5,595,918 Members 31,060 Now Online
XDA Developers Android and Mobile Development Forum

[Q] Cannot install cm11. Stuck in blue kindle fire logo

Tip us?
 
stresser
Old
#1  
Junior Member - OP
Thanks Meter 0
Posts: 8
Join Date: Nov 2010
Default [Q] Cannot install cm11. Stuck in blue kindle fire logo

I am unable to install either hashcode's or twa_priv's cm 11.0. Installing with TWRP results in the blue kindle fire logo.
I have TWRP 2.6.3.1 installed and I did a full wipe (system, data and reset).
I can reinstall CM 10.1 and do a restore, but trying to install 11.0 results in the blue logo.
Any suggestions?
 
smirciat
Old
#2  
smirciat's Avatar
Senior Member
Thanks Meter 35
Posts: 119
Join Date: Nov 2013
Location: Homer, Alaska
Quote:
Originally Posted by stresser View Post
I am unable to install either hashcode's or twa_priv's cm 11.0. Installing with TWRP results in the blue kindle fire logo.
I have TWRP 2.6.3.1 installed and I did a full wipe (system, data and reset).
I can reinstall CM 10.1 and do a restore, but trying to install 11.0 results in the blue logo.
Any suggestions?
Did you also wipe Cache and Dalvik? Did you check md5sum on your ROM download?
 
LinearEquation
Old
(Last edited by LinearEquation; 23rd December 2013 at 01:25 AM.)
#3  
LinearEquation's Avatar
Senior Member
Thanks Meter 324
Posts: 1,320
Join Date: Aug 2013
Location: Midwest

 
DONATE TO ME
Quote:
Originally Posted by stresser View Post
I am unable to install either hashcode's or twa_priv's cm 11.0. Installing with TWRP results in the blue kindle fire logo.
I have TWRP 2.6.3.1 installed and I did a full wipe (system, data and reset).
I can reinstall CM 10.1 and do a restore, but trying to install 11.0 results in the blue logo.
Any suggestions?


Looks like you did a full wipe of everything but SD card. Before flashing the ROM you only need to "swipe" Then after the install you wipe Cache and Dalvik only. Then boot into the system. I would try to install Hashcodes CM 11 first from here http://forum.xda-developers.com/show....php?t=2543481 using the crackflasher mirror. Also check the md5sum of the zip.

If this does not work, it may require you to do a full system restore and go from there.
[ROOT]
2013 KFHD7 KFSOWI with firmware 11.x.x.x KFSOWI (no camera/no HDMI output) http://forum.xda-developers.com/show....php?t=2544736 Post 10 at the link has instructions to block Amazon OTA updates on KFHD 7 KFSOWI
Remove Ads from Lockscreen KFHD7 2013 KFSOWI http://forum.xda-developers.com/show...php?p=48623841
 
stresser
Old
#4  
Junior Member - OP
Thanks Meter 0
Posts: 8
Join Date: Nov 2010
Quote:
Originally Posted by smirciat View Post
Did you also wipe Cache and Dalvik? Did you check md5sum on your ROM download?
Yes did and the md5 sum was correct.
 
stresser
Old
#5  
Junior Member - OP
Thanks Meter 0
Posts: 8
Join Date: Nov 2010
Quote:
Originally Posted by LinearEquation View Post
Looks like you did a full wipe of everything but SD card. Before flashing the ROM you only need to "swipe" Then after the install you wipe Cache and Dalvik only. Then boot into the system. I would try to install Hashcodes CM 11 first from here http://forum.xda-developers.com/show....php?t=2543481 using the crackflasher mirror. Also check the md5sum of the zip.
Thanks for the suggestions, I agree I probably deleted everything but the SD card. the crackflasher mirror doesn't seem to work. The md5 sum was correct.
 
LinearEquation
Old
#6  
LinearEquation's Avatar
Senior Member
Thanks Meter 324
Posts: 1,320
Join Date: Aug 2013
Location: Midwest

 
DONATE TO ME
Quote:
Originally Posted by stresser View Post
Thanks for the suggestions, I agree I probably deleted everything but the SD card. the crackflasher mirror doesn't seem to work. The md5 sum was correct.
This is the third instance of such an occurrence in recent times. Let's try 4.3 JB just to make sure there is nothing else going on (if you want?) Here is the latest release for Hashcodes 4.3 JB for KFHD 8.9 jem http://goo.im/devs/Hashcode/jem/cm10...FICIAL-jem.zip Feel like giving that a try? Only "swipe" in TWRP before flashing and then wipe only CACHE and Dalvick after flashing and before booting into system.

If this does not work, it may require you to do a full system restore and go from there.
[ROOT]
2013 KFHD7 KFSOWI with firmware 11.x.x.x KFSOWI (no camera/no HDMI output) http://forum.xda-developers.com/show....php?t=2544736 Post 10 at the link has instructions to block Amazon OTA updates on KFHD 7 KFSOWI
Remove Ads from Lockscreen KFHD7 2013 KFSOWI http://forum.xda-developers.com/show...php?p=48623841
 
stresser
Old
#7  
Junior Member - OP
Thanks Meter 0
Posts: 8
Join Date: Nov 2010
Quote:
Originally Posted by LinearEquation View Post
This is the third instance of such an occurrence in recent times. Let's try 4.3 JB just to make sure there is nothing else going on (if you want?) Here is the latest release for Hashcodes 4.3 JB for KFHD 8.9 jem http://goo.im/devs/Hashcode/jem/cm10...FICIAL-jem.zip Feel like giving that a try? Only "swipe" in TWRP before flashing and then wipe only CACHE and Dalvick after flashing and before booting into system.

If this does not work, it may require you to do a full system restore and go from there.
The 4.3 JB did not work. Had to do a full system restore to stock, reroot, and then install bootloader and then the cm10.2. One of the ROM updates must have really corrupted my kindle. The fact that some people have had similar problems must mean that there was a corrupt download or something.

Anyway the kindle is working now. Thanks for your help.
 
stresser
Old
#8  
Junior Member - OP
Thanks Meter 0
Posts: 8
Join Date: Nov 2010
Quote:
Originally Posted by stresser View Post
The 4.3 JB did not work. Had to do a full system restore to stock, reroot, and then install bootloader and then the cm10.2. One of the ROM updates must have really corrupted my kindle. The fact that some people have had similar problems must mean that there was a corrupt download or something.

Anyway the kindle is working now. Thanks for your help.
After installing 10.2 was able to install hashcodes cm 11 without any problems.

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes


XDA PORTAL POSTS

Fix the Ambient Light Issues on Your Google Nexus 5 using Xposed

The Google Nexus 5 is a great and rather popular device. This LG-produced … more

Google Glass XE16 Update Factory Image and Rooted Bootloader Now Available

You may recall that early yesterday, we talked about the XE16 … more

Add Swipe Utilities to Your App with SimpleFingerGestures Library

Gestures have become an increasingly important element in smartphone UI … more