5,595,000 Members 39,635 Now Online
XDA Developers Android and Mobile Development Forum

[Tutorial] How to Unbrick/Flash Official Firmware on Samsung Galaxy Ace S5830i Using

Tip us?
 
Deepak sai
Old
(Last edited by Deepak sai; 18th May 2013 at 05:28 AM.)
#1  
Deepak sai's Avatar
Member - OP
Thanks Meter 43
Posts: 66
Join Date: Feb 2013
Location: Hyderabad
Default [Tutorial] How to Unbrick/Flash Official Firmware on Samsung Galaxy Ace S5830i Using

How to Unbrick/Flash
Official Firmware on
Samsung Galaxy Ace
S5830i Using Odin



First You Need

Latest Version of ODIN [ TRY TO GOOGLE IT]


Bricked Samsung Galaxy Ace S5830I

USB Cable


YOU CAN DOWNLOAD YOUR COUNTRY FRIMWARE HEAR

http://samsung-updates.com/device/?id=GT-S5830i










Samsung Galaxy Ace S5830i is one
of the most popular and best-selling
low-end Android smartphones with
nice features. The phone was
released with Android 2.2 (Froyo)
and was later upgraded to version
2.3.6 Gingerbread. Modest specs of
the this handset make it unqualified
to be updated to Ice Cream
Sandwich or Jelly Bean but there are
qualified and skilled developers out
there who have successfully, but not
buglessly, developed custom ROMs
and mods to give you some ICS and
JB flavor.
If you have recently tried a custom
ROM and now want to go back to
original Gingerbread ROM, you can
install it manually. Sometimes the
device does not start properly
because it is caught in a bootloop
and you can only see the Samsung
logo with your device name. In such
a situation, installing the official
ROM is the best solution.


Getting Prepared
Download appropriate firmware
file from above and extract the
zip to your desktop computer.
Download Odin3 1.84 tool for
multi-file installation (extract
zip): Odin_with_pit_S5830I.zip
Download Odin3 v3.07 for
single file installation (extract
zip): Odin3-v3.07.zip
Download and install Samsung
USB Drivers on your PC:
Download
Charge your phone and backup
all essential data such as
contacts, messages, apps using
These Free Apps .
Open phone Settings>
Applications> Development
and enable USB Debugging.




Installing Stock Gingerbread
Firmware
Turn off you phone and boot it into
Download mode: hold down
the Volume Down + Volume
Up buttons, then long press
the Power key till the your phone’s
screen turns up and you see the
Download mode screen. Now follow
the steps that applies your case.
Single File Installation:
1. If you are going to do a single
file installation, launch Odin3
v3.07.exe as administrator and
connect the phone to computer
via USB cable.
2. When the device connections is
established successfully the
ID:COM port at Odin 3.07 turns
blue.
3. Click on PDA button and select
the firmware file with .tar.md5
extension.
4. Do not mess with any other
thing in Odin and click the
“Start” button.
Multi-file Installation:
1. In case you choose to install a
multi-file firmware, run Odin3
1.84.exe as administrator and
connect your phone to PC while
it is in Download mode.
2. When the device is connected,
the ID:COM will turn yellow.
3. Make sure that “Re-Partition”,
“Auto Reboot” and “F Reset
Time” options are checked on
Odin.
4. Now click on PIT button and
select the .pit
file: cooperve_0623.pit
5. Then click the PDA button and
select the file with CODE in its
name.
6. Click Phone and select the file
with MODEM in its name.
7. Click on CSC and select the file
with CSC in its name.
8. Finally hit the “Start” button on
Odin and let the installation
finish.
The installation will take just a few
minutes and when it is done your
phone will reboot automatically. The
first boot usually takes longer time
so a little patience is required. When
the phone boots, check the firmware
version from Settings> About on
your Galaxy Ace S5830i. Enjoy the
new firmware. Cheers! :beer:

Sent from my GT-S5830i using xda app-developers app
The Following 14 Users Say Thank You to Deepak sai For This Useful Post: [ Click to Expand ]
 
srt99
Old
#2  
srt99's Avatar
Senior Member
Thanks Meter 569
Posts: 946
Join Date: Dec 2012
Location: Ahmedabad
we already have unbrick tutorial..
any help is appriciated...but please search before u post...
there is already a guide in general section stickies...


Sent from my GT-S5830i using xda app-developers app
The Following User Says Thank You to srt99 For This Useful Post: [ Click to Expand ]
 
brijeshep
Old
#3  
brijeshep's Avatar
Recognized Contributor
Thanks Meter 1638
Posts: 563
Join Date: Aug 2012
Location: ►KERALA◄
Anyway, good tutorial.
Include Odin download links and some screenshots, will make it better.

Sent from my GT-S5830i using xda app-developers app



♫♪☼☻►◄ All My Works on XDA ►◄☻☼♪♫
Devices: Samsung Galaxy Ace (GT-S5830), Samsung Galaxy Pocket (GT-S5300),
YXTEL G926, Micromax Canvas 2+,Samsung Galaxy Ace (GT-S5830i)
The Following 3 Users Say Thank You to brijeshep For This Useful Post: [ Click to Expand ]
 
Roboburr
Old
#4  
Roboburr's Avatar
Junior Member
Thanks Meter 1
Posts: 6
Join Date: Aug 2013
Quote:
Originally Posted by brijeshep View Post
Anyway, good tutorial.
Include Odin download links and some screenshots, will make it better.

Sent from my GT-S5830i using xda app-developers app
Had a bricked bootlooped s5830i laying somewhere, it is fixed now! thanks!
 
FirsThink2000
Old
#5  
Junior Member
Thanks Meter 0
Posts: 6
Join Date: Sep 2013
Default Cant unbrick

Hi, I'm a newbie. When i finally unbrick, phone again restart stock logo SAMSUNG and again restart fix? pls ((
 
Hitesh2626
Old
#6  
Hitesh2626's Avatar
Recognized Contributor
Thanks Meter 1070
Posts: 1,282
Join Date: Feb 2013
Location: ☆◢Mumbai◣☆
Quote:
Originally Posted by FirsThink2000 View Post
Hi, I'm a newbie. When i finally unbrick, phone again restart stock logo SAMSUNG and again restart fix? pls ((
Go to stock recovery and do wipe data/cache and then again flash stock rom via odin it will start...

Sent from my Ace-i
 
FirsThink2000
Old
#7  
Junior Member
Thanks Meter 0
Posts: 6
Join Date: Sep 2013
Quote:
Originally Posted by Hitesh2626 View Post
Go to stock recovery and do wipe data/cache and then again flash stock rom via odin it will start...

Sent from my Ace-i
Hi! I was try it, and its works!!! TNX A LOT!!!!
 
Android-fany
Old
#8  
Android-fany's Avatar
Senior Member
Thanks Meter 696
Posts: 1,480
Join Date: Nov 2012
Location: localhost
Quote:
Originally Posted by FirsThink2000 View Post
Hi! I was try it, and its works!!! TNX A LOT!!!!
Don't just say thanks, hit his thanks button!
The Following User Says Thank You to Android-fany For This Useful Post: [ Click to Expand ]
 
faniraja95
Old
#9  
Junior Member
Thanks Meter 0
Posts: 1
Join Date: Sep 2013
odin3 1.84 stuck at <ID:0/005>setupconnection...
 
Flash013
Old
#10  
Junior Member
Thanks Meter 0
Posts: 5
Join Date: Oct 2013
Default not working

It still isn't working .i had tried single firmware and my phone is still bootlooping!!

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes