Would like to know what is the best version of firmware to install? Was trying to figure out why the signal strength is worse after going to ARHD 41.
- ARHD 41 - Android 4.4 (KitKat) - latest official HTC One 4.06.1540.3 (WWE) firmware (4x.x series)
- TWRP 220.127.116.11
- Sku_ID to 7
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.44.0000
(bootloader) version-baseband: 4A.14.3250.13
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 1.26.502.10
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0712000
(bootloader) cidnum: CWS__001
(bootloader) battery-status: good
(bootloader) battery-voltage: 4002mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
getvar:all FAILED (status read failed (Too many links))
finished. total time: 0.070s
Based on what I read here: http://forum.xda-developers.com/show....php?t=2419699
It seems a firmware update is in order. The question is:
- Should I update to this firmware version, since ARHD 41 is based on that firmware and just change the CID? (latest) 4.4 KITKAT DEVELOPER EDITION OTA 4.06.1540.3 Custom Firmware (Stock Boot.img & Stock Recovery removed), if yes, how to I properly change the CID, instructions?
- Should I follow what the thread suggested flash 1st, ATT 4.2.2 OTA 1.26.502.15 Firmware (HBOOT, Recovery, & Boot.img are removed); 2nd, (Credit to @dark2099 for providing the OTApkg.zip)(latest) ATT 4.3 Official OTA 3.17.502.3 Firmware/Not From The RUU (Boot.img & Recovery.img removed); and wait for ATT 4.4 firmware to come out.
- Any suggestion/options?
Any other things I should look out for or prepare before the firmware update?
Thanks again for all the great help having this awesome forum and all the awesome devs/community.