Originally Posted by akhil7j

I tried WinRAR and now 7-Zip too but its the same thing. Just getting the one single file with no extension.

I would guess that the factory image contains a disk image instead of individual files. That is a much faster way to do an install if you are not concerned with preserving any of the data on the devices disk.

Re: Android 4.2.2 OTA Update

---

I just got a 4.2.2 update in my stock unrooted nexs 10.. Whats the changelog between ??

Sent from my Nexus 10 using xda app-developers app

Re: Android 4.2.2 OTA Update

---

Originally Posted by pfmiller

I would guess that the factory image contains a disk image instead of individual files. That is a much faster way to do an install if you are not concerned with preserving any of the data on the devices disk.

I don't care about the data. I have backed up everything. Just wanted to make sure it will work with just one file with flash-all command.

Sent from my Nexus 10 using Tapatalk HD

---------- Post added at 11:40 PM ---------- Previous post was at 11:09 PM ----------

Nailed it.! The problem was Internet Download Manager. What I downloaded was .tgz file and IDM (i don't know why) converted it to .tar and that was the reason of not showing the contents properly.

---------- Post added 18th February 2013 at 12:02 AM ---------- Previous post was 17th February 2013 at 11:40 PM ----------

Originally Posted by styckx

So did you get your device to 4.2.2 now?

Yes, finally I am on 4.2.2 Thanks a lot for everything. Really you have helped a lot. Now the final part, Rooting. The way you described, I would like to do the same way.

Originally Posted by akhil7j

I don't care about the data. I have backed up everything. Just wanted to make sure it will work with just one file with flash-all command.

Sent from my Nexus 10 using Tapatalk HD

---------- Post added at 11:40 PM ---------- Previous post was at 11:09 PM ----------

Nailed it.! The problem was Internet Download Manager. What I downloaded was .tgz file and IDM (i don't know why) converted it to .tar and that was the reason of not showing the contents properly.

---------- Post added 18th February 2013 at 12:02 AM ---------- Previous post was 17th February 2013 at 11:40 PM ----------



Yes, finally I am on 4.2.2 Thanks a lot for everything. Really you have helped a lot. Now the final part, Rooting. The way you described, I would like to do the same way.

Congrats!

This is easy also..

First we need to download the Flashable SuperSU.
Go to this thread: http://forum.xda-developers.com/show....php?t=1538053
In the first post download the flashable zip by clicking the link following the text "CWM / TWRP / MobileODIN installable ZIP: "

Place it in a spot on your device.. Doesn't matter where.. Just as long as you know where it is at.

Download TWRP (what will be your new recovery): http://teamw.in/project/twrp2

Type in "Nexus 10" click link for it that appears, then click "Download the newest .img file from here" (you want openrecovery-twrp-2.4.x.0-manta.img whatever is the newest at the time of reading this)" on the next page.

Reboot to bootloader - Hold both Vol Up/Down + Power

Connect your device to the PC

Now we are going to instruct fastboot to flash openrecovery-twrp-2.4.x.0-manta.img to the recovery partition of your device

Open a command prompt where you have the TWRP openrecovery-twrp-2.4.x.0-manta.img file you downloaded

Type: fastboot flash recovery openrecovery-twrp-2.4.x.0-manta.img

Once you get the a-ok.. You can now use the volume key to choose "recovery" then the power button to boot into recovery.

TWRP should load.. Now you want to touch "install".. Browse to where you placed the SuperSU zip, choose it, swipe to flash and you should be done at that point and can reboot.

Originally Posted by styckx

I forgot you used that super root method which roots without unlocking the bootloader

You're going to have to unlock your bootloader

Before typing "flash-all"

type this

"fastboot oem unlock" and follow the instructions on your screen to unlock the bootloader. Then proceed with flash-all.. I updated my previous post to you including this.

I've been following you're instructions step by step to flash 4.2.2 and everything went fine except when at the end, when the device is supposed to reboot, it gets stuck on the nexus logo. Any ideas?

Originally Posted by akhil7j

Guys, pls help.! My Nexus10's bootloader was locked and i used Superboot to root. It worked like charm untill i got the OTA 4.2.2. I downloaded Rootkeeper and installed the new update.
But, I got error and the device wasn't booting up. Getting the error "No command". After some time it booted up automatically. Now it's on 4.2.1 and no OTA. It says system is up to date.
Any help?


Sent from my GT-I9100 using Tapatalk 2

Delete data from google framework services (in settings all applications) and then go to settings - info about tablet - update, repeat this untill ota shows up.

Originally Posted by CaramelBoogers

I've been following you're instructions step by step to flash 4.2.2 and everything went fine except when at the end, when the device is supposed to reboot, it gets stuck on the nexus logo. Any ideas?

How long did you let it wait?

Originally Posted by styckx

How long did you let it wait?

like 20 to 30 minutes

Originally Posted by CaramelBoogers

like 20 to 30 minutes

Interesting.. Doesn't make much sense and never heard of that ever happening before. Try holding down power to turn it off and power it back on.. Can you boot into the bootloader still.

Originally Posted by styckx

Interesting.. Doesn't make much sense and never heard of that ever happening before. Try holding down power to turn it off and power it back on.. Can you boot into the bootloader still.

yeah it goes into the bootloader fine if i hold all the keys while rebooting

edit: it won't go into recovery though. It gives me the red triangle