Originally Posted by ansonlarken
I bought a tab 3 8.0 recently and which after it got updated through wifi touch was not responding as it should later I restared and it was back to normal. Later after few hours the problem started so I rebooted into recovery to clear the cache it displayed error. The tab works fine sometimes but goes back to touch unresponsiveness when I resume the tab after resumining from sleep mode. Can any please help meand if there are similar problems with tab 3
you cannot clear cache from stock recovery.
Only data. (act as reset anyways)
just odin another firmware see if it continues.
Update works most of the time, if you let it sits for around 15 minutes after updating.
Many people got problem after system updates was caused by themselves really.
Rules for updating.
1) let it sits for 15 minutes after update.
2) Do not do manual reboot right after update. (After auto reboot) (Wait for 15 Minutes -- minimal)
3) Do not run/install/download right after update. (Leaving it alone for 15 minutes)
4) make sure nothing is running before tapping system update. (reboot, wait 3 minutes, then press system update) / or clear ram from task manager before tapping system update
*Reasons: update is installed, but it might have to convert/translate certain already existing data. We don't know, but just to avoid data corruption, just leave it alone and do not interrupt the process by doing anything above.