Originally Posted by craskman

Hi,

I tried compile myself, all good but I softbrick my mini now i have to recover from the backup.

I would like to ask, if you could add this line in the config..

CONFIG_CPU_FREQ_GOV_INTERACTIVE=y

The driver is there and all seems good, we just need this line to have interactive gov available.

Thanks,
CrK

Neldar,

I dont want to make this thread a kernel howto'ish kind, but have you sync'ed everything on git repos?
I have compiled successfully without any change and I keep softbricking my mini, I was wondering if there is a smallish detail missing.

Thanks,
CrK

Originally Posted by neldar

Ok, good to know.
So any kernel dev for the i8190 may just use the goldennfc_config.



Do the sms and call apps activate the screen while the notification is issued?
If the screen is on, then that will prevent the led notification from working.

And there is a new kernel version v3:

• fixed led handling, blinking fix

edit: please report if the bug with the permanently activated leds is also fixed.

Hi neldar,

I got a bootable Kernel for i8190, its still in testing stages.
I will be releasing it very soon, its a direct port of my i9070 Kernel....
Can I use your BLN patches in my Kernel if you don't mind?

Silly question, but has it Deep Sleep support? My processor runs allways with 200 MHz. I have installed V2 and Benzrom xxama2 V3.

Originally Posted by tux95

Silly question, but has it Deep Sleep support? My processor runs allways with 200 MHz. I have installed V2 and Benzrom xxama2 V3.

I'm also experiencing the lack of deep sleep, already disabled fast dormancy and running BBS to see if there's a wakelock but still nothing

Originally Posted by Dani26

In v3 still the bug that the soft keys doesnt turn off. When you turn off the screen with the soft keys on, the soft keys still on, but when you turn off the screen with soft keys off, all works perfect.

Enviado desde mi GT-I8190 usando Tapatalk 2

How did you enable the soft key leds? Just by touching them?

Originally Posted by craskman

Neldar,

I dont want to make this thread a kernel howto'ish kind, but have you sync'ed everything on git repos?
I have compiled successfully without any change and I keep softbricking my mini, I was wondering if there is a smallish detail missing.

Thanks,
CrK

How did you setup the build environment and build the kernel?
Please post your resulting boot.img.

Originally Posted by Adi_Pat

Hi neldar,

I got a bootable Kernel for i8190, its still in testing stages.
I will be releasing it very soon, its a direct port of my i9070 Kernel....
Can I use your BLN patches in my Kernel if you don't mind?

Yes, of course, but it is still not finished. There is still the bug with the permanently enabled lights.

Originally Posted by tux95

Silly question, but has it Deep Sleep support? My processor runs allways with 200 MHz. I have installed V2 and Benzrom xxama2 V3.

Are you referring to the following config lines?

CONFIG_DBX500_CPUIDLE_DEEPEST_STATE=3
# CONFIG_DBX500_CPUIDLE_APDEEPIDLE is not set
CONFIG_DBX500_CPUIDLE_DEBUG=y

Originally Posted by neldar

Are you referring to the following config lines?

CONFIG_DBX500_CPUIDLE_DEEPEST_STATE=3
# CONFIG_DBX500_CPUIDLE_APDEEPIDLE is not set
CONFIG_DBX500_CPUIDLE_DEBUG=y

Now is just wonder, because CPU Spy says the processor is allways at 200 MHz and in BBS i cant find any "unnormal" wakelocks

Originally Posted by tux95

Now is just wonder, because CPU Spy says the processor is allways at 200 MHz and in BBS i cant find any "unnormal" wakelocks

it´s same for me

Originally Posted by neldar

How did you setup the build environment and build the kernel?
Please post your resulting boot.img.

Thanks for the support, I have attached the boot.img i am getting.

I was wondering if I am using the wrong toolchain, have tried these 2 (both part of ubuntu 12.04 repos)

arm-linux-gnueabi-gcc (Ubuntu/Linaro 4.6.3-1ubuntu5) 4.6.3
arm-linux-gnueabi-gcc-4.7 (Ubuntu/Linaro 4.7.1-5ubuntu1~ppa1) 4.7.1

btw, I use CWM recovery to flash it (zip signed).

Thanks a ton,
CrK

Originally Posted by craskman

Thanks for the support, I have attached the boot.img i am getting.

I was wondering if I am using the wrong toolchain, have tried these 2 (both part of ubuntu 12.04 repos)

arm-linux-gnueabi-gcc (Ubuntu/Linaro 4.6.3-1ubuntu5) 4.6.3
arm-linux-gnueabi-gcc-4.7 (Ubuntu/Linaro 4.7.1-5ubuntu1~ppa1) 4.7.1

btw, I use CWM recovery to flash it (zip signed).

Thanks a ton,
CrK

edit: just noticed your initramfs does not contain some empty folders and the links are not properly set.
The git repo of my initramfs is not complete.

edit2: repo is now complete, but you should check why those symlinks are not correctly set in your initramfs.

Originally Posted by neldar

edit: just noticed your initramfs does not contain some empty folders and the links are not properly set.
The git repo of my initramfs is not complete.

edit2: repo is now complete, but you should check why those symlinks are not correctly set in your initramfs.

Hi, Thanks again. Indeed. Actually I could have spitted and look inside, has been awhile since I played with kernels.
I re-sync and I have created the symlinks manually, there were 4.

I only had time to do a quick test but no success yet. Next I will try my zimage with your initramfs and vice-versa.
Then I will know for sire if the issue is the ramdisk or the zimage. (our initramfs looks pretty the same at the moment)

The only think I see happening when i turn on the phone is the leds on he buttons flickering for moments, but then nothing happen.

If something comes up in your head what could be missing, let me know.
Thx,
CrK