wipe data/factory reset & wipe cache partition to wipe all the data & caches from the phone memory.

The same procedure you have to do for installation Google Apps. (Just don’t do the above step i.e, don’t wipe the data after installations of Gapps).
After installaing both things, now press back button to land in recovery mode.

Select reboot system now from the Recovery mode to Restart the phone.

Usually first boot of the phone takes some time after flashing of new ROM so be patient....

Done!

Issues if you have any :

LOW STORAGE NOTIFICATION : HERE or See this LINK
If the above doesnt help TRY THIS APP
NO MOBILE DATA :
Toggle Flight mode ON/OFF
IMEI Issue :
Flash a stock version of Android for your device: GB 2.3.6 (JVU, or other) that will restore your IMEI
Then you can backup the /EFS folder.
NO 3G AVAILABLE :
The CSC you used is most likely not intended for your area.
This means that the broadband provider settings are not included and
need to be configured manually.
Go to : Settings->Wireless and Networks->Mobile Networks->Access Point Names, press the settings-button and select "New APN"
The Following 4 Users Say Thank You to EwOkie For This Useful Post: [ Click to Expand ]
 
EwOkie
Old
(Last edited by EwOkie; 13th June 2013 at 06:07 PM.)
#3  
EwOkie's Avatar
Senior Member - OP
Thanks Meter 238
Posts: 890
Join Date: Dec 2010
Location: GLASGOW, UK
Galaxy S i9000 / 9001 Disassembly & Assembly

Will add more links when I can ...
The Following User Says Thank You to EwOkie For This Useful Post: [ Click to Expand ]
 
Snowhiter
Old
#4  
Junior Member
Thanks Meter 0
Posts: 3
Join Date: Mar 2013
Fantastic...

After struggling like an armless lumberjack for what seems like a millenium - I can now relax

Major thanx are flying your way for this epic tutorial

 
EwOkie
Old
#5  
EwOkie's Avatar
Senior Member - OP
Thanks Meter 238
Posts: 890
Join Date: Dec 2010
Location: GLASGOW, UK
Quote:
Originally Posted by Snowhiter View Post
Fantastic...

After struggling like an armless lumberjack for what seems like a millenium - I can now relax

Major thanx are flying your way for this epic tutorial

Your most welcome!
The Following User Says Thank You to EwOkie For This Useful Post: [ Click to Expand ]
 
EwOkie
Old
#6  
EwOkie's Avatar
Senior Member - OP
Thanks Meter 238
Posts: 890
Join Date: Dec 2010
Location: GLASGOW, UK
Will add more when i get the time...
The Following User Says Thank You to EwOkie For This Useful Post: [ Click to Expand ]
 
EwOkie
Old
#7  
EwOkie's Avatar
Senior Member - OP
Thanks Meter 238
Posts: 890
Join Date: Dec 2010
Location: GLASGOW, UK
Added more useful Links.. should be everything you need
 
Kettlebär
Old
(Last edited by Kettlebär; 13th March 2013 at 05:54 PM.)
#8  
Kettlebär's Avatar
Member
Thanks Meter 4
Posts: 32
Join Date: May 2011
HI,
thank you for this huge How to!

I have big trouble to update my Device.

It is not possible to get in the download mode. I tried SDFormatter, it crashes every time i connect SI, Samsungs Ex. HDD Formater runs but no effects on the Phone. Odin cant flash anything (maybe of course of download modus).

What do you recommend?

Sys:
WIN XP Pro SP3, Samsung Driver, Kies
Samsung SI, Android 2.3, Vodafone (Germany) Branding, No Simlock, SIM insert (E-Puls, Provider), No Ex SD Card, original Samsung USB-Cable
Attached Thumbnails
Click image for larger version

Name:	SI_Kies.jpg
Views:	429
Size:	60.1 KB
ID:	1802266   Click image for larger version

Name:	SI_error.jpg
Views:	529
Size:	131.5 KB
ID:	1802280  
 
EwOkie
Old
(Last edited by EwOkie; 13th March 2013 at 06:33 PM.)
#9  
EwOkie's Avatar
Senior Member - OP
Thanks Meter 238
Posts: 890
Join Date: Dec 2010
Location: GLASGOW, UK
What are you trying to update to?
Using the Format tool try with USB Debugging ON

>
Uninstall Kies and reboot machine
Use my HOW TO Files ...
Install Samsung USB Drivers to install then reboot computer again..

Open ODIN and Check Re-Partition and put in PIT File
Make sure all 3 are ticked...
Also put in PDA / Modem / CSC press start when phone is connected via Download MODE

Press start....
Then just follow the rest to Root it...
Let me know if this helps


If you are wanting to go to CM 10 or JB Kies is no use anyway...no one uses KIES anymore
The Following User Says Thank You to EwOkie For This Useful Post: [ Click to Expand ]
 
Kettlebär
Old
#10  
Kettlebär's Avatar
Member
Thanks Meter 4
Posts: 32
Join Date: May 2011
Thanks a lot. I pressed volume +... That was my fault.

Now runs CM 10.1 Nighlty with Helly Bean!

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes