Default Bricked Tablet Nand Flash Error

I cannot get pass the CWM recovery. CWM wont flash any ROMs even the backup I made originally. I have copied the log to show you what I am seeing. tried to fastboot etc. no success. Please take a look and give me you expert advise, seems to brick my device. (Visual Land Connect 7).


<7>[ 29.060627] [FORMAT_ERR] There is not enough valid block for using!
<7>[ 29.066889] [FORMAT_ERR] There is not enough free blocks for distribute!
<7>[ 29.073619] [FORMAT_ERR] Format nand disk failed!
<7>[ 29.078320] [NAND]init_blklayer fail
<6>[ 29.082158] init: command 'insmod' r=0
<6>[ 29.085966] init: command 'mkdir' r=0
<6>[ 29.089655] init: command 'mkdir' r=0
<6>[ 29.093366] init: command 'mkdir' r=0
<6>[ 29.097042] init: command 'mkdir' r=0
<6>[ 29.100744] init: command 'mkdir' r=0
<6>[ 29.104428] init: command 'mkdir' r=0
<6>[ 29.108118] init: command 'mkdir' r=0
<6>[ 29.111818] init: command 'mkdir' r=0
<6>[ 29.115515] init: command 'mkdir' r=0
<6>[ 29.119254] init: command 'mount' r=0
<6>[ 29.122981] init: command 'chown' r=0
<6>[ 29.126662] init: command 'chmod' r=0
<6>[ 29.130463] init: command 'write' r=0
<6>[ 29.134199] init: command 'write' r=0
<6>[ 29.137903] init: command 'write' r=-2
<6>[ 29.141711] init: processing action 0x290f0 (property_service_init)
<3>[ 29.148092] init: Unable to open persistent property directory /data/property errno: 2
<6>[ 29.156137] init: Created socket '/dev/socket/property_service' with mode '666', user '0', group '0'
<6>[ 29.165309] init: command 'property_service_init' r=0
<6>[ 29.170457] init: processing action 0x29138 (signal_init)
<6>[ 29.175926] init: command 'signal_init' r=0
<6>[ 29.180170] init: processing action 0x29180 (check_startup)
<6>[ 29.185780] init: command 'check_startup' r=0
<6>[ 29.190208] init: processing action 0x28b20 (boot)
<6>[ 29.195513] init: command 'ifup' r=0
<6>[ 29.199209] init: command 'hostname' r=0
<6>[ 29.203287] init: command 'domainname' r=0
<3>[ 29.207511] android_usb: already disabled
<6>[ 29.211589] init: command 'write' r=0
<6>[ 29.215331] init: command 'write' r=0
<6>[ 29.219058] init: command 'write' r=0
<6>[ 29.222848] init: command 'write' r=0
<6>[ 29.226562] init: command 'setprop' r=0
<7>[ 29.230507] ep_matches, wrn: endpoint already claimed, ep(0xc08ec540, 0xd91d7400, ep1-bulk)
<6>[ 29.238865] adb_bind_config
<7>[ 29.241715] ep_matches, wrn: endpoint already claimed, ep(0xc08ec540, 0xd91d7400, ep1-bulk)
<7>[ 29.250083] ep_matches, wrn: endpoint already claimed, ep(0xc08ec580, 0xd91d7400, ep2-bulk)
<7>[ 29.258433] ep_matches, wrn: endpoint already claimed, ep(0xc08ec540, 0xd91d7400, ep1-bulk)
<7>[ 29.266798] ep_matches, wrn: endpoint already claimed, ep(0xc08ec580, 0xd91d7400, ep2-bulk)
<7>[ 29.275165] ep_matches, wrn: endpoint already claimed, ep(0xc08ec5c0, 0xd91ceb80, ep3-bulk)
<7>[ 29.283527] [sw_udc]: alloc request: ep(0xc08ec600, ep4-bulk, 512), req(0xd932d540)
<7>[ 29.291219] [sw_udc]: alloc request: ep(0xc08ec5c0, ep3-bulk, 512), req(0xd932d580)
<7>[ 29.298883] [sw_udc]: alloc request: ep(0xc08ec5c0, ep3-bulk, 512), req(0xd932d5c0)
<7>[ 29.306573] [sw_udc]: alloc request: ep(0xc08ec5c0, ep3-bulk, 512), req(0xd932d600)
<7>[ 29.314255] [sw_udc]: alloc request: ep(0xc08ec5c0, ep3-bulk, 512), req(0xd932d640)
<7>[ 29.321945] [sw_udc]: sw_udc_pullup, is_on = 1
<7>[ 29.326407] [sw_udc]: CONFIG_USB_GADGET_DUALSPEED
<7>[ 29.331141] [sw_udc]: usbd_start_work
<6>[ 29.334828] init: command 'write' r=0
<5>[ 29.338521] init: starting 'adbd'
<6>[ 29.342141] init: command 'start' r=0
<6>[ 29.345831] init: command 'setprop' r=0
<6>[ 29.351528] adb_open
<6>[ 29.356019] ===========================ft5x_ts_init=========== ==========
<6>[ 29.362840] ft5x_ts VERSION =mbg_inet@20120829.2016
<7>[ 29.367715] m_inet_ctpState return false,continue deteck
<6>[ 29.373151] ctp_fetch_sysconfig_para.
<6>[ 29.376927] ctp_fetch_sysconfig_para: after: ctp_twi_addr is 0x38, dirty_addr_buf: 0x38. dirty_addr_buf[1]: 0xfffe
<6>[ 29.387378] ctp_fetch_sysconfig_para: ctp_twi_id is 2.
<7>[ 29.392621] [sw_udc]: IRQ: suspend
<7>[ 29.396032] [sw_udc]: ERR: usb speed is unkown
<6>[ 29.400539] ctp_fetch_sysconfig_para: screen_max_x = 800.
<6>[ 29.406031] ctp_fetch_sysconfig_para: screen_max_y = 480.
<6>[ 29.411558] ctp_fetch_sysconfig_para: revert_x_flag = 0.
<6>[ 29.416956] ctp_fetch_sysconfig_para: revert_y_flag = 0.
<6>[ 29.422412] ctp_fetch_sysconfig_para: exchange_x_y_flag = 0.
<6>[ 29.428162] ctp_fetch_sysconfig_para: screen_rotate_flag = 0.
<3>[ 29.434032] ft5x_ts: script_parser_fetch err.
<6>[ 29.438474] ctp_fetch_sysconfig_para: minetPowerEnreserver = 0.
<7>[ 29.444517] script parser fetch err.
<4>[ 29.448177] touch panel tp_en request gpio fail!
<6>[ 29.452813] ft5x_ts_init: after fetch_sysconfig_para: normal_i2c: 0x38. normal_i2c[1]: 0xfffe
<7>[ 29.461558] script parser fetch err.
<4>[ 29.465217] ctp_init_platform_resource: tp_reset request gpio fail!
<6>[ 29.471501] ctp_wakeup.
<6>[ 29.514158] ctp_detect: Detected chip ft5x_ts at adapter 2, address 0x38
<7>[ 29.520888] [sw_udc]: IRQ: reset
<7>[ 29.524127] [sw_udc]: irq: reset happen, throw away all urb
<6>[ 29.529874] ====ft5x_ts_probe begin=====.
<7>[ 29.534087] I2C communication client->addr=56
<7>[ 29.627407] [sw_udc]:
<7>[ 29.629592] +++++++++++++++++++++++++++++++++++++
<7>[ 29.634474] [sw_udc]: usb enter high speed.
<7>[ 29.637396] [sw_udc]:
<7>[ 29.637396] +++++++++++++++++++++++++++++++++++++
<6>[ 29.645944] android_work: sent uevent USB_STATE=CONNECTED
<7>[ 29.651365] [sw_udc]: IRQ: reset
<7>[ 29.654604] [sw_udc]: irq: reset happen, throw away all urb
<7>[ 29.755413] [sw_udc]: Set address 5
<6>[ 29.776733] android_usb gadget: high speed config #1: android
<7>[ 29.782492] [sw_udc]: ep enable: ep3(0xc08ec5c0, ep3-bulk, 128, 512)
<7>[ 29.786716] [sw_udc]: ep enable: ep4(0xc08ec600, ep4-bulk, 0, 512)
<7>[ 29.786716] [sw_udc]: ep enable: ep1(0xc08ec540, ep1-bulk, 128, 512)
<6>[ 29.801574] android_work: sent uevent USB_STATE=CONFIGURED
<7>[ 29.807067] [sw_udc]: ep enable: ep2(0xc08ec580, ep2-bulk, 0, 512)
<7>[ 29.813301] [sw_udc]: alloc request: ep(0xc08ec540, ep1-bulk, 512), req(0xd91b3b40)
<7>[ 29.820987] [sw_udc]: alloc request: ep(0xc08ec580, ep2-bulk, 512), req(0xd91b3b80)
<7>[ 29.828656] [sw_udc]: alloc request: ep(0xc08ec540, ep1-bulk, 512), req(0xd91b3bc0)
<7>[ 29.836339] [sw_udc]: alloc request: ep(0xc08ec580, ep2-bulk, 512), req(0xd91b3c00)
<7>[ 30.040472] ft5x06 Chip ID=0x79
<7>[ 30.043611] I2C communication ok
<6>[ 30.047457] input: ft5x_ts as /devices/virtual/input/input2
<6>[ 30.053653] ==register_early_suspend =
<6>[ 30.057409] CONFIG_FT5X0X_MULTITOUCH is defined.
<6>[ 30.062193] ctp_set_irq_mode: config gpio to int mode.
<6>[ 30.067432] INTERRUPT CONFIG
<6>[ 30.070739] ==ft5x_ts_probe over =
<6>[ 30.074201] init: command 'insmod' r=0
<5>[ 30.078022] init: starting 'erase_misc'
<5>[ 30.082260] init: starting 'recovery'
<6>[ 30.086140] init: command 'class_start' r=0
<6>[ 30.095510] init: waitpid returned pid 63, status = 00000000
<5>[ 30.102973] init: process 'erase_misc', pid 63 exited
<6>[ 30.103044] init: processing action 0x291c8 (queue_property_triggers)
<6>[ 30.103062] init: command 'queue_property_triggers' r=0
<7>[ 34.791539] WRN:L1351(drivers/usb/sun4i_usb/udc/sw_udc.c):handle_ep0: ep0 setup end
<7>[ 34.799223] nuke: ep num is 0
<7>[ 72.208068] battery vol change: 13->14
<4>[ 200.118128] adbd (72): /proc/72/oom_adj is deprecated, please use /proc/72/oom_score_adj instead.
<7>[ 332.747982] battery vol change: 14->15
<7>[ 603.287563] battery vol change: 15->16
~ #