Telcel Razr I liberate and use in another company

Search This thread
Sorry for my bad english

Translated by Google Translate

For my use Iusacell Network, I have preferences to Custom Roms or Cooked (still there for the Razr I) and therefore I did the following:

1. - Unlock Bootloader (Motorola Official Site)

2. - Install CWMR (Clock Work Mod Recovery) and made a backup of the system is Telcel see post of http://xdaforums.com/showthread.php?t=2166646

3. - Download and install RSD Lite 6.1.4 http://www.mediafire.com/?yw9dh89jtqii71e

4. - Download and install a firmware using RSD lite 6.1.4, I chose Brazil Retail (ICS and is used to put a new SIM to exit the menu to enter the unlock code SIM) (It should "just unzip" by rsd lite in the browser and edit the XML file and delete this line <step operation="getvar" var="max-download-size" />
leaves the file saving changes in RSD Lite is sought file you edited and select to trigger the flash, if you choose a firmware starting with CFC this line does not appear, I not flash CFCs.

5. - I got the unlock code by IMEI (unlock code generated must be 16 digits) in http://www.unlockunit.com/es/liberar-motorola/motorola-razr-i-xt890, I want to clarify that the total amount was paid 19.9 USD as the price of 13.9 is on your list of search operator Telcel and when they do not, so it has to build and cost me, 6 USD I made my transaction via PayPal but you can pay online (takes 5 business days)

6. - I put the SIM of Iusacell, asked me the code, I introduced and ready, Razr I working with Iusacell (the Razr I in the HSPA+ Iusacell network is 4G)

Note: You can start from step 3, and not supporting anything and just install a new firmware for you to quit the input menu unlock code SIM: good:

If you unlock the bootloader you can follow this XDA thread http://xdaforums.com/showthread.php?t=1936512 ​​very careful with the steps, you are to read

Spanish

Thanks
Motorola
Turl1
Mattlgroff
xda-developers forum


I do not take responsibility for what happen to your phone, just inform you that I, to release my phone and I have some experience in these matters, because my previous phones "Wildfire". :good:
 
Last edited:
  • Like
Reactions: bighleo114312

jeremyngd

New member
Sep 24, 2012
3
1
Hola

que onda amigo estoy en el mismo punto lamentablemente compre el codigo en otro lugar y me dieron 3 diferentes fallaron so ahora lo compre en unlockuni y estoy a la espera cuanto tiempo se tardaron en enviarte tu codigo? saludos
 

tufoz

Senior Member
May 15, 2009
236
4
Sorry for my bad english

Translated by Google Translate

For my use Iusacell Network, I have preferences to Custom Roms or Cooked (still there for the Razr I) and therefore I did the following:

1. - Unlock Bootloader (Motorola Official Site)

2. - Install CWMR (Clock Work Mod Recovery) and made a backup of the system is Telcel see post of http://xdaforums.com/showthread.php?t=1974097

3. - Download and install RSD Lite 6.1.4 http://www.mediafire.com/?yw9dh89jtqii71e

4. - Download and install a firmware using RSD lite 6.1.4, I chose Brazil Retail (ICS and is used to put a new SIM to exit the menu to enter the unlock code SIM) (It should "just unzip" by rsd lite in the browser and edit the XML file and delete this line <step operation="getvar" var="max-download-size" />
leaves the file saving changes in RSD Lite is sought file you edited and select to trigger the flash, if you choose a firmware starting with CFC this line does not appear, I not flash CFCs.

5. - I got the unlock code by IMEI (unlock code generated must be 16 digits) in http://www.unlockunit.com/es/liberar-motorola/motorola-razr-i-xt890, I want to clarify that the total amount was paid 19.9 USD as the price of 13.9 is on your list of search operator Telcel and when they do not, so it has to build and cost me, 6 USD I made my transaction via PayPal but you can pay online (takes 5 business days)

6. - I put the SIM of Iusacell, asked me the code, I introduced and ready, Razr I working with Iusacell (the Razr I in the HSPA+ Iusacell network is 4G)

Note: You can start from step 3, and not supporting anything and just install a new firmware for you to quit the input menu unlock code SIM: good:

If you unlock the bootloader you can follow this XDA thread http://xdaforums.com/showthread.php?t=1936512 ​​very careful with the steps, you are to read

Spanish

Thanks
Motorola
Turl1
Mattlgroff
xda-developers forum


I do not take responsibility for what happen to your phone, just inform you that I, to release my phone and I have some experience in these matters, because my previous phones "Wildfire". :good:
I had the same problem.. 2 codes by cellunlocker.net but none working.. how can i do?
 
I had the same problem.. 2 codes by cellunlocker.net but none working.. how can i do?

codes provided by unlockunit don't work :(
I can retry before the end of the week..what rom do you suggest to flash?

Almost do not understand what you write (and I quote above) has purchased 4 codes and none has worked for you ......... so far he had not seen it written, but at least many have been served and have their Telcel RAZR I bought running in Iusacell, could not even remotely help you with your case, which is very rare ...... but I would recommend requesting a refund of your money.

Luck and greetings :thumbup:

Sorry for my bad English

Enviado desde mi XT890
 

Top Liked Posts

  • There are no posts matching your filters.
  • 1
    Sorry for my bad english

    Translated by Google Translate

    For my use Iusacell Network, I have preferences to Custom Roms or Cooked (still there for the Razr I) and therefore I did the following:

    1. - Unlock Bootloader (Motorola Official Site)

    2. - Install CWMR (Clock Work Mod Recovery) and made a backup of the system is Telcel see post of http://xdaforums.com/showthread.php?t=2166646

    3. - Download and install RSD Lite 6.1.4 http://www.mediafire.com/?yw9dh89jtqii71e

    4. - Download and install a firmware using RSD lite 6.1.4, I chose Brazil Retail (ICS and is used to put a new SIM to exit the menu to enter the unlock code SIM) (It should "just unzip" by rsd lite in the browser and edit the XML file and delete this line <step operation="getvar" var="max-download-size" />
    leaves the file saving changes in RSD Lite is sought file you edited and select to trigger the flash, if you choose a firmware starting with CFC this line does not appear, I not flash CFCs.

    5. - I got the unlock code by IMEI (unlock code generated must be 16 digits) in http://www.unlockunit.com/es/liberar-motorola/motorola-razr-i-xt890, I want to clarify that the total amount was paid 19.9 USD as the price of 13.9 is on your list of search operator Telcel and when they do not, so it has to build and cost me, 6 USD I made my transaction via PayPal but you can pay online (takes 5 business days)

    6. - I put the SIM of Iusacell, asked me the code, I introduced and ready, Razr I working with Iusacell (the Razr I in the HSPA+ Iusacell network is 4G)

    Note: You can start from step 3, and not supporting anything and just install a new firmware for you to quit the input menu unlock code SIM: good:

    If you unlock the bootloader you can follow this XDA thread http://xdaforums.com/showthread.php?t=1936512 ​​very careful with the steps, you are to read

    Spanish

    Thanks
    Motorola
    Turl1
    Mattlgroff
    xda-developers forum


    I do not take responsibility for what happen to your phone, just inform you that I, to release my phone and I have some experience in these matters, because my previous phones "Wildfire". :good: