Re: [Team Kernelizers] {how to} Ktoonsnative governor and I/O tweaks

---

Originally Posted by galaxys3man30

Congratz buddy thx for all your hard work
:thumbup::beer::thumbup::beer::thumbup::beer::thum bup::beer::thumbup::thumbup::beer::thu mbup::beer::thumbup::beer:

President of {Team Kernelizers}
Im Gman and I approve this message

Thank you good sir!

Originally Posted by UkilledKenny

Wouldn't it be better to just get a more reliable kernel? One in which you didn't have to delete, edit, etc?

Ummm sir, this way to the door ----->

Lol

Its not on the side of the kernel. Roms have scripts that interfer with out tweaks. If you dont want to deal with all of that I would say to stick to a stock ROM.

And how boring would your phone be without being able to customize it.

Sent from my SPH-L710 using Tapatalk 2

Re: [Team Kernelizers] {how to} Ktoonsnative governor and I/O tweaks

---

Originally Posted by castle_bravo

And that's mentioned in the first few lines of the second op... like people have suggested,

To save clutter here's the link, it's like 5 pages back.

http://forum.xda-developers.com/show...php?p=38339063

I would suggest either noop or bfq, Zen with the newly recommended tweaks also, don't use row if looking for a record run.


Edit: 10 pages sorry, it feels like I posted those yesterday lol

Sent from my SPH-L710 using xda app-developers app

Checked around 10 pages ago. All I found is the stuff I already tried. So far nothing working. And deleted that 70 script thing. No change. Unfortunately Ktoon seems to be the best compared to agots and stock. Idk how I'd get good life on stock kernel

Sent from my SPH-L710 using xda app-developers app

Originally Posted by ReapersDeath

Checked around 10 pages ago. All I found is the stuff I already tried. So far nothing working

Sent from my SPH-L710 using xda app-developers app

Did you remove the "70cputweakMODv2" file from the init.d folder?

Re: [Team Kernelizers] {how to} Ktoonsnative governor and I/O tweaks

---

Originally Posted by clankfu

Did you remove the "70cputweakMODv2" file from the init.d folder?

Yes. No change

Sent from my SPH-L710 using xda app-developers app

Originally Posted by ReapersDeath

Yes. No change

Sent from my SPH-L710 using xda app-developers app

And you tried this workaround?

Originally Posted by mw86

The list in order i mentioned on rom toolbox works it really works.
Short version
-Save backup in ktweaker wkth apply immediately at boot
-force stop, clear rom toolbox data
-enter rom toolbox, kernel tweaks, governor tunables, press nothing here but apply at boot
-back out
Reboot phone normally

Watch for super user messages
-ktweaker and all will apply
-ktweaker message says applied at boot
-cpu load goes to idle
-5-15secs later rom toolbox says settings applied
-enter ktweaker no message should be shown.

This has worked since November for me.

-it wont work if up, up htpg, down, down htpg are not different values atleast 1 away from each other. Plus up and up never can be below any down or down thresholds and opposite down thresholds can never be above the up thresholds.

Stick to this type of restrictions on tunables and if having trouble on the settings mismatch the rom toolbox method will work.

Castlebravo interesting on the files you mentioned. You can add a line or two to initd file any there added in and echo the values to the files at boot you want. You can use the initd in OP as a template, replace the values you want and change the file fplder location and the initd can be used as a template for whatever your needs were like this. Using the echo command would make those files say the value you want when the initd script launched at boot.

Re: [Team Kernelizers] {how to} Ktoonsnative governor and I/O tweaks

---

Ya, tried that. I could of done it somewhat wrong because it's a little confusing XD as I said in a post earlier, the rom toolbox method just gave me a lot of lag

Sent from my SPH-L710 using xda app-developers app

Originally Posted by ReapersDeath

Ya, tried that. I could of done it somewhat wrong because it's a little confusing XD as I said in a post earlier, the rom toolbox method just gave me a lot of lag

Sent from my SPH-L710 using xda app-developers app

Strange. That's what got it to stick for me and I haven't experienced any lag.

Re: [Team Kernelizers] {how to} Ktoonsnative governor and I/O tweaks

---

Originally Posted by clankfu

Strange. That's what got it to stick for me and I haven't experienced any lag.

Ok so following that, how do I customize my settings? It says make a backup but doesn't say when to restore. Or if I have to duplicate ktoon with rom toolbox

Edit. Got it to stick. But if I was to make any changes, would I have to do anything in rom toolbox?


And how do you guys keep up on the newest "tweaks". All I see is the first page and then 200 pages of clutter and occasional new build.

I'm just looking for a set up that will give me some better performance and battery life.. I've been getting 3 hours screen on max

Sent from my SPH-L710 using xda app-developers app

Originally Posted by ReapersDeath

Ok so following that, how do I customize my settings? It says make a backup but doesn't say when to restore. Or if I have to duplicate ktoon with rom toolbox

Sent from my SPH-L710 using xda app-developers app

1) Go into KTweaker and apply your settings
2) Also in KTweaker, "set on boot immediately" and check "lock frequencies"
3) Save a backup in KTweaker
4) Go in to app manager --> ROM Toolbox --> force stop and clear data
5) Go into ROM Toolbox --> Performance --> kernel tweaks --> governor and press nothing but apply at boot
6) Back out
7) Reboot
8) Watch for Super User messages
- KTweaker and all will apply
- KTweaker message says applied at boot
- ROM Toolbox says settings applied
- enter KTweaker and no message should be shown and your settings should stick

Re: [Team Kernelizers] {how to} Ktoonsnative governor and I/O tweaks

---

Originally Posted by ReapersDeath

Edit. Got it to stick. But if I was to make any changes, would I have to do anything in rom toolbox?

Sent from my SPH-L710 using xda app-developers app

If you make changes no need to do anything in Rom toolbox, as long as you have it to "set at boot" in Rom tool box, everything you change in ktweaker will also change on Rom tool box, hope that makes things clear on that.

 

As for finding optimal settings, that's all about how you use your phone... ie: things syncing, widgets running, etc... personally, I use row and interactive and can get 24 hours with 4½ screen on time, but I sync absolutely nothing because I don't need to, I run no widgets except the stock tw weather widget, but I don't let it refresh on its own, if I need roti check the weather, I do it myself...

Wakelocks are also a killer for battery life, you can use the guide in my Sig to figure that one out because wakelocks will be different depending on the apps and settings you use... location settings is a battery drainer, turn it off if you don't need it, Google now also, huge battery drainer... biggest thing, if you don't need data, turn it off, even sitting idle with nothing syncing the radio still uses battery (I personally only turn data off at night because my IMO app has to remain functioning all day and needs data to be connected)

Bottom line, battery life is all about the way you use your phone...


Sprint GS3 FAQ THREAD