5,603,646 Members 36,965 Now Online
XDA Developers Android and Mobile Development Forum

[Q] Huawei Ascend Y300 Bricked

Tip us?
 
Robje007
Old
(Last edited by Robje007; 23rd December 2013 at 02:11 PM.)
#1  
Junior Member - OP
Thanks Meter 0
Posts: 2
Join Date: Dec 2013
Unhappy [Q] Huawei Ascend Y300 Bricked

Hello my name is Robin,

Yesterday I tried to install Chainfire 3D but with no luck, I saw after that time it was not made so for Jellybean. very stupid of me now, so do not start my phone when I put it in force update I get a pink screen I can still come from my phone in the normal recovery, but that's the only thing I can. tried wipe cache and reset without result. Can you help me because I already busy two days and it still can not.

Sorry for my bad english I'm dutch.

Greetings Robin
 
Robje007
Old
#2  
Junior Member - OP
Thanks Meter 0
Posts: 2
Join Date: Dec 2013
Default Van anybody help me

please can enyaone give a answer fast? I wan't to give this phone as a christmas present to my cousin

Hope somebody will help me
 
Fr3ddY303
Old
(Last edited by Fr3ddY303; 24th December 2013 at 11:44 PM.)
#3  
Member
Thanks Meter 20
Posts: 78
Join Date: Dec 2010
Robje007 you only get the pink screen if their is no update found below is how to use force update

Upgrade instructions

1. Unzip the downloaded file
2. Place the Update.app inside a folder named "dload" on your SD card root directory
3. Power off and turn on your Ascend Y300 holding volume down + volume up + power button

This was taken from Huawei upgrade guide

Force upgrade
Step 1. A MICRO SD card of 2G or more should be available. The MICRO SD card
made by Sandisk, Kingstone, or Kingmax is recommended.
Step 2. Format the MICRO SD card (This operation is optional).
Step 3. Copy the Software: main package to a directory named dload.
Step 4. Copy the entire dload folder (with UPDATE.APP in it) to the root directory of
the MICRO SD card.
Step 5. Make sure your handset is power off. Insert the MICRO SD card into the
handset. Press the VOLUME UP and VOLUME DOWN key, and then press the
POWER key to power on the phone and enter the Software Upgrade Mode.
Step 6. When the progress bar stop, the phone will restart, if not , you need to
remove the battery manually.
Step 7. Copy the Software:vendor package to a directory named dload. Then
Execute Step 4 – Step6 repeatedly.

If want to install a custom or repack Rom for the phone Then

Press vol up + power to boot into recovery and install the Rom from their. (Keep pressing the buttons until the phone boots into recovery)

If you want to boot into sideloader and use adb to push a Rom then

Press vol down + power if the Hauwei logo stays on the screen then you are in sideloader mode keep pressing the keys for at least 10 to 15 seconds.

Hope this is of help to you
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes