Re: [ROM][24 Feb]★★CleanROM Inheritance 3.4.1 | JB 10.4.4.25 | ODEX/DEODEX | 4 Kernel

---

Just flashed 3.4.1 will report back soon :P

Sent from my ASUS Transformer Pad TF700T using Tapatalk HD

Originally Posted by bjmarler

Several hours later of heavy, non-stop use... it's still working GREAT!!!

great yes!

with wich combination ?
kernel ecc.ecc.

thanks

Re: [ROM][24 Feb]★★CleanROM Inheritance 3.4.1 | JB 10.4.4.25 | ODEX/DEODEX | 4 Kernel

---

Originally Posted by marci4na

great yes!

with wich combination ?
kernel ecc.ecc.

thanks

I have similar results.

Cleanrom 3.4.1 with data2sd hungsbuah 1.9ghz in interactive.



Enviado desde mi Galaxy Nexus

Where do I find the tweaking options for the 1.9Ghz kernal installed with the ROM? Also is Data@Sd included with the ROM ?

Re: [ROM][24 Feb]★★CleanROM Inheritance 3.4.1 | JB 10.4.4.25 | ODEX/DEODEX | 4 Kernel

---

Originally Posted by Quozl

Where do I find the tweaking options for the 1.9Ghz kernal installed with the ROM? Also is Data@Sd included with the ROM ?

You need hundsbuah kernel to run at 1.9, and if you want to be in data2sd follow the lines explained in data2sd post you can find the specifical hundsbuah 1.9 ghz data2sd mod in his post

Enviado desde mi Galaxy Nexus

Hi,
what kernel would you suggest for smoothest browsing and saving battery?

Re: [ROM][24 Feb]★★CleanROM Inheritance 3.4.1 | JB 10.4.4.25 | ODEX/DEODEX | 4 Kernel

---

Originally Posted by SurferLTU

Hi,
what kernel would you suggest for smoothest browsing and saving battery?

I would recommend the stock _that kernel. I've tested numerous kernels and I always find that the stock kernel seems to provide the best balance of performance, smoothness and battery life.

To be perfectly honest, I still think the stock kernel actually performs the best of them all, at least on my device.

Just my opinion though! YMMV.

Also - @sbdags kernel installer makes it very quick and easy to switch kernels, so just test them yourself (no need to wipe cache and/or dalvik cache when switching kernels). One thing to note is that it may take up to 30 minutes or so for the ROM to "settle", especially if you have a lot of media files on your SD card. So, make sure you are aware of that - each kernel may run slow for a while after it first boots...

Sent from my ASUS Transformer Pad TF700T using Tapatalk 2

Sbdags,
thank you very much for so (as always) exciting ROM!!!
One question-i have a mSD 64 Gb that is from beginning formatted with extFAT.
What is suggestion for better performance and reliability -just leave it in extFAT or format to FAT32?
Has anyone already expirience with that?
Thanks all,
Val

Originally Posted by Rickymax

You need hundsbuah kernel to run at 1.9, and if you want to be in data2sd follow the lines explained in data2sd post you can find the specifical hundsbuah 1.9 ghz data2sd mod in his post

Enviado desde mi Galaxy Nexus

Is this the 1.5 - 1.9 kernel that I selected in the ROM or is it the stand alone version of the hundsbuah kernel?

Cheers Q

Re: [ROM][24 Feb]★★CleanROM Inheritance 3.4.1 | JB 10.4.4.25 | ODEX/DEODEX | 4 Kernel

---

Originally Posted by Quozl

Is this the 1.5 - 1.9 kernel that I selected in the ROM or is it the stand alone version of the hundsbuah kernel?

Cheers Q

There is only one 1.9kernel and it's hundsbuah. You can install this kernel using stand alone or in the rom.(if sdbags already merged it).
Edit, yes it;s in 3.4.1 rom installer.

Sent from my ASUS Transformer Pad TF700T using xda premium