USB Activesync cable, not detecting phone but charging...

[Beto N]

I have the same problem, I am running WM5 on an Eten Om600+ and Vista no my laptop.
the phone charges, but there is not communication between computer and phone. all was fine, till one day... no sync no more.

Any suggestions?

[quantico2708]

Originally Posted by bushido1 Have you tried disabling the advanced network functionality option?

where do i find that?

[ripsurfer08]

ok Im having the same problem here with my Titan.. how did you all get it to work again?

[hungtdh2006]

i got a SPV M1000. one cradle and one USB cable. I prefer using USB cable to cradle. I got same problem as you with my USB cable. USB cable can charge but can not synch. I dismantled my USB cable and found out that. one data tag(pin) was loose. and people should know that. USB cable have 22 tags(pins): 2,5,16,17,18 are connect to (-) negative and 13,20,21,22 (+) positive. the tag number 14 and 15 is the date line. If one of 14 or 15 tag is loosen(mean it donot touch to your ppc when you plug the cable in) then your ppc only can charge and cannot synch. So, I pushed the tag 14th on my cable back, seal with some superglue. after that, my usb cable work again until now.
by the way, i disconnected the pin number 20,21,22 from (+) positive. disconnect one data pin ( 14 or 15). after that, my USB cable can be used to charge my PPC through PC or the any chargers with voltage >5V. is that usefull huh?. and when i want to Synch, i reconect that pins again. for more convenient, i do it with a Switch with 2 poles.