[CM10.1][Jellybro] D2ATT Nightly Kangs

DarthDerron · 23rd February 2013, 01:27 AM

Quote:

Originally Posted by theyurtingyeti

Alright... I'm feeling like the "needy" guy in the thread right now, but the last round of clean installs has been irritating at best.

So I think I noticed that my SDCard was storage/emulated/0/0/0 so I backed up and wiped the internal SDCard and reflashed everything. During the setup I messed up how TiBu was restoring and my UIDs were now inconsistent and like half my backups weren't working right (my fault).

I then reformatted /data and rebooted (I did not reflash anything)... well, it started me at the beginning again, but I noticed that SDCard was now storage/emulated/0/0 (instead of storage/emulated/0 when I reformatted the internal SDCard).

Am I going to have to format the internal card every time I want/need to factory reset, or am I missing something here??

I understand these are experimental builds, so if that's what I have to do, I can... I just don't want to be doing a lot of extra stuff if there's an easy fix (or I'm doing something wrong).

Thanks for the additional help!

(FWIW I'm currently on the 0214 build)

Update your recovery to the latest. Should fix all the 0 emulated folders.

theyurtingyeti · 23rd February 2013, 03:12 AM

Quote:

Originally Posted by DarthDerron

Update your recovery to the latest. Should fix all the 0 emulated folders.

That's far better than the other alternative. Thanks!

djn541 · 23rd February 2013, 03:51 AM

Re: [CM10.1][Jellybro] D2ATT Nightly Kangs

Quote:

Originally Posted by theyurtingyeti

Alright... I'm feeling like the "needy" guy in the thread right now, but the last round of clean installs has been irritating at best.

So I think I noticed that my SDCard was storage/emulated/0/0/0 so I backed up and wiped the internal SDCard and reflashed everything. During the setup I messed up how TiBu was restoring and my UIDs were now inconsistent and like half my backups weren't working right (my fault).

I then reformatted /data and rebooted (I did not reflash anything)... well, it started me at the beginning again, but I noticed that SDCard was now storage/emulated/0/0 (instead of storage/emulated/0 when I reformatted the internal SDCard).

Am I going to have to format the internal card every time I want/need to factory reset, or am I missing something here??

I understand these are experimental builds, so if that's what I have to do, I can... I just don't want to be doing a lot of extra stuff if there's an easy fix (or I'm doing something wrong).

Thanks for the additional help!

(FWIW I'm currently on the 0214 build)

You should only have to format everything once. Unless you're going back and forth between 4.1 and 4.2

Sent from wherever the hell I am!

theyurtingyeti · 23rd February 2013, 03:58 AM

Re: [CM10.1][Jellybro] D2ATT Nightly Kangs

Quote:

Originally Posted by djn541

You should only have to format everything once. Unless you're going back and forth between 4.1 and 4.2

Sent from wherever the hell I am!

Very true! In hindsight I think I screwed something up going from 4.2.1 to 4.2.2 and back... Prior to that it had been months since my last reset.

Sent from my SAMSUNG-SGH-I747 using xda app-developers app

gundamboy · 23rd February 2013, 11:53 PM

Curious question, what Kernel is everybody pairing up with this ROM? I've been using Task's but it caused bootloops.
Recently I switched to Leankernel, but its a lagfest at times.. I feel like having no additional kernel seems to be the sweet spot for now, but I was just curious about everyone else's thoughts on this.

Thanks in advance!

Heisenberg420 · 23rd February 2013, 11:54 PM

Re: [CM10.1][Jellybro] D2ATT Nightly Kangs

Quote:

Originally Posted by gundamboy

Curious question, what Kernel is everybody pairing up with this ROM? I've been using Task's but it caused bootloops.
Recently I switched to Leankernel, but its a lagfest at times.. I feel like having no additional kernel seems to be the sweet spot for now, but I was just curious about everyone else's thoughts on this.

Thanks in advance!

BMS is good

rani9990 · 24th February 2013, 06:27 PM

Re: [CM10.1][Jellybro] D2ATT Nightly Kangs

Quote:

Originally Posted by gundamboy

Curious question, what Kernel is everybody pairing up with this ROM? I've been using Task's but it caused bootloops.
Recently I switched to Leankernel, but its a lagfest at times.. I feel like having no additional kernel seems to be the sweet spot for now, but I was just curious about everyone else's thoughts on this.

Thanks in advance!

How about KT's? That's the best kernel IMHO.

Sent from my SAMSUNG-SGH-I747 using Tapatalk 2

djn541 · 25th February 2013, 01:41 PM

Hey guys. Sorry been out for a bit. It was moving weekend. I should have my rig set up tonight and hopefully have a build tonight or tomorrow! Stay Tuned!

gundamboy · 25th February 2013, 04:20 PM

Re: [CM10.1][Jellybro] D2ATT Nightly Kangs

Agreed, I'm using KT's kernel build now and it's great!! Far and stable, the undervolting options is definitely a plus for me

10/10 this combo is a match made in heaven.

Djn take your time bro! We're lucky to even have you kanging for us

Sent from my SAMSUNG-SGH-I747 using xda premium

matrixzone · 25th February 2013, 06:40 PM

Re: [CM10.1][Jellybro] D2ATT Nightly Kangs

Quote:

Originally Posted by gundamboy

Curious question, what Kernel is everybody pairing up with this ROM? I've been using Task's but it caused bootloops.
Recently I switched to Leankernel, but its a lagfest at times.. I feel like having no additional kernel seems to be the sweet spot for now, but I was just curious about everyone else's thoughts on this.

Thanks in advance!

Stock one rocks

Sent from my SAMSUNG-SGH-I747 using xda app-developers app